| Message ID | 1530878166-12589-4-git-send-email-shilpa.bhat@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On 07/06/2018 04:56 AM, Shilpasri G Bhat wrote: > Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Applied to hwmon-next, after updating the commit description. I also removed the text "This attribute can be used as per-sensor or per-sub-group attribute depending on what is supported by the hardware." from the attribute descriptions; this is an implementation detail which should be described in driver documentations. Thanks, Guenter > --- > Documentation/hwmon/sysfs-interface | 62 +++++++++++++++++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > > diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface > index fc337c3..f865dd7 100644 > --- a/Documentation/hwmon/sysfs-interface > +++ b/Documentation/hwmon/sysfs-interface > @@ -171,6 +171,15 @@ in[0-*]_label Suggested voltage channel label. > user-space. > RO > > +in[0-*]_enable > + Enable or disable the sensors. > + When disabled the sensor read will return -ENODATA. This > + attribute can be used as per-sensor or per-sub-group attribute > + depending on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > + > cpu[0-*]_vid CPU core reference voltage. > Unit: millivolt > RO > @@ -236,6 +245,15 @@ fan[1-*]_label Suggested fan channel label. > In all other cases, the label is provided by user-space. > RO > > +fan[1-*]_enable > + Enable or disable the sensors. > + When disabled the sensor read will return -ENODATA. This > + attribute can be used as per-sensor or per-sub-group attribute > + depending on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > + > Also see the Alarms section for status flags associated with fans. > > > @@ -409,6 +427,15 @@ temp_reset_history > Reset temp_lowest and temp_highest for all sensors > WO > > +temp[1-*]_enable > + Enable or disable the sensors. > + When disabled the sensor read will return -ENODATA. This > + attribute can be used as per-sensor or per-sub-group attribute > + depending on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > + > Some chips measure temperature using external thermistors and an ADC, and > report the temperature measurement as a voltage. Converting this voltage > back to a temperature (or the other way around for limits) requires > @@ -468,6 +495,15 @@ curr_reset_history > Reset currX_lowest and currX_highest for all sensors > WO > > +curr[1-*]_enable > + Enable or disable the sensors. > + When disabled the sensor read will return -ENODATA. This > + attribute can be used as per-sensor or per-sub-group attribute > + depending on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > + > Also see the Alarms section for status flags associated with currents. > > ********* > @@ -566,6 +602,15 @@ power[1-*]_crit Critical maximum power. > Unit: microWatt > RW > > +power[1-*]_enable Enable or disable the sensors. > + When disabled the sensor read will return > + -ENODATA. This attribute can be used as > + per-sensor or per-sub-group attribute depending > + on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > + > Also see the Alarms section for status flags associated with power readings. > > ********** > @@ -576,6 +621,14 @@ energy[1-*]_input Cumulative energy use > Unit: microJoule > RO > > +energy[1-*]_enable Enable or disable the sensors. > + When disabled the sensor read will return > + -ENODATA. This attribute can be used as > + per-sensor or per-sub-group attribute depending > + on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > > ************ > * Humidity * > @@ -586,6 +639,15 @@ humidity[1-*]_input Humidity > RO > > > +humidity[1-*]_enable Enable or disable the sensors > + When disabled the sensor read will return > + -ENODATA. This attribute can be used as > + per-sensor or per-sub-group attribute depending > + on what is supported by the hardware. > + 1: Enable > + 0: Disable > + RW > + > ********** > * Alarms * > ********** > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index fc337c3..f865dd7 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -171,6 +171,15 @@ in[0-*]_label Suggested voltage channel label. user-space. RO +in[0-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + cpu[0-*]_vid CPU core reference voltage. Unit: millivolt RO @@ -236,6 +245,15 @@ fan[1-*]_label Suggested fan channel label. In all other cases, the label is provided by user-space. RO +fan[1-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Also see the Alarms section for status flags associated with fans. @@ -409,6 +427,15 @@ temp_reset_history Reset temp_lowest and temp_highest for all sensors WO +temp[1-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Some chips measure temperature using external thermistors and an ADC, and report the temperature measurement as a voltage. Converting this voltage back to a temperature (or the other way around for limits) requires @@ -468,6 +495,15 @@ curr_reset_history Reset currX_lowest and currX_highest for all sensors WO +curr[1-*]_enable + Enable or disable the sensors. + When disabled the sensor read will return -ENODATA. This + attribute can be used as per-sensor or per-sub-group attribute + depending on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Also see the Alarms section for status flags associated with currents. ********* @@ -566,6 +602,15 @@ power[1-*]_crit Critical maximum power. Unit: microWatt RW +power[1-*]_enable Enable or disable the sensors. + When disabled the sensor read will return + -ENODATA. This attribute can be used as + per-sensor or per-sub-group attribute depending + on what is supported by the hardware. + 1: Enable + 0: Disable + RW + Also see the Alarms section for status flags associated with power readings. ********** @@ -576,6 +621,14 @@ energy[1-*]_input Cumulative energy use Unit: microJoule RO +energy[1-*]_enable Enable or disable the sensors. + When disabled the sensor read will return + -ENODATA. This attribute can be used as + per-sensor or per-sub-group attribute depending + on what is supported by the hardware. + 1: Enable + 0: Disable + RW ************ * Humidity * @@ -586,6 +639,15 @@ humidity[1-*]_input Humidity RO +humidity[1-*]_enable Enable or disable the sensors + When disabled the sensor read will return + -ENODATA. This attribute can be used as + per-sensor or per-sub-group attribute depending + on what is supported by the hardware. + 1: Enable + 0: Disable + RW + ********** * Alarms * **********
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> --- Documentation/hwmon/sysfs-interface | 62 +++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)