diff mbox

[v7,2/2] hwmon: (ucd9000) Add debugfs attributes to provide mfr_status

Message ID 1521235326-24310-3-git-send-email-eajames@linux.vnet.ibm.com (mailing list archive)
State Accepted
Headers show

Commit Message

Eddie James March 16, 2018, 9:22 p.m. UTC
From: Christopher Bostic <cbostic@linux.vnet.ibm.com>

Expose the gpiN_fault fields of mfr_status as individual debugfs
attributes. This provides a way for users to be easily notified of gpi
faults. Also provide the whole mfr_status register in debugfs.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
---
 drivers/hwmon/pmbus/ucd9000.c | 138 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 137 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index ef2c5bf..70cecb0 100644
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -19,6 +19,7 @@ 
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -37,6 +38,7 @@ 
 #define UCD9000_NUM_PAGES		0xd6
 #define UCD9000_FAN_CONFIG_INDEX	0xe7
 #define UCD9000_FAN_CONFIG		0xe8
+#define UCD9000_MFR_STATUS		0xf3
 #define UCD9000_GPIO_SELECT		0xfa
 #define UCD9000_GPIO_CONFIG		0xfb
 #define UCD9000_DEVICE_ID		0xfd
@@ -64,15 +66,24 @@ 
 #define UCD901XX_NUM_GPIOS	26
 #define UCD90910_NUM_GPIOS	26
 
+#define UCD9000_DEBUGFS_NAME_LEN	24
+#define UCD9000_GPI_COUNT		8
+
 struct ucd9000_data {
 	u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
 	struct pmbus_driver_info info;
 #ifdef CONFIG_GPIOLIB
 	struct gpio_chip gpio;
 #endif
+	struct dentry *debugfs;
 };
 #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
 
+struct ucd9000_debugfs_entry {
+	struct i2c_client *client;
+	u8 index;
+};
+
 static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
 {
 	int fan_config = 0;
@@ -359,6 +370,122 @@  static void ucd9000_probe_gpio(struct i2c_client *client,
 }
 #endif /* CONFIG_GPIOLIB */
 
+#ifdef CONFIG_DEBUG_FS
+static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer)
+{
+	int ret = pmbus_set_page(client, 0);
+
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer);
+}
+
+static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
+{
+	struct ucd9000_debugfs_entry *entry = data;
+	struct i2c_client *client = entry->client;
+	u8 buffer[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	ret = ucd9000_get_mfr_status(client, buffer);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Attribute only created for devices with gpi fault bits at bits
+	 * 16-23, which is the second byte of the response.
+	 */
+	*val = !!(buffer[1] & BIT(entry->index));
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit,
+			 ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n");
+
+static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file,
+					       char __user *buf, size_t count,
+					       loff_t *ppos)
+{
+	struct i2c_client *client = file->private_data;
+	u8 buffer[I2C_SMBUS_BLOCK_MAX];
+	char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2];
+	char *res;
+	int rc;
+
+	rc = ucd9000_get_mfr_status(client, buffer);
+	if (rc < 0)
+		return rc;
+
+	res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX));
+	*res++ = '\n';
+	*res = 0;
+
+	return simple_read_from_buffer(buf, count, ppos, str, res - str);
+}
+
+static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = {
+	.llseek = noop_llseek,
+	.read = ucd9000_debugfs_read_mfr_status,
+	.open = simple_open,
+};
+
+static int ucd9000_init_debugfs(struct i2c_client *client,
+				const struct i2c_device_id *mid,
+				struct ucd9000_data *data)
+{
+	struct dentry *debugfs;
+	struct ucd9000_debugfs_entry *entries;
+	int i;
+	char name[UCD9000_DEBUGFS_NAME_LEN];
+
+	debugfs = pmbus_get_debugfs_dir(client);
+	if (!debugfs)
+		return -ENOENT;
+
+	data->debugfs = debugfs_create_dir(client->name, debugfs);
+	if (!data->debugfs)
+		return -ENOENT;
+
+	/*
+	 * Of the chips this driver supports, only the UCD9090, UCD90160,
+	 * and UCD90910 report GPI faults in their MFR_STATUS register, so only
+	 * create the GPI fault debugfs attributes for those chips.
+	 */
+	if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
+	    mid->driver_data == ucd90910) {
+		entries = devm_kzalloc(&client->dev,
+				       sizeof(*entries) * UCD9000_GPI_COUNT,
+				       GFP_KERNEL);
+		if (!entries)
+			return -ENOMEM;
+
+		for (i = 0; i < UCD9000_GPI_COUNT; i++) {
+			entries[i].client = client;
+			entries[i].index = i;
+			scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
+				  "gpi%d_alarm", i + 1);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[i],
+					    &ucd9000_debugfs_mfr_status_bit);
+		}
+	}
+
+	scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status");
+	debugfs_create_file(name, 0444, data->debugfs, client,
+			    &ucd9000_debugfs_show_mfr_status_fops);
+
+	return 0;
+}
+#else
+static int ucd9000_init_debugfs(struct i2c_client *client,
+				const struct i2c_device_id *mid,
+				struct ucd9000_data *data)
+{
+	return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
+
 static int ucd9000_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -475,7 +602,16 @@  static int ucd9000_probe(struct i2c_client *client,
 
 	ucd9000_probe_gpio(client, mid, data);
 
-	return pmbus_do_probe(client, mid, info);
+	ret = pmbus_do_probe(client, mid, info);
+	if (ret)
+		return ret;
+
+	ret = ucd9000_init_debugfs(client, mid, data);
+	if (ret)
+		dev_warn(&client->dev, "Failed to register debugfs: %d\n",
+			 ret);
+
+	return 0;
 }
 
 /* This is the driver that will be inserted */