hwmon (pmbus): cffps: Add PMBUS_SKIP_STATUS_CHECK

Commit Message

Eddie James Jan. 8, 2018, 9:10 p.m. UTC

This power supply device regularly fails to read VOUT_MODE due to the
CML bit going high. This results in an incorrect exponent used for the
voltage data, and therefore the power supply reports incorrect voltage.
Work around this by setting the pmbus flag to skip the CML check.

Signed-off-by: Eddie James <[e-mail]>
---
 drivers/hwmon/pmbus/ibm-cffps.c | 6 ++++++
 1 file changed, 6 insertions(+)

Patch

diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index de254747..2d6f4f4 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -15,6 +15,7 @@ 
 #include <linux/jiffies.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/pmbus.h>
 
 #include "pmbus.h"
 
@@ -268,6 +269,10 @@  static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 	.read_word_data = ibm_cffps_read_word_data,
 };
 
+static struct pmbus_platform_data ibm_cffps_pdata = {
+	.flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
 static int ibm_cffps_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
@@ -276,6 +281,7 @@  static int ibm_cffps_probe(struct i2c_client *client,
 	struct dentry *ibm_cffps_dir;
 	struct ibm_cffps *psu;
 
+	client->dev.platform_data = &ibm_cffps_pdata;
 	rc = pmbus_do_probe(client, id, &ibm_cffps_info);
 	if (rc)
 		return rc;