@@ -204,6 +204,7 @@
#define OPAL_NPU_SPA_SETUP 159
#define OPAL_NPU_SPA_CLEAR_CACHE 160
#define OPAL_NPU_TL_SET 161
+#define OPAL_SENSOR_READ_U64 162
#define OPAL_PCI_GET_PBCQ_TUNNEL_BAR 164
#define OPAL_PCI_SET_PBCQ_TUNNEL_BAR 165
#define OPAL_LAST 165
@@ -201,6 +201,7 @@ int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
uint64_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
+int64_t opal_sensor_read_u64(u32 sensor_hndl, int token, __be64 *sensor_data);
int64_t opal_handle_hmi(void);
int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
int64_t opal_unregister_dump_region(uint32_t id);
@@ -323,6 +324,7 @@ extern int opal_message_notifier_unregister(enum opal_msg_type msg_type,
extern int opal_async_wait_response_interruptible(uint64_t token,
struct opal_msg *msg);
extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data);
+extern int opal_get_sensor_data_u64(u32 sensor_hndl, u64 *sensor_data);
struct rtc_time;
extern unsigned long opal_get_boot_time(void);
@@ -72,6 +72,59 @@ int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data)
}
EXPORT_SYMBOL_GPL(opal_get_sensor_data);
+int opal_get_sensor_data_u64(u32 sensor_hndl, u64 *sensor_data)
+{
+ int ret, token;
+ struct opal_msg msg;
+ __be64 data;
+
+ if (!opal_check_token(OPAL_SENSOR_READ_U64)) {
+ u32 sdata;
+
+ ret = opal_get_sensor_data(sensor_hndl, &sdata);
+ if (!ret)
+ *sensor_data = sdata;
+ return ret;
+ }
+
+ token = opal_async_get_token_interruptible();
+ if (token < 0)
+ return token;
+
+ ret = opal_sensor_read_u64(sensor_hndl, token, &data);
+ switch (ret) {
+ case OPAL_ASYNC_COMPLETION:
+ ret = opal_async_wait_response(token, &msg);
+ if (ret) {
+ pr_err("%s: Failed to wait for the async response, %d\n",
+ __func__, ret);
+ goto out_token;
+ }
+
+ ret = opal_error_code(opal_get_async_rc(msg));
+ *sensor_data = be64_to_cpu(data);
+ break;
+
+ case OPAL_SUCCESS:
+ ret = 0;
+ *sensor_data = be64_to_cpu(data);
+ break;
+
+ case OPAL_WRONG_STATE:
+ ret = -EIO;
+ break;
+
+ default:
+ ret = opal_error_code(ret);
+ break;
+ }
+
+out_token:
+ opal_async_release_token(token);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(opal_get_sensor_data_u64);
+
int __init opal_sensor_init(void)
{
struct platform_device *pdev;
@@ -325,3 +325,4 @@ OPAL_CALL(opal_npu_spa_clear_cache, OPAL_NPU_SPA_CLEAR_CACHE);
OPAL_CALL(opal_npu_tl_set, OPAL_NPU_TL_SET);
OPAL_CALL(opal_pci_get_pbcq_tunnel_bar, OPAL_PCI_GET_PBCQ_TUNNEL_BAR);
OPAL_CALL(opal_pci_set_pbcq_tunnel_bar, OPAL_PCI_SET_PBCQ_TUNNEL_BAR);
+OPAL_CALL(opal_sensor_read_u64, OPAL_SENSOR_READ_U64);
This patch adds support to read 64-bit sensor values. This method is used to read energy sensors and counters which are of type u64. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> --- arch/powerpc/include/asm/opal-api.h | 1 + arch/powerpc/include/asm/opal.h | 2 + arch/powerpc/platforms/powernv/opal-sensor.c | 53 ++++++++++++++++++++++++++ arch/powerpc/platforms/powernv/opal-wrappers.S | 1 + 4 files changed, 57 insertions(+)