| Message ID | 1489060155-22086-3-git-send-email-shilpa.bhat@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Thu, Mar 09, 2017 at 05:19:15PM +0530, Shilpasri G Bhat wrote: > Add support to read power and temperature sensors from OCC inband > sensors which are copied to main memory by OCC. > Is this supposed to be an alternative to the submission from Eddie James ? If so, is there a reason to consider such an alternative ? Thanks, Guenter > Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> > CC: Rob Herring <robh+dt@kernel.org> > CC: Mark Rutland <mark.rutland@arm.com> > CC: Jean Delvare <jdelvare@suse.com> > CC: Guenter Roeck <linux@roeck-us.net> > CC: Jonathan Corbet <corbet@lwn.net> > CC: devicetree@vger.kernel.org > CC: linux-hwmon@vger.kernel.org > CC: linux-doc@vger.kernel.org > --- > .../devicetree/bindings/hwmon/ibmpowernv-occ.txt | 4 + > Documentation/hwmon/ibmpowernv-occ | 24 ++ > drivers/hwmon/Kconfig | 11 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/ibmpowernv-occ.c | 302 +++++++++++++++++++++ > 5 files changed, 342 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt > create mode 100644 Documentation/hwmon/ibmpowernv-occ > create mode 100644 drivers/hwmon/ibmpowernv-occ.c > > diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt > new file mode 100644 > index 0000000..d03f744 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt > @@ -0,0 +1,4 @@ > +IBM POWERNV OCC inband platform sensors > + > +Required device-tree property: > +- compatible: "ibm,p9-occ-inband-sensor" > diff --git a/Documentation/hwmon/ibmpowernv-occ b/Documentation/hwmon/ibmpowernv-occ > new file mode 100644 > index 0000000..151028b > --- /dev/null > +++ b/Documentation/hwmon/ibmpowernv-occ > @@ -0,0 +1,24 @@ > +Kernel driver ibmpowernv-occ > +============================= > + > +Supported systems: > + * P9 server based on POWERNV platform > + > +Description > +------------ > + > +This driver exports the power and temperature sensors from OCC inband > +sensors on P9 POWERNV platforms. > + > +Sysfs attributes > +---------------- > + > +powerX_input Latest power reading > +powerX_input_highest Minimum power > +powerX_input_lowest Maximum power > +powerX_label Sensor name > + > +tempX_input Latest temperature reading > +tempX_max Minimum temperature > +tempX_min Maximum temperature > +tempX_label Sensor name > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 0649d53f3..3b1dbb9 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -598,6 +598,17 @@ config SENSORS_IBMPOWERNV > This driver can also be built as a module. If so, the module > will be called ibmpowernv. > > +config SENSORS_IBMPOWERNV_OCC > + tristate "IBM POWERNV OCC Inband platform sensors" > + depends on PPC_POWERNV > + default y > + help > + If you say yes here you get support for the temperature/power > + OCC inband sensors on your PowerNV platform. > + > + This driver can also be built as a module. If so, the module > + will be called ibmpowernv-occ. > + > config SENSORS_IIO_HWMON > tristate "Hwmon driver that uses channels specified via iio maps" > depends on IIO > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 5509edf..0da2207 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -75,6 +75,7 @@ obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o > obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o > obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o > obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o > +obj-$(CONFIG_SENSORS_IBMPOWERNV_OCC)+= ibmpowernv-occ.o > obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o > obj-$(CONFIG_SENSORS_INA209) += ina209.o > obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o > diff --git a/drivers/hwmon/ibmpowernv-occ.c b/drivers/hwmon/ibmpowernv-occ.c > new file mode 100644 > index 0000000..97b1bbe > --- /dev/null > +++ b/drivers/hwmon/ibmpowernv-occ.c > @@ -0,0 +1,302 @@ > +/* > + * IBM PowerNV platform OCC inband sensors for temperature/power > + * Copyright (C) 2017 IBM > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. > + */ > + > +#define DRVNAME "ibmpowernv_occ" > +#define pr_fmt(fmt) DRVNAME ": " fmt > + > +#include <linux/module.h> > +#include <linux/hwmon.h> > +#include <linux/slab.h> > +#include <linux/platform_device.h> > + > +#include <asm/opal.h> > + > +#define MAX_HWMON_ATTR_LEN 32 > +#define MAX_HWMON_LABEL_LEN (MAX_OCC_SENSOR_NAME_LEN * 2) > +#define HWMON_ATTRS_PER_SENSOR 16 > +#define TO_MILLI_UNITS(x) ((x) * 1000) > +#define TO_MICRO_UNITS(x) ((x) * 1000000) > + > +enum sensors { > + TEMP, > + POWER, > + MAX_SENSOR_TYPE, > +}; > + > +static struct sensor_type { > + const char *name; > + int hwmon_id; > +} sensor_types[] = { > + { "temp"}, > + { "power"}, > +}; > + > +static struct sensor_data { > + u32 occ_id; > + u64 offset; /* Offset to ping/pong reading buffer */ > + enum sensors type; > + char label[MAX_HWMON_LABEL_LEN]; > + char name[MAX_HWMON_ATTR_LEN]; > + struct device_attribute attr; > +} *sdata; > + > +static struct attribute_group sensor_attrs_group; > +__ATTRIBUTE_GROUPS(sensor_attrs); > + > +#define show(file_name) \ > +static ssize_t ibmpowernv_occ_show_##file_name \ > +(struct device *dev, struct device_attribute *dattr, char *buf) \ > +{ \ > + struct sensor_data *sdata = container_of(dattr, \ > + struct sensor_data, \ > + attr); \ > + u64 val; \ > + int ret; \ > + ret = opal_occ_sensor_get_##file_name(sdata->occ_id, \ > + sdata->offset, \ > + &val); \ > + if (ret) \ > + return ret; \ > + if (sdata->type == TEMP) \ > + val = TO_MILLI_UNITS(val); \ > + else if (sdata->type == POWER) \ > + val = TO_MICRO_UNITS(val); \ > + return sprintf(buf, "%llu\n", val); \ > +} > + > +show(sample); > +show(max); > +show(min); > +show(js_min); > +show(js_max); > +show(csm_min); > +show(csm_max); > +show(prof_min); > +show(prof_max); > + > +static struct sensor_view_groups { > + const char *name; > + ssize_t (*show_sample)(struct device *dev, > + struct device_attribute *attr, > + char *buf); > + ssize_t (*show_min)(struct device *dev, > + struct device_attribute *attr, > + char *buf); > + ssize_t (*show_max)(struct device *dev, > + struct device_attribute *attr, > + char *buf); > +} sensor_views[] = { > + { > + .name = "", > + .show_sample = ibmpowernv_occ_show_sample, > + .show_min = ibmpowernv_occ_show_min, > + .show_max = ibmpowernv_occ_show_max > + }, > + { > + .name = "_JS", > + .show_sample = ibmpowernv_occ_show_sample, > + .show_min = ibmpowernv_occ_show_js_min, > + .show_max = ibmpowernv_occ_show_js_max > + }, > + { .name = "_CSM", > + .show_sample = ibmpowernv_occ_show_sample, > + .show_min = ibmpowernv_occ_show_csm_min, > + .show_max = ibmpowernv_occ_show_csm_max > + }, > + { .name = "_Prof", > + .show_sample = ibmpowernv_occ_show_sample, > + .show_min = ibmpowernv_occ_show_prof_min, > + .show_max = ibmpowernv_occ_show_prof_max > + }, > +}; > + > +static ssize_t ibmpowernv_occ_show_label(struct device *dev, > + struct device_attribute *dattr, > + char *buf) > +{ > + struct sensor_data *sdata = container_of(dattr, struct sensor_data, > + attr); > + > + return sprintf(buf, "%s\n", sdata->label); > +} > + > +static int ibmpowernv_occ_get_sensor_type(enum occ_sensor_type type) > +{ > + switch (type) { > + case OCC_SENSOR_TYPE_POWER: > + return POWER; > + case OCC_SENSOR_TYPE_TEMPERATURE: > + return TEMP; > + default: > + return MAX_SENSOR_TYPE; > + } > + > + return MAX_SENSOR_TYPE; > +} > + > +static void ibmpowernv_occ_add_sdata(struct occ_hwmon_sensor sensor, > + struct sensor_data *sdata, char *name, > + int hwmon_id, enum sensors type, > + ssize_t (*show)(struct device *dev, > + struct device_attribute *attr, > + char *buf)) > +{ > + sdata->type = type; > + sdata->occ_id = sensor.occ_id; > + sdata->offset = sensor.offset; > + snprintf(sdata->name, MAX_HWMON_ATTR_LEN, "%s%d_%s", > + sensor_types[type].name, hwmon_id, name); > + sysfs_attr_init(&sdata->attr.attr); > + sdata->attr.attr.name = sdata->name; > + sdata->attr.attr.mode = 0444; > + sdata->attr.show = show; > +} > + > +static void ibmpowernv_occ_add_sensor_attrs(struct occ_hwmon_sensor sensor, > + int index) > +{ > + struct attribute **attrs = sensor_attrs_group.attrs; > + char attr_str[MAX_HWMON_ATTR_LEN]; > + enum sensors type = ibmpowernv_occ_get_sensor_type(sensor.type); > + int i; > + > + index *= HWMON_ATTRS_PER_SENSOR; > + for (i = 0; i < ARRAY_SIZE(sensor_views); i++) { > + int hid = ++sensor_types[type].hwmon_id; > + > + /* input */ > + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "input", hid, > + type, sensor_views[i].show_sample); > + attrs[index] = &sdata[index].attr.attr; > + index++; > + > + /* min */ > + if (type == POWER) > + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", > + "input_lowest"); > + else > + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "min"); > + > + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, > + type, sensor_views[i].show_min); > + attrs[index] = &sdata[index].attr.attr; > + index++; > + > + /* max */ > + if (type == POWER) > + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", > + "input_highest"); > + else > + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "max"); > + > + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, > + type, sensor_views[i].show_max); > + attrs[index] = &sdata[index].attr.attr; > + index++; > + > + /* label */ > + snprintf(sdata[index].label, MAX_HWMON_LABEL_LEN, "%s%s", > + sensor.name, sensor_views[i].name); > + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "label", hid, > + type, ibmpowernv_occ_show_label); > + attrs[index] = &sdata[index].attr.attr; > + index++; > + } > +} > + > +static int ibmpowernv_occ_add_device_attrs(struct platform_device *pdev) > +{ > + struct attribute **attrs; > + struct occ_hwmon_sensor *slist = NULL; > + int nr_sensors = 0, i; > + int ret = -ENOMEM; > + > + slist = opal_occ_sensor_get_hwmon_list(&nr_sensors); > + if (!nr_sensors) > + return -ENODEV; > + > + if (!slist) > + return ret; > + > + sdata = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*sdata) * > + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); > + if (!sdata) > + goto out; > + > + attrs = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*attrs) * > + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); > + if (!attrs) > + goto out; > + > + sensor_attrs_group.attrs = attrs; > + for (i = 0; i < nr_sensors; i++) > + ibmpowernv_occ_add_sensor_attrs(slist[i], i); > + > + ret = 0; > +out: > + kfree(slist); > + return ret; > +} > + > +static int ibmpowernv_occ_probe(struct platform_device *pdev) > +{ > + struct device *hwmon_dev; > + int err; > + > + err = ibmpowernv_occ_add_device_attrs(pdev); > + if (err) > + goto out; > + > + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, DRVNAME, > + NULL, > + sensor_attrs_groups); > + > + err = PTR_ERR_OR_ZERO(hwmon_dev); > +out: > + if (err) > + pr_warn("Failed to initialize Hwmon OCC inband sensors\n"); > + > + return err; > +} > + > +static const struct platform_device_id occ_sensor_ids[] = { > + { .name = "occ-inband-sensor" }, > + { } > +}; > +MODULE_DEVICE_TABLE(platform, occ_sensor_ids); > + > +static const struct of_device_id occ_sensor_of_ids[] = { > + { .compatible = "ibm,p9-occ-inband-sensor" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, occ_sensor_of_ids); > + > +static struct platform_driver ibmpowernv_occ_driver = { > + .probe = ibmpowernv_occ_probe, > + .id_table = occ_sensor_ids, > + .driver = { > + .name = DRVNAME, > + .of_match_table = occ_sensor_of_ids, > + }, > +}; > + > +module_platform_driver(ibmpowernv_occ_driver); > + > +MODULE_AUTHOR("Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>"); > +MODULE_DESCRIPTION("IBM POWERNV platform OCC inband sensors"); > +MODULE_LICENSE("GPL"); > -- > 1.8.3.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Guenter, On 03/09/2017 05:40 PM, Guenter Roeck wrote: > On Thu, Mar 09, 2017 at 05:19:15PM +0530, Shilpasri G Bhat wrote: >> Add support to read power and temperature sensors from OCC inband >> sensors which are copied to main memory by OCC. >> > > Is this supposed to be an alternative to the submission from > Eddie James ? If so, is there a reason to consider such an > alternative ? > This is not an alternative submission. Eddie James' hwmon OCC driver is to export the sensors in BMC which is a service processor for POWER{8,9} servers. This patch adds a hwmon driver in the POWER9 server. Thanks and Regards, Shilpa > Thanks, > Guenter > >> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> >> CC: Rob Herring <robh+dt@kernel.org> >> CC: Mark Rutland <mark.rutland@arm.com> >> CC: Jean Delvare <jdelvare@suse.com> >> CC: Guenter Roeck <linux@roeck-us.net> >> CC: Jonathan Corbet <corbet@lwn.net> >> CC: devicetree@vger.kernel.org >> CC: linux-hwmon@vger.kernel.org >> CC: linux-doc@vger.kernel.org >> --- >> .../devicetree/bindings/hwmon/ibmpowernv-occ.txt | 4 + >> Documentation/hwmon/ibmpowernv-occ | 24 ++ >> drivers/hwmon/Kconfig | 11 + >> drivers/hwmon/Makefile | 1 + >> drivers/hwmon/ibmpowernv-occ.c | 302 +++++++++++++++++++++ >> 5 files changed, 342 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt >> create mode 100644 Documentation/hwmon/ibmpowernv-occ >> create mode 100644 drivers/hwmon/ibmpowernv-occ.c >> >> diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt >> new file mode 100644 >> index 0000000..d03f744 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt >> @@ -0,0 +1,4 @@ >> +IBM POWERNV OCC inband platform sensors >> + >> +Required device-tree property: >> +- compatible: "ibm,p9-occ-inband-sensor" >> diff --git a/Documentation/hwmon/ibmpowernv-occ b/Documentation/hwmon/ibmpowernv-occ >> new file mode 100644 >> index 0000000..151028b >> --- /dev/null >> +++ b/Documentation/hwmon/ibmpowernv-occ >> @@ -0,0 +1,24 @@ >> +Kernel driver ibmpowernv-occ >> +============================= >> + >> +Supported systems: >> + * P9 server based on POWERNV platform >> + >> +Description >> +------------ >> + >> +This driver exports the power and temperature sensors from OCC inband >> +sensors on P9 POWERNV platforms. >> + >> +Sysfs attributes >> +---------------- >> + >> +powerX_input Latest power reading >> +powerX_input_highest Minimum power >> +powerX_input_lowest Maximum power >> +powerX_label Sensor name >> + >> +tempX_input Latest temperature reading >> +tempX_max Minimum temperature >> +tempX_min Maximum temperature >> +tempX_label Sensor name >> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig >> index 0649d53f3..3b1dbb9 100644 >> --- a/drivers/hwmon/Kconfig >> +++ b/drivers/hwmon/Kconfig >> @@ -598,6 +598,17 @@ config SENSORS_IBMPOWERNV >> This driver can also be built as a module. If so, the module >> will be called ibmpowernv. >> >> +config SENSORS_IBMPOWERNV_OCC >> + tristate "IBM POWERNV OCC Inband platform sensors" >> + depends on PPC_POWERNV >> + default y >> + help >> + If you say yes here you get support for the temperature/power >> + OCC inband sensors on your PowerNV platform. >> + >> + This driver can also be built as a module. If so, the module >> + will be called ibmpowernv-occ. >> + >> config SENSORS_IIO_HWMON >> tristate "Hwmon driver that uses channels specified via iio maps" >> depends on IIO >> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile >> index 5509edf..0da2207 100644 >> --- a/drivers/hwmon/Makefile >> +++ b/drivers/hwmon/Makefile >> @@ -75,6 +75,7 @@ obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o >> obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o >> obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o >> obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o >> +obj-$(CONFIG_SENSORS_IBMPOWERNV_OCC)+= ibmpowernv-occ.o >> obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o >> obj-$(CONFIG_SENSORS_INA209) += ina209.o >> obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o >> diff --git a/drivers/hwmon/ibmpowernv-occ.c b/drivers/hwmon/ibmpowernv-occ.c >> new file mode 100644 >> index 0000000..97b1bbe >> --- /dev/null >> +++ b/drivers/hwmon/ibmpowernv-occ.c >> @@ -0,0 +1,302 @@ >> +/* >> + * IBM PowerNV platform OCC inband sensors for temperature/power >> + * Copyright (C) 2017 IBM >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published by >> + * the Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program. >> + */ >> + >> +#define DRVNAME "ibmpowernv_occ" >> +#define pr_fmt(fmt) DRVNAME ": " fmt >> + >> +#include <linux/module.h> >> +#include <linux/hwmon.h> >> +#include <linux/slab.h> >> +#include <linux/platform_device.h> >> + >> +#include <asm/opal.h> >> + >> +#define MAX_HWMON_ATTR_LEN 32 >> +#define MAX_HWMON_LABEL_LEN (MAX_OCC_SENSOR_NAME_LEN * 2) >> +#define HWMON_ATTRS_PER_SENSOR 16 >> +#define TO_MILLI_UNITS(x) ((x) * 1000) >> +#define TO_MICRO_UNITS(x) ((x) * 1000000) >> + >> +enum sensors { >> + TEMP, >> + POWER, >> + MAX_SENSOR_TYPE, >> +}; >> + >> +static struct sensor_type { >> + const char *name; >> + int hwmon_id; >> +} sensor_types[] = { >> + { "temp"}, >> + { "power"}, >> +}; >> + >> +static struct sensor_data { >> + u32 occ_id; >> + u64 offset; /* Offset to ping/pong reading buffer */ >> + enum sensors type; >> + char label[MAX_HWMON_LABEL_LEN]; >> + char name[MAX_HWMON_ATTR_LEN]; >> + struct device_attribute attr; >> +} *sdata; >> + >> +static struct attribute_group sensor_attrs_group; >> +__ATTRIBUTE_GROUPS(sensor_attrs); >> + >> +#define show(file_name) \ >> +static ssize_t ibmpowernv_occ_show_##file_name \ >> +(struct device *dev, struct device_attribute *dattr, char *buf) \ >> +{ \ >> + struct sensor_data *sdata = container_of(dattr, \ >> + struct sensor_data, \ >> + attr); \ >> + u64 val; \ >> + int ret; \ >> + ret = opal_occ_sensor_get_##file_name(sdata->occ_id, \ >> + sdata->offset, \ >> + &val); \ >> + if (ret) \ >> + return ret; \ >> + if (sdata->type == TEMP) \ >> + val = TO_MILLI_UNITS(val); \ >> + else if (sdata->type == POWER) \ >> + val = TO_MICRO_UNITS(val); \ >> + return sprintf(buf, "%llu\n", val); \ >> +} >> + >> +show(sample); >> +show(max); >> +show(min); >> +show(js_min); >> +show(js_max); >> +show(csm_min); >> +show(csm_max); >> +show(prof_min); >> +show(prof_max); >> + >> +static struct sensor_view_groups { >> + const char *name; >> + ssize_t (*show_sample)(struct device *dev, >> + struct device_attribute *attr, >> + char *buf); >> + ssize_t (*show_min)(struct device *dev, >> + struct device_attribute *attr, >> + char *buf); >> + ssize_t (*show_max)(struct device *dev, >> + struct device_attribute *attr, >> + char *buf); >> +} sensor_views[] = { >> + { >> + .name = "", >> + .show_sample = ibmpowernv_occ_show_sample, >> + .show_min = ibmpowernv_occ_show_min, >> + .show_max = ibmpowernv_occ_show_max >> + }, >> + { >> + .name = "_JS", >> + .show_sample = ibmpowernv_occ_show_sample, >> + .show_min = ibmpowernv_occ_show_js_min, >> + .show_max = ibmpowernv_occ_show_js_max >> + }, >> + { .name = "_CSM", >> + .show_sample = ibmpowernv_occ_show_sample, >> + .show_min = ibmpowernv_occ_show_csm_min, >> + .show_max = ibmpowernv_occ_show_csm_max >> + }, >> + { .name = "_Prof", >> + .show_sample = ibmpowernv_occ_show_sample, >> + .show_min = ibmpowernv_occ_show_prof_min, >> + .show_max = ibmpowernv_occ_show_prof_max >> + }, >> +}; >> + >> +static ssize_t ibmpowernv_occ_show_label(struct device *dev, >> + struct device_attribute *dattr, >> + char *buf) >> +{ >> + struct sensor_data *sdata = container_of(dattr, struct sensor_data, >> + attr); >> + >> + return sprintf(buf, "%s\n", sdata->label); >> +} >> + >> +static int ibmpowernv_occ_get_sensor_type(enum occ_sensor_type type) >> +{ >> + switch (type) { >> + case OCC_SENSOR_TYPE_POWER: >> + return POWER; >> + case OCC_SENSOR_TYPE_TEMPERATURE: >> + return TEMP; >> + default: >> + return MAX_SENSOR_TYPE; >> + } >> + >> + return MAX_SENSOR_TYPE; >> +} >> + >> +static void ibmpowernv_occ_add_sdata(struct occ_hwmon_sensor sensor, >> + struct sensor_data *sdata, char *name, >> + int hwmon_id, enum sensors type, >> + ssize_t (*show)(struct device *dev, >> + struct device_attribute *attr, >> + char *buf)) >> +{ >> + sdata->type = type; >> + sdata->occ_id = sensor.occ_id; >> + sdata->offset = sensor.offset; >> + snprintf(sdata->name, MAX_HWMON_ATTR_LEN, "%s%d_%s", >> + sensor_types[type].name, hwmon_id, name); >> + sysfs_attr_init(&sdata->attr.attr); >> + sdata->attr.attr.name = sdata->name; >> + sdata->attr.attr.mode = 0444; >> + sdata->attr.show = show; >> +} >> + >> +static void ibmpowernv_occ_add_sensor_attrs(struct occ_hwmon_sensor sensor, >> + int index) >> +{ >> + struct attribute **attrs = sensor_attrs_group.attrs; >> + char attr_str[MAX_HWMON_ATTR_LEN]; >> + enum sensors type = ibmpowernv_occ_get_sensor_type(sensor.type); >> + int i; >> + >> + index *= HWMON_ATTRS_PER_SENSOR; >> + for (i = 0; i < ARRAY_SIZE(sensor_views); i++) { >> + int hid = ++sensor_types[type].hwmon_id; >> + >> + /* input */ >> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "input", hid, >> + type, sensor_views[i].show_sample); >> + attrs[index] = &sdata[index].attr.attr; >> + index++; >> + >> + /* min */ >> + if (type == POWER) >> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", >> + "input_lowest"); >> + else >> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "min"); >> + >> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, >> + type, sensor_views[i].show_min); >> + attrs[index] = &sdata[index].attr.attr; >> + index++; >> + >> + /* max */ >> + if (type == POWER) >> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", >> + "input_highest"); >> + else >> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "max"); >> + >> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, >> + type, sensor_views[i].show_max); >> + attrs[index] = &sdata[index].attr.attr; >> + index++; >> + >> + /* label */ >> + snprintf(sdata[index].label, MAX_HWMON_LABEL_LEN, "%s%s", >> + sensor.name, sensor_views[i].name); >> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "label", hid, >> + type, ibmpowernv_occ_show_label); >> + attrs[index] = &sdata[index].attr.attr; >> + index++; >> + } >> +} >> + >> +static int ibmpowernv_occ_add_device_attrs(struct platform_device *pdev) >> +{ >> + struct attribute **attrs; >> + struct occ_hwmon_sensor *slist = NULL; >> + int nr_sensors = 0, i; >> + int ret = -ENOMEM; >> + >> + slist = opal_occ_sensor_get_hwmon_list(&nr_sensors); >> + if (!nr_sensors) >> + return -ENODEV; >> + >> + if (!slist) >> + return ret; >> + >> + sdata = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*sdata) * >> + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); >> + if (!sdata) >> + goto out; >> + >> + attrs = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*attrs) * >> + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); >> + if (!attrs) >> + goto out; >> + >> + sensor_attrs_group.attrs = attrs; >> + for (i = 0; i < nr_sensors; i++) >> + ibmpowernv_occ_add_sensor_attrs(slist[i], i); >> + >> + ret = 0; >> +out: >> + kfree(slist); >> + return ret; >> +} >> + >> +static int ibmpowernv_occ_probe(struct platform_device *pdev) >> +{ >> + struct device *hwmon_dev; >> + int err; >> + >> + err = ibmpowernv_occ_add_device_attrs(pdev); >> + if (err) >> + goto out; >> + >> + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, DRVNAME, >> + NULL, >> + sensor_attrs_groups); >> + >> + err = PTR_ERR_OR_ZERO(hwmon_dev); >> +out: >> + if (err) >> + pr_warn("Failed to initialize Hwmon OCC inband sensors\n"); >> + >> + return err; >> +} >> + >> +static const struct platform_device_id occ_sensor_ids[] = { >> + { .name = "occ-inband-sensor" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(platform, occ_sensor_ids); >> + >> +static const struct of_device_id occ_sensor_of_ids[] = { >> + { .compatible = "ibm,p9-occ-inband-sensor" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, occ_sensor_of_ids); >> + >> +static struct platform_driver ibmpowernv_occ_driver = { >> + .probe = ibmpowernv_occ_probe, >> + .id_table = occ_sensor_ids, >> + .driver = { >> + .name = DRVNAME, >> + .of_match_table = occ_sensor_of_ids, >> + }, >> +}; >> + >> +module_platform_driver(ibmpowernv_occ_driver); >> + >> +MODULE_AUTHOR("Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>"); >> +MODULE_DESCRIPTION("IBM POWERNV platform OCC inband sensors"); >> +MODULE_LICENSE("GPL"); >> -- >> 1.8.3.1 >> > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/09/2017 05:30 AM, Shilpasri G Bhat wrote: > Hi Guenter, > > On 03/09/2017 05:40 PM, Guenter Roeck wrote: >> On Thu, Mar 09, 2017 at 05:19:15PM +0530, Shilpasri G Bhat wrote: >>> Add support to read power and temperature sensors from OCC inband >>> sensors which are copied to main memory by OCC. >>> >> >> Is this supposed to be an alternative to the submission from >> Eddie James ? If so, is there a reason to consider such an >> alternative ? >> > > This is not an alternative submission. Eddie James' hwmon OCC driver is to > export the sensors in BMC which is a service processor for POWER{8,9} servers. > This patch adds a hwmon driver in the POWER9 server. > Both are names ...occ... kind of difficult to understand what is what. Either case, it appears that there are some dependencies to other code which I was not copied on. that is not very helpful. Please use the new hwmon API (devm_hwmon_device_register_with_info); this driver seems to be a perfect candidate. Also, please do not use function macros; those tend to obfuscate the code and make it hard to understand. With the new API, such macros should not be necessary. Couple of additional comments inline. Thanks, Guenter > Thanks and Regards, > Shilpa > >> Thanks, >> Guenter >> >>> Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> >>> CC: Rob Herring <robh+dt@kernel.org> >>> CC: Mark Rutland <mark.rutland@arm.com> >>> CC: Jean Delvare <jdelvare@suse.com> >>> CC: Guenter Roeck <linux@roeck-us.net> >>> CC: Jonathan Corbet <corbet@lwn.net> >>> CC: devicetree@vger.kernel.org >>> CC: linux-hwmon@vger.kernel.orgThat >>> CC: linux-doc@vger.kernel.org >>> --- >>> .../devicetree/bindings/hwmon/ibmpowernv-occ.txt | 4 + >>> Documentation/hwmon/ibmpowernv-occ | 24 ++ >>> drivers/hwmon/Kconfig | 11 + >>> drivers/hwmon/Makefile | 1 + >>> drivers/hwmon/ibmpowernv-occ.c | 302 +++++++++++++++++++++ >>> 5 files changed, 342 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt >>> create mode 100644 Documentation/hwmon/ibmpowernv-occ >>> create mode 100644 drivers/hwmon/ibmpowernv-occ.c >>> >>> diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt >>> new file mode 100644 >>> index 0000000..d03f744 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt >>> @@ -0,0 +1,4 @@ >>> +IBM POWERNV OCC inband platform sensors >>> + >>> +Required device-tree property: >>> +- compatible: "ibm,p9-occ-inband-sensor" >>> diff --git a/Documentation/hwmon/ibmpowernv-occ b/Documentation/hwmon/ibmpowernv-occ >>> new file mode 100644 >>> index 0000000..151028b >>> --- /dev/null >>> +++ b/Documentation/hwmon/ibmpowernv-occ >>> @@ -0,0 +1,24 @@ >>> +Kernel driver ibmpowernv-occ >>> +============================= >>> + >>> +Supported systems: >>> + * P9 server based on POWERNV platform >>> + >>> +Description >>> +------------ >>> + >>> +This driver exports the power and temperature sensors from OCC inband >>> +sensors on P9 POWERNV platforms. >>> + >>> +Sysfs attributes >>> +---------------- >>> + >>> +powerX_input Latest power reading >>> +powerX_input_highest Minimum power >>> +powerX_input_lowest Maximum power >>> +powerX_label Sensor name >>> + >>> +tempX_input Latest temperature reading >>> +tempX_max Minimum temperature >>> +tempX_min Maximum temperature >>> +tempX_label Sensor name >>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig >>> index 0649d53f3..3b1dbb9 100644 >>> --- a/drivers/hwmon/Kconfig >>> +++ b/drivers/hwmon/Kconfig >>> @@ -598,6 +598,17 @@ config SENSORS_IBMPOWERNV >>> This driver can also be built as a module. If so, the module >>> will be called ibmpowernv. >>> >>> +config SENSORS_IBMPOWERNV_OCC >>> + tristate "IBM POWERNV OCC Inband platform sensors" >>> + depends on PPC_POWERNV >>> + default y >>> + help >>> + If you say yes here you get support for the temperature/power >>> + OCC inband sensors on your PowerNV platform. >>> + >>> + This driver can also be built as a module. If so, the module >>> + will be called ibmpowernv-occ. >>> + >>> config SENSORS_IIO_HWMON >>> tristate "Hwmon driver that uses channels specified via iio maps" >>> depends on IIO >>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile >>> index 5509edf..0da2207 100644 >>> --- a/drivers/hwmon/Makefile >>> +++ b/drivers/hwmon/Makefile >>> @@ -75,6 +75,7 @@ obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o >>> obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o >>> obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o >>> obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o >>> +obj-$(CONFIG_SENSORS_IBMPOWERNV_OCC)+= ibmpowernv-occ.o >>> obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o >>> obj-$(CONFIG_SENSORS_INA209) += ina209.o >>> obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o >>> diff --git a/drivers/hwmon/ibmpowernv-occ.c b/drivers/hwmon/ibmpowernv-occ.c >>> new file mode 100644 >>> index 0000000..97b1bbe >>> --- /dev/null >>> +++ b/drivers/hwmon/ibmpowernv-occ.c >>> @@ -0,0 +1,302 @@ >>> +/* >>> + * IBM PowerNV platform OCC inband sensors for temperature/power >>> + * Copyright (C) 2017 IBM >>> + * >>> + * This program is free software; you can redistribute it and/or modify >>> + * it under the terms of the GNU General Public License as published by >>> + * the Free Software Foundation; either version 2 of the License, or >>> + * (at your option) any later version. >>> + * >>> + * This program is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * You should have received a copy of the GNU General Public License >>> + * along with this program. Unnecessary. >>> + */ >>> + >>> +#define DRVNAME "ibmpowernv_occ" >>> +#define pr_fmt(fmt) DRVNAME ": " fmt >>> + >>> +#include <linux/module.h> >>> +#include <linux/hwmon.h> >>> +#include <linux/slab.h> >>> +#include <linux/platform_device.h> alphabetic order please >>> + >>> +#include <asm/opal.h> >>> + >>> +#define MAX_HWMON_ATTR_LEN 32 >>> +#define MAX_HWMON_LABEL_LEN (MAX_OCC_SENSOR_NAME_LEN * 2) >>> +#define HWMON_ATTRS_PER_SENSOR 16 >>> +#define TO_MILLI_UNITS(x) ((x) * 1000) >>> +#define TO_MICRO_UNITS(x) ((x) * 1000000) >>> + >>> +enum sensors { >>> + TEMP, >>> + POWER, >>> + MAX_SENSOR_TYPE, >>> +}; >>> + >>> +static struct sensor_type { >>> + const char *name; >>> + int hwmon_id; >>> +} sensor_types[] = { >>> + { "temp"}, >>> + { "power"}, >>> +}; >>> + >>> +static struct sensor_data { >>> + u32 occ_id; >>> + u64 offset; /* Offset to ping/pong reading buffer */ >>> + enum sensors type; >>> + char label[MAX_HWMON_LABEL_LEN]; >>> + char name[MAX_HWMON_ATTR_LEN]; >>> + struct device_attribute attr; >>> +} *sdata; >>> + >>> +static struct attribute_group sensor_attrs_group; >>> +__ATTRIBUTE_GROUPS(sensor_attrs); >>> + >>> +#define show(file_name) \ >>> +static ssize_t ibmpowernv_occ_show_##file_name \ >>> +(struct device *dev, struct device_attribute *dattr, char *buf) \ >>> +{ \ >>> + struct sensor_data *sdata = container_of(dattr, \ >>> + struct sensor_data, \ >>> + attr); \ >>> + u64 val; \ >>> + int ret; \ this does or should generate a checkpatch warning. >>> + ret = opal_occ_sensor_get_##file_name(sdata->occ_id, \ >>> + sdata->offset, \ >>> + &val); \ >>> + if (ret) \ >>> + return ret; \ >>> + if (sdata->type == TEMP) \ >>> + val = TO_MILLI_UNITS(val); \ >>> + else if (sdata->type == POWER) \ >>> + val = TO_MICRO_UNITS(val); \ >>> + return sprintf(buf, "%llu\n", val); \ >>> +} >>> + >>> +show(sample); >>> +show(max); >>> +show(min); >>> +show(js_min); >>> +show(js_max); >>> +show(csm_min); >>> +show(csm_max); >>> +show(prof_min); >>> +show(prof_max); >>> + >>> +static struct sensor_view_groups { >>> + const char *name; >>> + ssize_t (*show_sample)(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf); >>> + ssize_t (*show_min)(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf); >>> + ssize_t (*show_max)(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf); >>> +} sensor_views[] = { >>> + { >>> + .name = "", >>> + .show_sample = ibmpowernv_occ_show_sample, >>> + .show_min = ibmpowernv_occ_show_min, >>> + .show_max = ibmpowernv_occ_show_max >>> + }, >>> + { >>> + .name = "_JS", >>> + .show_sample = ibmpowernv_occ_show_sample, >>> + .show_min = ibmpowernv_occ_show_js_min, >>> + .show_max = ibmpowernv_occ_show_js_max >>> + }, >>> + { .name = "_CSM", >>> + .show_sample = ibmpowernv_occ_show_sample, >>> + .show_min = ibmpowernv_occ_show_csm_min, >>> + .show_max = ibmpowernv_occ_show_csm_max >>> + }, >>> + { .name = "_Prof", >>> + .show_sample = ibmpowernv_occ_show_sample, >>> + .show_min = ibmpowernv_occ_show_prof_min, >>> + .show_max = ibmpowernv_occ_show_prof_max >>> + }, >>> +}; >>> + >>> +static ssize_t ibmpowernv_occ_show_label(struct device *dev, >>> + struct device_attribute *dattr, >>> + char *buf) >>> +{ >>> + struct sensor_data *sdata = container_of(dattr, struct sensor_data, >>> + attr); >>> + >>> + return sprintf(buf, "%s\n", sdata->label); >>> +} >>> + >>> +static int ibmpowernv_occ_get_sensor_type(enum occ_sensor_type type) >>> +{ >>> + switch (type) { >>> + case OCC_SENSOR_TYPE_POWER: >>> + return POWER; >>> + case OCC_SENSOR_TYPE_TEMPERATURE: >>> + return TEMP; >>> + default: >>> + return MAX_SENSOR_TYPE; >>> + } >>> + >>> + return MAX_SENSOR_TYPE; Never reached. >>> +} >>> + >>> +static void ibmpowernv_occ_add_sdata(struct occ_hwmon_sensor sensor, Passing a data structure (instead of a pointer to it) as parameter is quite unusual. Is this really needed ? I don't really see the point. >>> + struct sensor_data *sdata, char *name, >>> + int hwmon_id, enum sensors type, >>> + ssize_t (*show)(struct device *dev, >>> + struct device_attribute *attr, >>> + char *buf)) >>> +{ >>> + sdata->type = type; >>> + sdata->occ_id = sensor.occ_id; >>> + sdata->offset = sensor.offset; >>> + snprintf(sdata->name, MAX_HWMON_ATTR_LEN, "%s%d_%s", >>> + sensor_types[type].name, hwmon_id, name); >>> + sysfs_attr_init(&sdata->attr.attr); >>> + sdata->attr.attr.name = sdata->name; >>> + sdata->attr.attr.mode = 0444; >>> + sdata->attr.show = show; >>> +} >>> + >>> +static void ibmpowernv_occ_add_sensor_attrs(struct occ_hwmon_sensor sensor, >>> + int index) >>> +{ >>> + struct attribute **attrs = sensor_attrs_group.attrs; >>> + char attr_str[MAX_HWMON_ATTR_LEN]; >>> + enum sensors type = ibmpowernv_occ_get_sensor_type(sensor.type); >>> + int i; >>> + >>> + index *= HWMON_ATTRS_PER_SENSOR; >>> + for (i = 0; i < ARRAY_SIZE(sensor_views); i++) { >>> + int hid = ++sensor_types[type].hwmon_id; >>> + >>> + /* input */ >>> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "input", hid, >>> + type, sensor_views[i].show_sample); >>> + attrs[index] = &sdata[index].attr.attr; >>> + index++; >>> + >>> + /* min */ >>> + if (type == POWER) >>> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", >>> + "input_lowest"); >>> + else >>> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "min"); >>> + >>> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, >>> + type, sensor_views[i].show_min); >>> + attrs[index] = &sdata[index].attr.attr; >>> + index++; >>> + >>> + /* max */ >>> + if (type == POWER) >>> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", >>> + "input_highest"); >>> + else >>> + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "max"); I don't really see the point of those snprintf()s and for having attr_str[] (instead of char *attr_str). >>> + >>> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, >>> + type, sensor_views[i].show_max); >>> + attrs[index] = &sdata[index].attr.attr; >>> + index++; >>> + >>> + /* label */ >>> + snprintf(sdata[index].label, MAX_HWMON_LABEL_LEN, "%s%s", >>> + sensor.name, sensor_views[i].name); >>> + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "label", hid, >>> + type, ibmpowernv_occ_show_label); >>> + attrs[index] = &sdata[index].attr.attr; >>> + index++; >>> + } >>> +} >>> + >>> +static int ibmpowernv_occ_add_device_attrs(struct platform_device *pdev) >>> +{ >>> + struct attribute **attrs; >>> + struct occ_hwmon_sensor *slist = NULL; Unnecessary initialization. >>> + int nr_sensors = 0, i; >>> + int ret = -ENOMEM; >>> + >>> + slist = opal_occ_sensor_get_hwmon_list(&nr_sensors); >>> + if (!nr_sensors) >>> + return -ENODEV; >>> + >>> + if (!slist) >>> + return ret; >>> + is nr_sensors guaranteed to be valid if slist is NULL ? >>> + sdata = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*sdata) * >>> + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); >>> + if (!sdata) >>> + goto out; >>> + >>> + attrs = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*attrs) * >>> + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); >>> + if (!attrs) >>> + goto out; >>> + >>> + sensor_attrs_group.attrs = attrs; >>> + for (i = 0; i < nr_sensors; i++) >>> + ibmpowernv_occ_add_sensor_attrs(slist[i], i); >>> + >>> + ret = 0; >>> +out: >>> + kfree(slist); >>> + return ret; >>> +} >>> + >>> +static int ibmpowernv_occ_probe(struct platform_device *pdev) >>> +{ >>> + struct device *hwmon_dev; >>> + int err; >>> + >>> + err = ibmpowernv_occ_add_device_attrs(pdev); >>> + if (err) >>> + goto out; >>> + For -ENODEV and -ENOMEM you don't really want/need an error message. >>> + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, DRVNAME, >>> + NULL, >>> + sensor_attrs_groups); >>> + >>> + err = PTR_ERR_OR_ZERO(hwmon_dev); >>> +out: >>> + if (err) >>> + pr_warn("Failed to initialize Hwmon OCC inband sensors\n"); dev_warn() if this is really neceessary. I would suggest a more specific error message, though. This doesn't tell if ibmpowernv_occ_add_device_attrs() or devm_hwmon_device_register_with_groups() failed. >>> + >>> + return err; >>> +} >>> + >>> +static const struct platform_device_id occ_sensor_ids[] = { >>> + { .name = "occ-inband-sensor" }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(platform, occ_sensor_ids); >>> + >>> +static const struct of_device_id occ_sensor_of_ids[] = { >>> + { .compatible = "ibm,p9-occ-inband-sensor" }, >>> + { } >>> +}; >>> +MODULE_DEVICE_TABLE(of, occ_sensor_of_ids); >>> + >>> +static struct platform_driver ibmpowernv_occ_driver = { >>> + .probe = ibmpowernv_occ_probe, >>> + .id_table = occ_sensor_ids, >>> + .driver = { >>> + .name = DRVNAME, >>> + .of_match_table = occ_sensor_of_ids, >>> + }, >>> +}; >>> + >>> +module_platform_driver(ibmpowernv_occ_driver); >>> + >>> +MODULE_AUTHOR("Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>"); >>> +MODULE_DESCRIPTION("IBM POWERNV platform OCC inband sensors"); >>> +MODULE_LICENSE("GPL"); >>> -- >>> 1.8.3.1 >>> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt new file mode 100644 index 0000000..d03f744 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt @@ -0,0 +1,4 @@ +IBM POWERNV OCC inband platform sensors + +Required device-tree property: +- compatible: "ibm,p9-occ-inband-sensor" diff --git a/Documentation/hwmon/ibmpowernv-occ b/Documentation/hwmon/ibmpowernv-occ new file mode 100644 index 0000000..151028b --- /dev/null +++ b/Documentation/hwmon/ibmpowernv-occ @@ -0,0 +1,24 @@ +Kernel driver ibmpowernv-occ +============================= + +Supported systems: + * P9 server based on POWERNV platform + +Description +------------ + +This driver exports the power and temperature sensors from OCC inband +sensors on P9 POWERNV platforms. + +Sysfs attributes +---------------- + +powerX_input Latest power reading +powerX_input_highest Minimum power +powerX_input_lowest Maximum power +powerX_label Sensor name + +tempX_input Latest temperature reading +tempX_max Minimum temperature +tempX_min Maximum temperature +tempX_label Sensor name diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0649d53f3..3b1dbb9 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -598,6 +598,17 @@ config SENSORS_IBMPOWERNV This driver can also be built as a module. If so, the module will be called ibmpowernv. +config SENSORS_IBMPOWERNV_OCC + tristate "IBM POWERNV OCC Inband platform sensors" + depends on PPC_POWERNV + default y + help + If you say yes here you get support for the temperature/power + OCC inband sensors on your PowerNV platform. + + This driver can also be built as a module. If so, the module + will be called ibmpowernv-occ. + config SENSORS_IIO_HWMON tristate "Hwmon driver that uses channels specified via iio maps" depends on IIO diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 5509edf..0da2207 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o +obj-$(CONFIG_SENSORS_IBMPOWERNV_OCC)+= ibmpowernv-occ.o obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o obj-$(CONFIG_SENSORS_INA209) += ina209.o obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o diff --git a/drivers/hwmon/ibmpowernv-occ.c b/drivers/hwmon/ibmpowernv-occ.c new file mode 100644 index 0000000..97b1bbe --- /dev/null +++ b/drivers/hwmon/ibmpowernv-occ.c @@ -0,0 +1,302 @@ +/* + * IBM PowerNV platform OCC inband sensors for temperature/power + * Copyright (C) 2017 IBM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + */ + +#define DRVNAME "ibmpowernv_occ" +#define pr_fmt(fmt) DRVNAME ": " fmt + +#include <linux/module.h> +#include <linux/hwmon.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <asm/opal.h> + +#define MAX_HWMON_ATTR_LEN 32 +#define MAX_HWMON_LABEL_LEN (MAX_OCC_SENSOR_NAME_LEN * 2) +#define HWMON_ATTRS_PER_SENSOR 16 +#define TO_MILLI_UNITS(x) ((x) * 1000) +#define TO_MICRO_UNITS(x) ((x) * 1000000) + +enum sensors { + TEMP, + POWER, + MAX_SENSOR_TYPE, +}; + +static struct sensor_type { + const char *name; + int hwmon_id; +} sensor_types[] = { + { "temp"}, + { "power"}, +}; + +static struct sensor_data { + u32 occ_id; + u64 offset; /* Offset to ping/pong reading buffer */ + enum sensors type; + char label[MAX_HWMON_LABEL_LEN]; + char name[MAX_HWMON_ATTR_LEN]; + struct device_attribute attr; +} *sdata; + +static struct attribute_group sensor_attrs_group; +__ATTRIBUTE_GROUPS(sensor_attrs); + +#define show(file_name) \ +static ssize_t ibmpowernv_occ_show_##file_name \ +(struct device *dev, struct device_attribute *dattr, char *buf) \ +{ \ + struct sensor_data *sdata = container_of(dattr, \ + struct sensor_data, \ + attr); \ + u64 val; \ + int ret; \ + ret = opal_occ_sensor_get_##file_name(sdata->occ_id, \ + sdata->offset, \ + &val); \ + if (ret) \ + return ret; \ + if (sdata->type == TEMP) \ + val = TO_MILLI_UNITS(val); \ + else if (sdata->type == POWER) \ + val = TO_MICRO_UNITS(val); \ + return sprintf(buf, "%llu\n", val); \ +} + +show(sample); +show(max); +show(min); +show(js_min); +show(js_max); +show(csm_min); +show(csm_max); +show(prof_min); +show(prof_max); + +static struct sensor_view_groups { + const char *name; + ssize_t (*show_sample)(struct device *dev, + struct device_attribute *attr, + char *buf); + ssize_t (*show_min)(struct device *dev, + struct device_attribute *attr, + char *buf); + ssize_t (*show_max)(struct device *dev, + struct device_attribute *attr, + char *buf); +} sensor_views[] = { + { + .name = "", + .show_sample = ibmpowernv_occ_show_sample, + .show_min = ibmpowernv_occ_show_min, + .show_max = ibmpowernv_occ_show_max + }, + { + .name = "_JS", + .show_sample = ibmpowernv_occ_show_sample, + .show_min = ibmpowernv_occ_show_js_min, + .show_max = ibmpowernv_occ_show_js_max + }, + { .name = "_CSM", + .show_sample = ibmpowernv_occ_show_sample, + .show_min = ibmpowernv_occ_show_csm_min, + .show_max = ibmpowernv_occ_show_csm_max + }, + { .name = "_Prof", + .show_sample = ibmpowernv_occ_show_sample, + .show_min = ibmpowernv_occ_show_prof_min, + .show_max = ibmpowernv_occ_show_prof_max + }, +}; + +static ssize_t ibmpowernv_occ_show_label(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct sensor_data *sdata = container_of(dattr, struct sensor_data, + attr); + + return sprintf(buf, "%s\n", sdata->label); +} + +static int ibmpowernv_occ_get_sensor_type(enum occ_sensor_type type) +{ + switch (type) { + case OCC_SENSOR_TYPE_POWER: + return POWER; + case OCC_SENSOR_TYPE_TEMPERATURE: + return TEMP; + default: + return MAX_SENSOR_TYPE; + } + + return MAX_SENSOR_TYPE; +} + +static void ibmpowernv_occ_add_sdata(struct occ_hwmon_sensor sensor, + struct sensor_data *sdata, char *name, + int hwmon_id, enum sensors type, + ssize_t (*show)(struct device *dev, + struct device_attribute *attr, + char *buf)) +{ + sdata->type = type; + sdata->occ_id = sensor.occ_id; + sdata->offset = sensor.offset; + snprintf(sdata->name, MAX_HWMON_ATTR_LEN, "%s%d_%s", + sensor_types[type].name, hwmon_id, name); + sysfs_attr_init(&sdata->attr.attr); + sdata->attr.attr.name = sdata->name; + sdata->attr.attr.mode = 0444; + sdata->attr.show = show; +} + +static void ibmpowernv_occ_add_sensor_attrs(struct occ_hwmon_sensor sensor, + int index) +{ + struct attribute **attrs = sensor_attrs_group.attrs; + char attr_str[MAX_HWMON_ATTR_LEN]; + enum sensors type = ibmpowernv_occ_get_sensor_type(sensor.type); + int i; + + index *= HWMON_ATTRS_PER_SENSOR; + for (i = 0; i < ARRAY_SIZE(sensor_views); i++) { + int hid = ++sensor_types[type].hwmon_id; + + /* input */ + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "input", hid, + type, sensor_views[i].show_sample); + attrs[index] = &sdata[index].attr.attr; + index++; + + /* min */ + if (type == POWER) + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", + "input_lowest"); + else + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "min"); + + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, + type, sensor_views[i].show_min); + attrs[index] = &sdata[index].attr.attr; + index++; + + /* max */ + if (type == POWER) + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", + "input_highest"); + else + snprintf(attr_str, MAX_HWMON_ATTR_LEN, "%s", "max"); + + ibmpowernv_occ_add_sdata(sensor, &sdata[index], attr_str, hid, + type, sensor_views[i].show_max); + attrs[index] = &sdata[index].attr.attr; + index++; + + /* label */ + snprintf(sdata[index].label, MAX_HWMON_LABEL_LEN, "%s%s", + sensor.name, sensor_views[i].name); + ibmpowernv_occ_add_sdata(sensor, &sdata[index], "label", hid, + type, ibmpowernv_occ_show_label); + attrs[index] = &sdata[index].attr.attr; + index++; + } +} + +static int ibmpowernv_occ_add_device_attrs(struct platform_device *pdev) +{ + struct attribute **attrs; + struct occ_hwmon_sensor *slist = NULL; + int nr_sensors = 0, i; + int ret = -ENOMEM; + + slist = opal_occ_sensor_get_hwmon_list(&nr_sensors); + if (!nr_sensors) + return -ENODEV; + + if (!slist) + return ret; + + sdata = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*sdata) * + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); + if (!sdata) + goto out; + + attrs = devm_kzalloc(&pdev->dev, nr_sensors * sizeof(*attrs) * + HWMON_ATTRS_PER_SENSOR, GFP_KERNEL); + if (!attrs) + goto out; + + sensor_attrs_group.attrs = attrs; + for (i = 0; i < nr_sensors; i++) + ibmpowernv_occ_add_sensor_attrs(slist[i], i); + + ret = 0; +out: + kfree(slist); + return ret; +} + +static int ibmpowernv_occ_probe(struct platform_device *pdev) +{ + struct device *hwmon_dev; + int err; + + err = ibmpowernv_occ_add_device_attrs(pdev); + if (err) + goto out; + + hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, DRVNAME, + NULL, + sensor_attrs_groups); + + err = PTR_ERR_OR_ZERO(hwmon_dev); +out: + if (err) + pr_warn("Failed to initialize Hwmon OCC inband sensors\n"); + + return err; +} + +static const struct platform_device_id occ_sensor_ids[] = { + { .name = "occ-inband-sensor" }, + { } +}; +MODULE_DEVICE_TABLE(platform, occ_sensor_ids); + +static const struct of_device_id occ_sensor_of_ids[] = { + { .compatible = "ibm,p9-occ-inband-sensor" }, + { } +}; +MODULE_DEVICE_TABLE(of, occ_sensor_of_ids); + +static struct platform_driver ibmpowernv_occ_driver = { + .probe = ibmpowernv_occ_probe, + .id_table = occ_sensor_ids, + .driver = { + .name = DRVNAME, + .of_match_table = occ_sensor_of_ids, + }, +}; + +module_platform_driver(ibmpowernv_occ_driver); + +MODULE_AUTHOR("Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>"); +MODULE_DESCRIPTION("IBM POWERNV platform OCC inband sensors"); +MODULE_LICENSE("GPL");
Add support to read power and temperature sensors from OCC inband sensors which are copied to main memory by OCC. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: Jean Delvare <jdelvare@suse.com> CC: Guenter Roeck <linux@roeck-us.net> CC: Jonathan Corbet <corbet@lwn.net> CC: devicetree@vger.kernel.org CC: linux-hwmon@vger.kernel.org CC: linux-doc@vger.kernel.org --- .../devicetree/bindings/hwmon/ibmpowernv-occ.txt | 4 + Documentation/hwmon/ibmpowernv-occ | 24 ++ drivers/hwmon/Kconfig | 11 + drivers/hwmon/Makefile | 1 + drivers/hwmon/ibmpowernv-occ.c | 302 +++++++++++++++++++++ 5 files changed, 342 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ibmpowernv-occ.txt create mode 100644 Documentation/hwmon/ibmpowernv-occ create mode 100644 drivers/hwmon/ibmpowernv-occ.c