Message ID | 1525014504-14742-1-git-send-email-linux@roeck-us.net (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
2018-04-29 17:08 GMT+02:00 Guenter Roeck <linux@roeck-us.net>: > The HTC (Hardware Temperature Control) register has moved > for recent chips. > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > --- > v2: Actually call the new function pointer from show_temp_crit(). > > drivers/hwmon/k10temp.c | 40 ++++++++++++++++++++++++++++++---------- > 1 file changed, 30 insertions(+), 10 deletions(-) > > diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c > index d2cc55e21374..34b5448b00be 100644 > --- a/drivers/hwmon/k10temp.c > +++ b/drivers/hwmon/k10temp.c > @@ -63,10 +63,12 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); > #define NB_CAP_HTC 0x00000400 > > /* > - * For F15h M60h, functionality of REG_REPORTED_TEMPERATURE > - * has been moved to D0F0xBC_xD820_0CA4 [Reported Temperature > - * Control] > + * For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL > + * and REG_REPORTED_TEMPERATURE have been moved to > + * D0F0xBC_xD820_0C64 [Hardware Temperature Control] > + * D0F0xBC_xD820_0CA4 [Reported Temperature Control] > */ > +#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64 > #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4 > > /* F17h M01h Access througn SMN */ > @@ -74,6 +76,7 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); > > struct k10temp_data { > struct pci_dev *pdev; > + void (*read_htcreg)(struct pci_dev *pdev, u32 *regval); > void (*read_tempreg)(struct pci_dev *pdev, u32 *regval); > int temp_offset; > u32 temp_adjust_mask; > @@ -98,6 +101,11 @@ static const struct tctl_offset tctl_offset_table[] = { > { 0x17, "AMD Ryzen Threadripper 1910", 10000 }, > }; > > +static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval) > +{ > + pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval); > +} > + > static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval) > { > pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval); > @@ -114,6 +122,12 @@ static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn, > mutex_unlock(&nb_smu_ind_mutex); > } > > +static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval) > +{ > + amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, > + F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval); > +} > + > static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval) > { > amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, > @@ -160,8 +174,7 @@ static ssize_t show_temp_crit(struct device *dev, > u32 regval; > int value; > > - pci_read_config_dword(data->pdev, > - REG_HARDWARE_THERMAL_CONTROL, ®val); > + data->read_htcreg(data->pdev, ®val); > value = ((regval >> 16) & 0x7f) * 500 + 52000; > if (show_hyst) > value -= ((regval >> 24) & 0xf) * 500; > @@ -181,13 +194,18 @@ static umode_t k10temp_is_visible(struct kobject *kobj, > struct pci_dev *pdev = data->pdev; > > if (index >= 2) { > - u32 reg_caps, reg_htc; > + u32 reg; > + > + if (!data->read_htcreg) > + return 0; > > pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, > - ®_caps); > - pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, > - ®_htc); > - if (!(reg_caps & NB_CAP_HTC) || !(reg_htc & HTC_ENABLE)) > + ®); > + if (!(reg & NB_CAP_HTC)) > + return 0; > + > + data->read_htcreg(data->pdev, ®); > + if (!(reg & HTC_ENABLE)) > return 0; > } > return attr->mode; > @@ -268,11 +286,13 @@ static int k10temp_probe(struct pci_dev *pdev, > > if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 || > boot_cpu_data.x86_model == 0x70)) { > + data->read_htcreg = read_htcreg_nb_f15; > data->read_tempreg = read_tempreg_nb_f15; > } else if (boot_cpu_data.x86 == 0x17) { > data->temp_adjust_mask = 0x80000; > data->read_tempreg = read_tempreg_nb_f17; > } else { > + data->read_htcreg = read_htcreg_pci; > data->read_tempreg = read_tempreg_pci; > } > > -- > 2.7.4 > Tested on 4.17.0-rc2-00398-gcdface520934 , works fine for me. Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> Regards -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 04/29/2018 09:03 AM, Gabriel C wrote: > 2018-04-29 17:08 GMT+02:00 Guenter Roeck <linux@roeck-us.net>: >> The HTC (Hardware Temperature Control) register has moved >> for recent chips. >> >> Signed-off-by: Guenter Roeck <linux@roeck-us.net> >> --- >> v2: Actually call the new function pointer from show_temp_crit(). >> >> drivers/hwmon/k10temp.c | 40 ++++++++++++++++++++++++++++++---------- >> 1 file changed, 30 insertions(+), 10 deletions(-) >> >> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c >> index d2cc55e21374..34b5448b00be 100644 >> --- a/drivers/hwmon/k10temp.c >> +++ b/drivers/hwmon/k10temp.c >> @@ -63,10 +63,12 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); >> #define NB_CAP_HTC 0x00000400 >> >> /* >> - * For F15h M60h, functionality of REG_REPORTED_TEMPERATURE >> - * has been moved to D0F0xBC_xD820_0CA4 [Reported Temperature >> - * Control] >> + * For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL >> + * and REG_REPORTED_TEMPERATURE have been moved to >> + * D0F0xBC_xD820_0C64 [Hardware Temperature Control] >> + * D0F0xBC_xD820_0CA4 [Reported Temperature Control] >> */ >> +#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64 >> #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4 >> >> /* F17h M01h Access througn SMN */ >> @@ -74,6 +76,7 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); >> >> struct k10temp_data { >> struct pci_dev *pdev; >> + void (*read_htcreg)(struct pci_dev *pdev, u32 *regval); >> void (*read_tempreg)(struct pci_dev *pdev, u32 *regval); >> int temp_offset; >> u32 temp_adjust_mask; >> @@ -98,6 +101,11 @@ static const struct tctl_offset tctl_offset_table[] = { >> { 0x17, "AMD Ryzen Threadripper 1910", 10000 }, >> }; >> >> +static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval) >> +{ >> + pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval); >> +} >> + >> static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval) >> { >> pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval); >> @@ -114,6 +122,12 @@ static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn, >> mutex_unlock(&nb_smu_ind_mutex); >> } >> >> +static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval) >> +{ >> + amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, >> + F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval); >> +} >> + >> static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval) >> { >> amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, >> @@ -160,8 +174,7 @@ static ssize_t show_temp_crit(struct device *dev, >> u32 regval; >> int value; >> >> - pci_read_config_dword(data->pdev, >> - REG_HARDWARE_THERMAL_CONTROL, ®val); >> + data->read_htcreg(data->pdev, ®val); >> value = ((regval >> 16) & 0x7f) * 500 + 52000; >> if (show_hyst) >> value -= ((regval >> 24) & 0xf) * 500; >> @@ -181,13 +194,18 @@ static umode_t k10temp_is_visible(struct kobject *kobj, >> struct pci_dev *pdev = data->pdev; >> >> if (index >= 2) { >> - u32 reg_caps, reg_htc; >> + u32 reg; >> + >> + if (!data->read_htcreg) >> + return 0; >> >> pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, >> - ®_caps); >> - pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, >> - ®_htc); >> - if (!(reg_caps & NB_CAP_HTC) || !(reg_htc & HTC_ENABLE)) >> + ®); >> + if (!(reg & NB_CAP_HTC)) >> + return 0; >> + >> + data->read_htcreg(data->pdev, ®); >> + if (!(reg & HTC_ENABLE)) >> return 0; >> } >> return attr->mode; >> @@ -268,11 +286,13 @@ static int k10temp_probe(struct pci_dev *pdev, >> >> if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 || >> boot_cpu_data.x86_model == 0x70)) { >> + data->read_htcreg = read_htcreg_nb_f15; >> data->read_tempreg = read_tempreg_nb_f15; >> } else if (boot_cpu_data.x86 == 0x17) { >> data->temp_adjust_mask = 0x80000; >> data->read_tempreg = read_tempreg_nb_f17; >> } else { >> + data->read_htcreg = read_htcreg_pci; >> data->read_tempreg = read_tempreg_pci; >> } >> >> -- >> 2.7.4 >> > > Tested on 4.17.0-rc2-00398-gcdface520934 , works fine for me. > > Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com> > Thanks a lot! Guenter -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index d2cc55e21374..34b5448b00be 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -63,10 +63,12 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); #define NB_CAP_HTC 0x00000400 /* - * For F15h M60h, functionality of REG_REPORTED_TEMPERATURE - * has been moved to D0F0xBC_xD820_0CA4 [Reported Temperature - * Control] + * For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL + * and REG_REPORTED_TEMPERATURE have been moved to + * D0F0xBC_xD820_0C64 [Hardware Temperature Control] + * D0F0xBC_xD820_0CA4 [Reported Temperature Control] */ +#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64 #define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4 /* F17h M01h Access througn SMN */ @@ -74,6 +76,7 @@ static DEFINE_MUTEX(nb_smu_ind_mutex); struct k10temp_data { struct pci_dev *pdev; + void (*read_htcreg)(struct pci_dev *pdev, u32 *regval); void (*read_tempreg)(struct pci_dev *pdev, u32 *regval); int temp_offset; u32 temp_adjust_mask; @@ -98,6 +101,11 @@ static const struct tctl_offset tctl_offset_table[] = { { 0x17, "AMD Ryzen Threadripper 1910", 10000 }, }; +static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval) +{ + pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval); +} + static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval) { pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval); @@ -114,6 +122,12 @@ static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn, mutex_unlock(&nb_smu_ind_mutex); } +static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval) +{ + amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, + F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval); +} + static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval) { amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8, @@ -160,8 +174,7 @@ static ssize_t show_temp_crit(struct device *dev, u32 regval; int value; - pci_read_config_dword(data->pdev, - REG_HARDWARE_THERMAL_CONTROL, ®val); + data->read_htcreg(data->pdev, ®val); value = ((regval >> 16) & 0x7f) * 500 + 52000; if (show_hyst) value -= ((regval >> 24) & 0xf) * 500; @@ -181,13 +194,18 @@ static umode_t k10temp_is_visible(struct kobject *kobj, struct pci_dev *pdev = data->pdev; if (index >= 2) { - u32 reg_caps, reg_htc; + u32 reg; + + if (!data->read_htcreg) + return 0; pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, - ®_caps); - pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, - ®_htc); - if (!(reg_caps & NB_CAP_HTC) || !(reg_htc & HTC_ENABLE)) + ®); + if (!(reg & NB_CAP_HTC)) + return 0; + + data->read_htcreg(data->pdev, ®); + if (!(reg & HTC_ENABLE)) return 0; } return attr->mode; @@ -268,11 +286,13 @@ static int k10temp_probe(struct pci_dev *pdev, if (boot_cpu_data.x86 == 0x15 && (boot_cpu_data.x86_model == 0x60 || boot_cpu_data.x86_model == 0x70)) { + data->read_htcreg = read_htcreg_nb_f15; data->read_tempreg = read_tempreg_nb_f15; } else if (boot_cpu_data.x86 == 0x17) { data->temp_adjust_mask = 0x80000; data->read_tempreg = read_tempreg_nb_f17; } else { + data->read_htcreg = read_htcreg_pci; data->read_tempreg = read_tempreg_pci; }
The HTC (Hardware Temperature Control) register has moved for recent chips. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- v2: Actually call the new function pointer from show_temp_crit(). drivers/hwmon/k10temp.c | 40 ++++++++++++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 10 deletions(-)