diff mbox

[1/2] hwmon: (mcp3021) rework for DT support

Message ID 20161019093824.24304-1-clemens.gruber@pqgruber.com (mailing list archive)
State Superseded
Headers show

Commit Message

Clemens Gruber Oct. 19, 2016, 9:38 a.m. UTC
Support setting the reference voltage from the device tree.
Rework of driver structure, put chip specific data in a separate
structure and assign it depending on device id from platform data or
DT match.
Extend the device documentation and also change S_IRUGO to the better
readable 0444, which fixes a checkpatch warning.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---
 Documentation/hwmon/mcp3021 |   5 ++
 drivers/hwmon/mcp3021.c     | 143 +++++++++++++++++++++++++++++++-------------
 2 files changed, 107 insertions(+), 41 deletions(-)
diff mbox

Patch

diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021
index 74a6b72..55792c3 100644
--- a/Documentation/hwmon/mcp3021
+++ b/Documentation/hwmon/mcp3021
@@ -12,6 +12,7 @@  Supported chips:
 Authors:
    Mingkai Hu
    Sven Schuchmann <schuchmann@schleissheimer.de>
+   Clemens Gruber <clemens.gruber@pqgruber.com>
 
 Description
 -----------
@@ -27,3 +28,7 @@  Communication to the MCP3021/MCP3221  is performed using a 2-wire I2C
 compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are
 available. The default I2C device address is 0x4d (contact the Microchip
 factory for additional address options).
+
+The reference-voltage used in the conversion can be set via platform data or
+device tree. Please refer to Documentation/devicetree/bindings/i2c/mcp3021.txt
+for information about the bindings if the device tree is used.
diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
index 972444a..89b26fb 100644
--- a/drivers/hwmon/mcp3021.c
+++ b/drivers/hwmon/mcp3021.c
@@ -4,6 +4,7 @@ 
  * Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
  * Author: Mingkai Hu <Mingkai.hu@freescale.com>
  * Reworked by Sven Schuchmann <schuchmann@schleissheimer.de>
+ * Copyright (C) 2016 Clemens Gruber <clemens.gruber@pqgruber.com>
  *
  * This driver export the value of analog input voltage to sysfs, the
  * voltage unit is mV. Through the sysfs interface, lm-sensors tool
@@ -22,37 +23,56 @@ 
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
-/* Vdd info */
+/* Vdd / reference voltage */
 #define MCP3021_VDD_MAX		5500
 #define MCP3021_VDD_MIN		2700
-#define MCP3021_VDD_REF		3300
-
-/* output format */
-#define MCP3021_SAR_SHIFT	2
-#define MCP3021_SAR_MASK	0x3ff
-#define MCP3021_OUTPUT_RES	10	/* 10-bit resolution */
-
-#define MCP3221_SAR_SHIFT	0
-#define MCP3221_SAR_MASK	0xfff
-#define MCP3221_OUTPUT_RES	12	/* 12-bit resolution */
+#define MCP3021_VDD_DEFAULT	3300
 
 enum chips {
 	mcp3021,
 	mcp3221
 };
 
+struct mcp3021_chip_info {
+	u16 sar_shift;
+	u16 sar_mask;
+	u8 output_res;
+};
+
 /*
  * Client data (each client gets its own)
  */
 struct mcp3021_data {
 	struct device *hwmon_dev;
-	u32 vdd;	/* device power supply */
-	u16 sar_shift;
-	u16 sar_mask;
-	u8 output_res;
+	const struct mcp3021_chip_info *chip_info;
+	u32 vdd; /* device power supply and reference voltage */
 };
 
+static const struct mcp3021_chip_info mcp3021_chip_info_tbl[] = {
+	[mcp3021] = {
+		.sar_shift = 2,
+		.sar_mask = 0x3ff,
+		.output_res = 10,	/* 10-bit resolution */
+	},
+	[mcp3221] = {
+		.sar_shift = 0,
+		.sar_mask = 0xfff,
+		.output_res = 12,	/* 12-bit resolution */
+	},
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_mcp3021_match[] = {
+	{ .compatible = "microchip,mcp3021", .data = (void *)mcp3021 },
+	{ .compatible = "microchip,mcp3221", .data = (void *)mcp3221 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_mcp3021_match);
+#endif
+
 static int mcp3021_read16(struct i2c_client *client)
 {
 	struct mcp3021_data *data = i2c_get_clientdata(client);
@@ -73,14 +93,15 @@  static int mcp3021_read16(struct i2c_client *client)
 	 * The ten-bit output code is composed of the lower 4-bit of the
 	 * first byte and the upper 6-bit of the second byte.
 	 */
-	reg = (reg >> data->sar_shift) & data->sar_mask;
+	reg = (reg >> data->chip_info->sar_shift) & data->chip_info->sar_mask;
 
 	return reg;
 }
 
 static inline u16 volts_from_reg(struct mcp3021_data *data, u16 val)
 {
-	return DIV_ROUND_CLOSEST(data->vdd * val, 1 << data->output_res);
+	return DIV_ROUND_CLOSEST(data->vdd * val,
+				 1 << data->chip_info->output_res);
 }
 
 static ssize_t show_in_input(struct device *dev, struct device_attribute *attr,
@@ -99,46 +120,83 @@  static ssize_t show_in_input(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", in_input);
 }
 
-static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input, NULL);
+static DEVICE_ATTR(in0_input, 0444, show_in_input, NULL);
 
-static int mcp3021_probe(struct i2c_client *client,
+#ifdef CONFIG_OF
+static int mcp3021_probe_dt(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
-	int err;
-	struct mcp3021_data *data = NULL;
+	struct mcp3021_data *data = i2c_get_clientdata(client);
+	struct device_node *np = client->dev.of_node;
+	const struct of_device_id *match;
+	int devid, ret;
 
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+	match = of_match_device(of_mcp3021_match, &client->dev);
+	if (!match)
 		return -ENODEV;
 
-	data = devm_kzalloc(&client->dev, sizeof(struct mcp3021_data),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	i2c_set_clientdata(client, data);
+	devid = (int)(uintptr_t)match->data;
+	data->chip_info = &mcp3021_chip_info_tbl[devid];
 
-	switch (id->driver_data) {
-	case mcp3021:
-		data->sar_shift = MCP3021_SAR_SHIFT;
-		data->sar_mask = MCP3021_SAR_MASK;
-		data->output_res = MCP3021_OUTPUT_RES;
-		break;
-
-	case mcp3221:
-		data->sar_shift = MCP3221_SAR_SHIFT;
-		data->sar_mask = MCP3221_SAR_MASK;
-		data->output_res = MCP3221_OUTPUT_RES;
-		break;
+	ret = of_property_read_u32(np, "reference-voltage", &data->vdd);
+	if (ret) {
+		/* fallback */
+		data->vdd = MCP3021_VDD_DEFAULT;
+		return 0;
 	}
 
+	if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
+		return -EINVAL;
+
+	return 0;
+}
+#else
+static int mcp3021_probe_dt(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	return 1;
+}
+#endif
+
+static int mcp3021_probe_pdata(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct mcp3021_data *data = i2c_get_clientdata(client);
+
+	data->chip_info = &mcp3021_chip_info_tbl[id->driver_data];
+
 	if (dev_get_platdata(&client->dev)) {
 		data->vdd = *(u32 *)dev_get_platdata(&client->dev);
 		if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
 			return -EINVAL;
 	} else {
-		data->vdd = MCP3021_VDD_REF;
+		data->vdd = MCP3021_VDD_DEFAULT;
 	}
 
+	return 0;
+}
+
+static int mcp3021_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct mcp3021_data *data = NULL;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENODEV;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+
+	err = mcp3021_probe_dt(client, id);
+	if (err > 0)
+		mcp3021_probe_pdata(client, id);
+	else if (err < 0)
+		return err;
+
 	err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
 	if (err)
 		return err;
@@ -176,6 +234,9 @@  MODULE_DEVICE_TABLE(i2c, mcp3021_id);
 static struct i2c_driver mcp3021_driver = {
 	.driver = {
 		.name = "mcp3021",
+#ifdef CONFIG_OF
+		.of_match_table = of_match_ptr(of_mcp3021_match),
+#endif
 	},
 	.probe = mcp3021_probe,
 	.remove = mcp3021_remove,