| Message ID | 20170403233025.26952-2-jaghu@google.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
On 04/03/2017 04:30 PM, Jaghathiswari Rankappagounder Natarajan wrote: > This binding provides interface for adding values related to ASPEED > AST2400/2500 PWM and Fan tach controller support. > The PWM controller can support upto 8 PWM output ports. > The Fan tach controller can support upto 16 tachometer inputs. > > Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Applied with Acked-by: From Rob (for v5 with the requested changes made). Thanks, Guenter > --- > v6: > - Changed to aspeed,fan-tach-ch > > v5: > - Changed the naming scheme to aspeed,ast2400/2500-pwm-tacho > - Removed gpio pin muxing > - Added aspeed vendor prefix for fan-tach-ch > - Changed to fan@0/1 > - Changed reg to 32 bits > > v4: > - Used 'reg' > > v3: > - Made the structure more common > > v2: > - Removed '_' in node and property names > - Gave some explanation for the properties used > > .../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 68 ++++++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt > new file mode 100644 > index 000000000000..ac0a69ab0755 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt > @@ -0,0 +1,68 @@ > +ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver > + > +The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho > +controller can support upto 16 Fan tachometer inputs. > + > +There can be upto 8 fans supported. Each fan can have one PWM output and > +one/two Fan tach inputs. > + > +Required properties for pwm-tacho node: > +- #address-cells : should be 1. > + > +- #size-cells : should be 1. > + > +- reg : address and length of the register set for the device. > + > +- pinctrl-names : a pinctrl state named "default" must be defined. > + > +- pinctrl-0 : phandle referencing pin configuration of the PWM ports. > + > +- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and > + "aspeed,ast2500-pwm-tacho" for AST2500. > + > +- clocks : a fixed clock providing input clock frequency(PWM > + and Fan Tach clock) > + > +fan subnode format: > +=================== > +Under fan subnode there can upto 8 child nodes, with each child node > +representing a fan. If there are 8 fans each fan can have one PWM port and > +one/two Fan tach inputs. > + > +Required properties for each child node: > +- reg : should specify PWM source port. > + integer value in the range 0 to 7 with 0 indicating PWM port A and > + 7 indicating PWM port H. > + > +- aspeed,fan-tach-ch : should specify the Fan tach input channel. > + integer value in the range 0 through 15, with 0 indicating > + Fan tach channel 0 and 15 indicating Fan tach channel 15. > + Atleast one Fan tach input channel is required. > + > +Examples: > + > +pwm_tacho_fixed_clk: fixedclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > +} > + > +pwm_tacho: pwmtachocontroller@1e786000 { > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x1E786000 0x1000>; > + compatible = "aspeed,ast2500-pwm-tacho"; > + clocks = <&pwm_tacho_fixed_clk>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; > + > + fan@0 { > + reg = <0x00>; > + aspeed,fan-tach-ch = /bits/ 8 <0x00>; > + }; > + > + fan@1 { > + reg = <0x01>; > + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>; > + }; > +}; > -- > 2.12.2.715.g7642488e1d-goog > > -- > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt new file mode 100644 index 000000000000..ac0a69ab0755 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt @@ -0,0 +1,68 @@ +ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver + +The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho +controller can support upto 16 Fan tachometer inputs. + +There can be upto 8 fans supported. Each fan can have one PWM output and +one/two Fan tach inputs. + +Required properties for pwm-tacho node: +- #address-cells : should be 1. + +- #size-cells : should be 1. + +- reg : address and length of the register set for the device. + +- pinctrl-names : a pinctrl state named "default" must be defined. + +- pinctrl-0 : phandle referencing pin configuration of the PWM ports. + +- compatible : should be "aspeed,ast2400-pwm-tacho" for AST2400 and + "aspeed,ast2500-pwm-tacho" for AST2500. + +- clocks : a fixed clock providing input clock frequency(PWM + and Fan Tach clock) + +fan subnode format: +=================== +Under fan subnode there can upto 8 child nodes, with each child node +representing a fan. If there are 8 fans each fan can have one PWM port and +one/two Fan tach inputs. + +Required properties for each child node: +- reg : should specify PWM source port. + integer value in the range 0 to 7 with 0 indicating PWM port A and + 7 indicating PWM port H. + +- aspeed,fan-tach-ch : should specify the Fan tach input channel. + integer value in the range 0 through 15, with 0 indicating + Fan tach channel 0 and 15 indicating Fan tach channel 15. + Atleast one Fan tach input channel is required. + +Examples: + +pwm_tacho_fixed_clk: fixedclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; +} + +pwm_tacho: pwmtachocontroller@1e786000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1E786000 0x1000>; + compatible = "aspeed,ast2500-pwm-tacho"; + clocks = <&pwm_tacho_fixed_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01 0x02>; + }; +};
This binding provides interface for adding values related to ASPEED AST2400/2500 PWM and Fan tach controller support. The PWM controller can support upto 8 PWM output ports. The Fan tach controller can support upto 16 tachometer inputs. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> --- v6: - Changed to aspeed,fan-tach-ch v5: - Changed the naming scheme to aspeed,ast2400/2500-pwm-tacho - Removed gpio pin muxing - Added aspeed vendor prefix for fan-tach-ch - Changed to fan@0/1 - Changed reg to 32 bits v4: - Used 'reg' v3: - Made the structure more common v2: - Removed '_' in node and property names - Gave some explanation for the properties used .../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 68 ++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt -- 2.12.2.715.g7642488e1d-goog -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html