diff mbox

[v3,1/3] hwmon: (mcp3021) add devicetree support

Message ID 20161109171614.9730-1-clemens.gruber@pqgruber.com (mailing list archive)
State Superseded
Headers show

Commit Message

Clemens Gruber Nov. 9, 2016, 5:16 p.m. UTC
Support setting the reference voltage from the device tree.

Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
---
 drivers/hwmon/mcp3021.c | 46 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 10 deletions(-)

Comments

Guenter Roeck Nov. 9, 2016, 7:32 p.m. UTC | #1
On Wed, Nov 09, 2016 at 06:16:13PM +0100, Clemens Gruber wrote:
> Support setting the reference voltage from the device tree.
> 
> Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
> ---
>  drivers/hwmon/mcp3021.c | 46 ++++++++++++++++++++++++++++++++++++----------
>  1 file changed, 36 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
> index 972444a..81f4b7f 100644
> --- a/drivers/hwmon/mcp3021.c
> +++ b/drivers/hwmon/mcp3021.c
> @@ -4,6 +4,7 @@
>   * Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
>   * Author: Mingkai Hu <Mingkai.hu@freescale.com>
>   * Reworked by Sven Schuchmann <schuchmann@schleissheimer.de>
> + * Copyright (C) 2016 Clemens Gruber <clemens.gruber@pqgruber.com>

Sorry, I can't accept that for such a minor change. Feel free to add
something like "devicetree support added by ...", if you like.

>   *
>   * This driver export the value of analog input voltage to sysfs, the
>   * voltage unit is mV. Through the sysfs interface, lm-sensors tool
> @@ -22,11 +23,13 @@
>  #include <linux/i2c.h>
>  #include <linux/err.h>
>  #include <linux/device.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
> -/* Vdd info */
> +/* Vdd / reference voltage in millivolt */
>  #define MCP3021_VDD_MAX		5500
>  #define MCP3021_VDD_MIN		2700
> -#define MCP3021_VDD_REF		3300
> +#define MCP3021_VDD_DEFAULT	3300

I don't really see the value of changing this, but if it makes you
feel better at least make it MCP3021_VDD_REF_DEFAULT.

>  
>  /* output format */
>  #define MCP3021_SAR_SHIFT	2
> @@ -47,7 +50,7 @@ enum chips {
>   */
>  struct mcp3021_data {
>  	struct device *hwmon_dev;
> -	u32 vdd;	/* device power supply */
> +	u32 vdd;        /* supply and reference voltage in millivolt */
>  	u16 sar_shift;
>  	u16 sar_mask;
>  	u8 output_res;
> @@ -106,6 +109,7 @@ static int mcp3021_probe(struct i2c_client *client,
>  {
>  	int err;
>  	struct mcp3021_data *data = NULL;
> +	struct device_node *np = client->dev.of_node;
>  
>  	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
>  		return -ENODEV;
> @@ -117,6 +121,21 @@ static int mcp3021_probe(struct i2c_client *client,
>  
>  	i2c_set_clientdata(client, data);
>  
> +	if (np) {
> +		if (of_property_read_u32(np, "reference-voltage-microvolt",
> +					 &data->vdd))
> +			data->vdd = MCP3021_VDD_DEFAULT;
> +		else
> +			data->vdd /= 1000;

It would be slightly better to reverse the logic here to make the code easier
to read.

		if (!of_property_read_u32(np, "reference-voltage-microvolt",
					  &data->vdd))
			data->vdd /= 1000;
		else
			data->vdd = MCP3021_VDD_DEFAULT;

Not worth arguing about it, though, so feel free to keep it as is.

> +	} else {
> +		u32 *pdata = dev_get_platdata(&client->dev);
> +
> +		if (pdata)
> +			data->vdd = *pdata;
> +		else
> +			data->vdd = MCP3021_VDD_DEFAULT;
> +	}
> +
>  	switch (id->driver_data) {
>  	case mcp3021:
>  		data->sar_shift = MCP3021_SAR_SHIFT;
> @@ -129,15 +148,12 @@ static int mcp3021_probe(struct i2c_client *client,
>  		data->sar_mask = MCP3221_SAR_MASK;
>  		data->output_res = MCP3221_OUTPUT_RES;
>  		break;
> +	default:
> +		return -ENODEV;

Hmm ... that is really an unrelated change (nor is it really needed
unless there is a bug in the code). Not worth arguing about it either,
but please keep in mind that this is one of the things making life
hard for maintainers.

>  	}
>  
> -	if (dev_get_platdata(&client->dev)) {
> -		data->vdd = *(u32 *)dev_get_platdata(&client->dev);
> -		if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
> -			return -EINVAL;
> -	} else {
> -		data->vdd = MCP3021_VDD_REF;
> -	}
> +	if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
> +		return -EINVAL;
>  
>  	err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
>  	if (err)
> @@ -173,9 +189,19 @@ static const struct i2c_device_id mcp3021_id[] = {
>  };
>  MODULE_DEVICE_TABLE(i2c, mcp3021_id);
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id of_mcp3021_match[] = {
> +	{ .compatible = "microchip,mcp3021", .data = (void *)mcp3021 },
> +	{ .compatible = "microchip,mcp3221", .data = (void *)mcp3221 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, of_mcp3021_match);
> +#endif
> +
>  static struct i2c_driver mcp3021_driver = {
>  	.driver = {
>  		.name = "mcp3021",
> +		.of_match_table = of_match_ptr(of_mcp3021_match),
>  	},
>  	.probe = mcp3021_probe,
>  	.remove = mcp3021_remove,
> -- 
> 2.10.2
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Clemens Gruber Nov. 9, 2016, 8:43 p.m. UTC | #2
On Wed, Nov 09, 2016 at 11:32:06AM -0800, Guenter Roeck wrote:
> On Wed, Nov 09, 2016 at 06:16:13PM +0100, Clemens Gruber wrote:
> > Support setting the reference voltage from the device tree.
> > 
> > Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
> > ---
> >  drivers/hwmon/mcp3021.c | 46 ++++++++++++++++++++++++++++++++++++----------
> >  1 file changed, 36 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
> > index 972444a..81f4b7f 100644
> > --- a/drivers/hwmon/mcp3021.c
> > +++ b/drivers/hwmon/mcp3021.c
> > @@ -4,6 +4,7 @@
> >   * Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
> >   * Author: Mingkai Hu <Mingkai.hu@freescale.com>
> >   * Reworked by Sven Schuchmann <schuchmann@schleissheimer.de>
> > + * Copyright (C) 2016 Clemens Gruber <clemens.gruber@pqgruber.com>
> 
> Sorry, I can't accept that for such a minor change. Feel free to add
> something like "devicetree support added by ...", if you like.

I understand, no problem. I'll use your suggestion then.

> 
> >   *
> >   * This driver export the value of analog input voltage to sysfs, the
> >   * voltage unit is mV. Through the sysfs interface, lm-sensors tool
> > @@ -22,11 +23,13 @@
> >  #include <linux/i2c.h>
> >  #include <linux/err.h>
> >  #include <linux/device.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> >  
> > -/* Vdd info */
> > +/* Vdd / reference voltage in millivolt */
> >  #define MCP3021_VDD_MAX		5500
> >  #define MCP3021_VDD_MIN		2700
> > -#define MCP3021_VDD_REF		3300
> > +#define MCP3021_VDD_DEFAULT	3300
> 
> I don't really see the value of changing this, but if it makes you
> feel better at least make it MCP3021_VDD_REF_DEFAULT.

I changed it because all three defines are about the reference voltage,
not only the last one, which is just the default value.

Only changing the last one to MCP3021_VDD_REF_DEFAULT would not make it
less confusing.
Maybe replace MCP3021_VDD_ with MCP3021_VDD_REF_ for all three?

> 
> >  
> >  /* output format */
> >  #define MCP3021_SAR_SHIFT	2
> > @@ -47,7 +50,7 @@ enum chips {
> >   */
> >  struct mcp3021_data {
> >  	struct device *hwmon_dev;
> > -	u32 vdd;	/* device power supply */
> > +	u32 vdd;        /* supply and reference voltage in millivolt */
> >  	u16 sar_shift;
> >  	u16 sar_mask;
> >  	u8 output_res;
> > @@ -106,6 +109,7 @@ static int mcp3021_probe(struct i2c_client *client,
> >  {
> >  	int err;
> >  	struct mcp3021_data *data = NULL;
> > +	struct device_node *np = client->dev.of_node;
> >  
> >  	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> >  		return -ENODEV;
> > @@ -117,6 +121,21 @@ static int mcp3021_probe(struct i2c_client *client,
> >  
> >  	i2c_set_clientdata(client, data);
> >  
> > +	if (np) {
> > +		if (of_property_read_u32(np, "reference-voltage-microvolt",
> > +					 &data->vdd))
> > +			data->vdd = MCP3021_VDD_DEFAULT;
> > +		else
> > +			data->vdd /= 1000;
> 
> It would be slightly better to reverse the logic here to make the code easier
> to read.
> 
> 		if (!of_property_read_u32(np, "reference-voltage-microvolt",
> 					  &data->vdd))
> 			data->vdd /= 1000;
> 		else
> 			data->vdd = MCP3021_VDD_DEFAULT;

Yes, I'll change it.

> 
> Not worth arguing about it, though, so feel free to keep it as is.
> 
> > +	} else {
> > +		u32 *pdata = dev_get_platdata(&client->dev);
> > +
> > +		if (pdata)
> > +			data->vdd = *pdata;
> > +		else
> > +			data->vdd = MCP3021_VDD_DEFAULT;
> > +	}
> > +
> >  	switch (id->driver_data) {
> >  	case mcp3021:
> >  		data->sar_shift = MCP3021_SAR_SHIFT;
> > @@ -129,15 +148,12 @@ static int mcp3021_probe(struct i2c_client *client,
> >  		data->sar_mask = MCP3221_SAR_MASK;
> >  		data->output_res = MCP3221_OUTPUT_RES;
> >  		break;
> > +	default:
> > +		return -ENODEV;
> 
> Hmm ... that is really an unrelated change (nor is it really needed
> unless there is a bug in the code). Not worth arguing about it either,
> but please keep in mind that this is one of the things making life
> hard for maintainers.

I see, I'll remove it then.

Thank you for your feedback!

Clemens
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/hwmon/mcp3021.c b/drivers/hwmon/mcp3021.c
index 972444a..81f4b7f 100644
--- a/drivers/hwmon/mcp3021.c
+++ b/drivers/hwmon/mcp3021.c
@@ -4,6 +4,7 @@ 
  * Copyright (C) 2008-2009, 2012 Freescale Semiconductor, Inc.
  * Author: Mingkai Hu <Mingkai.hu@freescale.com>
  * Reworked by Sven Schuchmann <schuchmann@schleissheimer.de>
+ * Copyright (C) 2016 Clemens Gruber <clemens.gruber@pqgruber.com>
  *
  * This driver export the value of analog input voltage to sysfs, the
  * voltage unit is mV. Through the sysfs interface, lm-sensors tool
@@ -22,11 +23,13 @@ 
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
-/* Vdd info */
+/* Vdd / reference voltage in millivolt */
 #define MCP3021_VDD_MAX		5500
 #define MCP3021_VDD_MIN		2700
-#define MCP3021_VDD_REF		3300
+#define MCP3021_VDD_DEFAULT	3300
 
 /* output format */
 #define MCP3021_SAR_SHIFT	2
@@ -47,7 +50,7 @@  enum chips {
  */
 struct mcp3021_data {
 	struct device *hwmon_dev;
-	u32 vdd;	/* device power supply */
+	u32 vdd;        /* supply and reference voltage in millivolt */
 	u16 sar_shift;
 	u16 sar_mask;
 	u8 output_res;
@@ -106,6 +109,7 @@  static int mcp3021_probe(struct i2c_client *client,
 {
 	int err;
 	struct mcp3021_data *data = NULL;
+	struct device_node *np = client->dev.of_node;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
 		return -ENODEV;
@@ -117,6 +121,21 @@  static int mcp3021_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, data);
 
+	if (np) {
+		if (of_property_read_u32(np, "reference-voltage-microvolt",
+					 &data->vdd))
+			data->vdd = MCP3021_VDD_DEFAULT;
+		else
+			data->vdd /= 1000;
+	} else {
+		u32 *pdata = dev_get_platdata(&client->dev);
+
+		if (pdata)
+			data->vdd = *pdata;
+		else
+			data->vdd = MCP3021_VDD_DEFAULT;
+	}
+
 	switch (id->driver_data) {
 	case mcp3021:
 		data->sar_shift = MCP3021_SAR_SHIFT;
@@ -129,15 +148,12 @@  static int mcp3021_probe(struct i2c_client *client,
 		data->sar_mask = MCP3221_SAR_MASK;
 		data->output_res = MCP3221_OUTPUT_RES;
 		break;
+	default:
+		return -ENODEV;
 	}
 
-	if (dev_get_platdata(&client->dev)) {
-		data->vdd = *(u32 *)dev_get_platdata(&client->dev);
-		if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
-			return -EINVAL;
-	} else {
-		data->vdd = MCP3021_VDD_REF;
-	}
+	if (data->vdd > MCP3021_VDD_MAX || data->vdd < MCP3021_VDD_MIN)
+		return -EINVAL;
 
 	err = sysfs_create_file(&client->dev.kobj, &dev_attr_in0_input.attr);
 	if (err)
@@ -173,9 +189,19 @@  static const struct i2c_device_id mcp3021_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, mcp3021_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id of_mcp3021_match[] = {
+	{ .compatible = "microchip,mcp3021", .data = (void *)mcp3021 },
+	{ .compatible = "microchip,mcp3221", .data = (void *)mcp3221 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, of_mcp3021_match);
+#endif
+
 static struct i2c_driver mcp3021_driver = {
 	.driver = {
 		.name = "mcp3021",
+		.of_match_table = of_match_ptr(of_mcp3021_match),
 	},
 	.probe = mcp3021_probe,
 	.remove = mcp3021_remove,