From patchwork Tue Apr 18 20:17:02 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Markus Mayer X-Patchwork-Id: 9686287 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 2C694602C2 for ; Tue, 18 Apr 2017 20:34:04 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1AFEB203C0 for ; Tue, 18 Apr 2017 20:34:04 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 0E9B3283F1; Tue, 18 Apr 2017 20:34:04 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id B5A3C203C0 for ; Tue, 18 Apr 2017 20:34:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754663AbdDRUeC (ORCPT ); Tue, 18 Apr 2017 16:34:02 -0400 Received: from smtp-out-so.shaw.ca ([64.59.136.138]:55413 "EHLO smtp-out-so.shaw.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754461AbdDRUeC (ORCPT ); Tue, 18 Apr 2017 16:34:02 -0400 X-Greylist: delayed 489 seconds by postgrey-1.27 at vger.kernel.org; Tue, 18 Apr 2017 16:34:01 EDT Received: from triton.mmayer.net ([96.48.165.49]) by shaw.ca with SMTP id 0ZgrdaRsuC3JI0ZgsdN5tL; Tue, 18 Apr 2017 14:25:35 -0600 X-Authority-Analysis: v=2.2 cv=XbT59Mx5 c=1 sm=1 tr=0 a=k5HOQ6ZN7M0zyjl8M7O1NA==:117 a=k5HOQ6ZN7M0zyjl8M7O1NA==:17 a=IkcTkHD0fZMA:10 a=AzvcPWV-tVgA:10 a=Q-fNiiVtAAAA:8 a=VwQbUJbxAAAA:8 a=pGLkceISAAAA:8 a=Laj8Nk9hVPfDzaDj4GoA:9 a=TPmxoY6INMsrynK1:21 a=jxCATFI3LViF1ccR:21 a=QEXdDO2ut3YA:10 a=Fp8MccfUoT0GBdDC_Lng:22 a=AjGcO6oz07-iQ99wixmX:22 a=6kGIvZw6iX1k4Y-7sg4_:22 Received: by triton.mmayer.net (Postfix, from userid 501) id E7B9E3E915D8; Tue, 18 Apr 2017 13:25:32 -0700 (PDT) From: Markus Mayer To: Jean Delvare , Guenter Roeck , Rob Herring , Mark Rutland , Florian Fainelli Cc: Markus Mayer , Broadcom Kernel List , Linux HWMON List , Device Tree List , ARM Kernel List , Linux Kernel Mailing List Subject: [PATCH 2/2] hwmon: (brcmstb) Add driver for Broadcom STB DPFE Date: Tue, 18 Apr 2017 13:17:02 -0700 Message-Id: <20170418201702.57019-3-code@mmayer.net> X-Mailer: git-send-email 2.12.0 In-Reply-To: <20170418201702.57019-1-code@mmayer.net> References: <20170418201702.57019-1-code@mmayer.net> MIME-Version: 1.0 X-CMAE-Envelope: MS4wfByEjBVAEf7IqB1hUCwZBeoyAGIVvJQWoTpa0EnJfnxJDA1kYdsUZs6kcRcfluBq8bpy0x9bYH2pZHUAadKrG9h6OI4li5/ZIq01V9XsuLUQHbYYsa3g reu01iOOhMHODUQpbjlB8cyFPJerjhjo/I6TDvG3xL2erjZoG718+0Tu8WbYN//zRGciG3PdwuIqEozLL9bwdUUn72TIrjO4naBPzR5ZcMniysUvuEE7nL8c 7MVlG5a2xuYd8+Uezkk4YbeZzK0dMR3P6Kpj2NaAZUUTguzNwsa/Ignub8Q9epAk0UVpmdmHNzmk4SEH9YF73I7BmIxtHL1hh/iYs/0NM0w2c2iOFLGXbYxP geK3QbdepJrgj5i+2sk4LYrkQV+3Z8o1CCwXyuEEt0gBRc0nSEPMEEuMswKlwGtg0L946IwnR9Y9tWO0f6jne5qmOP8CP8EaXLW6Dj9eNfUXTU+PmCJHkndh 6+HJvZMlVSvikqnaKJQ3nMlVYIBB0DFmu2bhlNSDszZW8RLKEwnqkUPrIOshFZhlQNM+dX6335OOAj5a Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Markus Mayer This driver allows access to DRAM properties, such as the refresh rate, via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be used as indirect indicator of the DRAM temperature. The driver also allows setting of the sampling interval. Signed-off-by: Markus Mayer --- MAINTAINERS | 8 + drivers/hwmon/Kconfig | 13 + drivers/hwmon/Makefile | 1 + drivers/hwmon/brcmstb-dpfe.c | 689 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 711 insertions(+) create mode 100644 drivers/hwmon/brcmstb-dpfe.c diff --git a/MAINTAINERS b/MAINTAINERS index 676c139..d2d0495 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2825,6 +2825,14 @@ S: Maintained F: Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt F: drivers/cpufreq/brcmstb* +BROADCOM STB DPFE HWMON DRIVER +M: Markus Mayer +M: bcm-kernel-feedback-list@broadcom.com +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/hwmon/brcmstb* +F: drivers/hwmon/brcmstb* + BROADCOM SPECIFIC AMBA DRIVER (BCMA) M: Rafał Miłecki L: linux-wireless@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0649d53f3..54bb55c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -355,6 +355,19 @@ config SENSORS_ATXP1 This driver can also be built as a module. If so, the module will be called atxp1. +config SENSORS_BRCMSTB_DPFE + tristate "BRCMSTB DPFE driver" + depends on ARCH_BRCMSTB + default y + help + If you say yes here you get support for the Broadcom set-top box + DDR PHY Front End (DPFE) interface. + + The driver allows one to query the DRAM refresh rate, which in turn, + provides an indirect means for deriving the DRAM temperature. + + If in doubt, say N. + config SENSORS_DS620 tristate "Dallas Semiconductor DS620" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 5509edf..cec13ec 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o # Native drivers # asb100, then w83781d go first, as they can override other drivers' addresses. obj-$(CONFIG_SENSORS_ASB100) += asb100.o +obj-$(CONFIG_SENSORS_BRCMSTB_DPFE) += brcmstb-dpfe.o obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o obj-$(CONFIG_SENSORS_W83792D) += w83792d.o obj-$(CONFIG_SENSORS_W83793) += w83793.o diff --git a/drivers/hwmon/brcmstb-dpfe.c b/drivers/hwmon/brcmstb-dpfe.c new file mode 100644 index 0000000..01abea8 --- /dev/null +++ b/drivers/hwmon/brcmstb-dpfe.c @@ -0,0 +1,689 @@ +/* + * Temperature sensor driver for Broadcom set top box SoCs + * + * Copyright (c) 2017 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "brcmstb-dpfe" +#define FIRMWARE_NAME "dpfe.bin" +#define DT_COMPAT_DMEM "brcm,dpfe-dmem" +#define DT_COMPAT_IMEM "brcm,dpfe-imem" + +/* DCPU register offsets */ +#define REG_DCPU_RESET 0x0 +#define REG_TO_DCPU_MBOX 0x10 +#define REG_TO_HOST_MBOX 0x14 + +/* Message RAM */ +#define DCPU_MSG_RAM(x) (0x100 + (x) * sizeof(u32)) + +/* DRAM Info Offsets & Masks */ +#define DRAM_INFO_INTERVAL 0x0 +#define DRAM_INFO_MR4 0x4 +#define DRAM_INFO_ERROR 0x8 +#define DRAM_INFO_MASK 0xff + +/* DRAM MR4 Offsets & Masks */ +#define DRAM_MR4_REFRESH 0x0 /* Refresh rate */ +#define DRAM_MR4_SR_ABORT 0x3 /* Self Refresh Abort */ +#define DRAM_MR4_PPRE 0x4 /* Post-package repair entry/exit */ +#define DRAM_MR4_TH_OFFS 0x5 /* Thermal Offset; vendor specific */ +#define DRAM_MR4_TUF 0x7 /* Temperature Update Flag */ + +#define DRAM_MR4_REFRESH_MASK 0x7 +#define DRAM_MR4_SR_ABORT_MASK 0x1 +#define DRAM_MR4_PPRE_MASK 0x1 +#define DRAM_MR4_TH_OFFS_MASK 0x3 +#define DRAM_MR4_TUF_MASK 0x1 + +/* DRAM Vendor Offsets & Masks */ +#define DRAM_VENDOR_MR5 0x0 +#define DRAM_VENDOR_MR6 0x4 +#define DRAM_VENDOR_MR7 0x8 +#define DRAM_VENDOR_MR8 0xc +#define DRAM_VENDOR_ERROR 0x10 +#define DRAM_VENDOR_MASK 0xff + +/* Reset register bits & masks */ +#define DCPU_RESET_SHIFT 0x0 +#define DCPU_RESET_MASK 0x1 +#define DCPU_CLK_DISABLE_SHIFT 0x2 + +/* DCPU return codes */ +#define DCPU_RET_SUCCESS 0x00000001 +#define DCPU_RET_ERR_HEADER 0x80000001 +#define DCPU_RET_ERR_INVAL 0x80000002 +#define DCPU_RET_ERR_CHKSUM 0x80000004 +#define DCPU_RET_ERR_OTHER 0x80000008 + +/* Firmware magic */ +#define DPFE_BE_MAGIC 0xfe1010fe +#define DPFE_LE_MAGIC 0xfe0101fe + +/* Error codes */ +#define ERR_INVALID_MAGIC -1 +#define ERR_INVALID_SIZE -2 +#define ERR_INVALID_CHKSUM -3 + +/* Message types */ +#define DPFE_MSG_TYPE_COMMAND 1 +#define DPFE_MSG_TYPE_RESPONSE 2 + +#define DELAY_LOOP_MAX 200000 + +enum dpfe_msg_fields { + MSG_HEADER, + MSG_COMMAND, + MSG_ARG_COUNT, + MSG_ARG0, + MSG_CHKSUM, + MSG_FIELD_MAX /* Last entry */ +}; + +enum dpfe_commands { + DPFE_CMD_GET_INFO, + DPFE_CMD_GET_REFRESH, + DPFE_CMD_GET_VENDOR, + DPFE_CMD_MAX /* Last entry */ +}; + +struct dpfe_msg { + u32 header; + u32 command; + u32 arg_count; + u32 arg0; + u32 chksum; /* This is the sum of all other entries. */ +}; + +/* + * Format of the binary firmware file: + * + * entry + * 0 header + * value: 0xfe0101fe <== little endian + * 0xfe1010fe <== big endian + * 1 sequence: + * [31:16] total segments on this build + * [15:0] this segment sequence. + * 2 FW version + * 3 IMEM byte size + * 4 DMEM byte size + * IMEM + * DMEM + * last checksum ==> sum of everything + */ +struct dpfe_firmware_header { + u32 magic; + u32 sequence; + u32 version; + u32 imem_size; + u32 dmem_size; +}; + +/* Things we only need during initialization. */ +struct init_data { + void __iomem *dmem; + void __iomem *imem; + unsigned int dmem_len; + unsigned int imem_len; + unsigned int chksum; + bool is_big_endian; +}; + +/* Things we need for as long as we are active. */ +struct private_data { + void __iomem *regs; + void __iomem *dmem; + struct mutex lock; +}; + +/* List of supported firmware commands */ +const u32 dpfe_commands[DPFE_CMD_MAX][MSG_FIELD_MAX] = { + [DPFE_CMD_GET_INFO] = { + [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, + [MSG_COMMAND] = 1, + [MSG_ARG_COUNT] = 1, + [MSG_ARG0] = 1, + [MSG_CHKSUM] = 4, + }, + [DPFE_CMD_GET_REFRESH] = { + [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, + [MSG_COMMAND] = 2, + [MSG_ARG_COUNT] = 1, + [MSG_ARG0] = 1, + [MSG_CHKSUM] = 5, + }, + [DPFE_CMD_GET_VENDOR] = { + [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND, + [MSG_COMMAND] = 2, + [MSG_ARG_COUNT] = 1, + [MSG_ARG0] = 2, + [MSG_CHKSUM] = 6, + }, +}; + +static u32 dpfe_readl(const void __iomem *addr) +{ + return le32_to_cpu(readl_relaxed(addr)); +} + +static void dpfe_writel(u32 value, void __iomem *addr) +{ + writel_relaxed(cpu_to_le32(value), addr); +} + +static void __iomem *__map_region(const char *name) +{ + struct device_node *np; + void __iomem *ptr; + + np = of_find_compatible_node(NULL, NULL, name); + if (!np) + return NULL; + + ptr = of_iomap(np, 0); + of_node_put(np); + + return ptr; +} + +static void __disable_dcpu(void __iomem *regs) +{ + u32 val; + + /* Check if DCPU is running */ + val = dpfe_readl(regs + REG_DCPU_RESET); + if (!(val & DCPU_RESET_MASK)) { + /* Put DCPU in reset */ + val |= (1 << DCPU_RESET_SHIFT); + dpfe_writel(val, regs + REG_DCPU_RESET); + } +} + +static void __enable_dcpu(void __iomem *regs) +{ + u32 val; + + /* Clear mailbox registers. */ + dpfe_writel(0, regs + REG_TO_DCPU_MBOX); + dpfe_writel(0, regs + REG_TO_HOST_MBOX); + + /* Disable DCPU clock gating */ + val = dpfe_readl(regs + REG_DCPU_RESET); + val &= ~(1 << DCPU_CLK_DISABLE_SHIFT); + dpfe_writel(val, regs + REG_DCPU_RESET); + + /* Take DCPU out of reset */ + val = dpfe_readl(regs + REG_DCPU_RESET); + val &= ~(1 << DCPU_RESET_SHIFT); + dpfe_writel(val, regs + REG_DCPU_RESET); +} + +static unsigned int get_msg_chksum(const u32 msg[]) +{ + unsigned int sum = 0; + unsigned int i; + + /* Don't include the last field in the checksum. */ + for (i = 0; i < MSG_FIELD_MAX - 1; i++) + sum += msg[i]; + + return sum; +} + +static int __send_command(struct private_data *priv, unsigned int cmd, + u32 result[]) +{ + const u32 *msg = dpfe_commands[cmd]; + void __iomem *regs = priv->regs; + unsigned int i, chksum; + int ret = 0; + u32 resp; + + if (cmd >= DPFE_CMD_MAX) + return -1; + + mutex_lock(&priv->lock); + + /* Write command and arguments to message area */ + for (i = 0; i < MSG_FIELD_MAX; i++) + dpfe_writel(msg[i], regs + DCPU_MSG_RAM(i)); + + /* Tell DCPU there is a command waiting */ + dpfe_writel(1, regs + REG_TO_DCPU_MBOX); + + /* Wait for DCPU to process the command */ + for (i = 0; i < DELAY_LOOP_MAX; i++) { + /* Read response code */ + resp = dpfe_readl(regs + REG_TO_HOST_MBOX); + if (resp > 0) + break; + udelay(5); + } + if (i == DELAY_LOOP_MAX) + ret = -ETIMEDOUT; + + /* Read response data */ + for (i = 0; i < MSG_FIELD_MAX; i++) + result[i] = dpfe_readl(regs + DCPU_MSG_RAM(i)); + + /* Tell DCPU we are done */ + dpfe_writel(0, regs + REG_TO_HOST_MBOX); + + mutex_unlock(&priv->lock); + + if (!ret) { + /* Verify response */ + chksum = get_msg_chksum(result); + if (chksum != result[MSG_CHKSUM]) + ret = -1; + } + + if (!ret) { + switch (resp) { + case DCPU_RET_SUCCESS: + break; + case DCPU_RET_ERR_HEADER: + case DCPU_RET_ERR_INVAL: + case DCPU_RET_ERR_CHKSUM: + case DCPU_RET_ERR_OTHER: + ret = -1; + break; + } + } + + return ret; +} + +/* Ensure that the firmware file loaded meets all the requirements. */ +static int __verify_firmware(struct init_data *init, + const struct firmware *fw) +{ + const struct dpfe_firmware_header *header = (void *)fw->data; + unsigned int dmem_size, imem_size, total_size; + bool is_big_endian = false; + const u32 *chksum; + + if (header->magic == DPFE_BE_MAGIC) + is_big_endian = true; + else if (header->magic != DPFE_LE_MAGIC) + return ERR_INVALID_MAGIC; + + if (is_big_endian) { + dmem_size = be32_to_cpu(header->dmem_size); + imem_size = be32_to_cpu(header->imem_size); + } else { + dmem_size = header->dmem_size; + imem_size = header->imem_size; + } + + /* Data and instruction sections are 32 bit words. */ + if ((dmem_size % sizeof(u32)) != 0 || (imem_size % sizeof(u32)) != 0) + return ERR_INVALID_SIZE; + + /* + * The header + the data section + the instruction section + the + * checksum must be equal to the total firmware size. + */ + total_size = dmem_size + imem_size + sizeof(*header) + sizeof(*chksum); + if (total_size != fw->size) + return ERR_INVALID_SIZE; + + /* The checksum comes at the very end. */ + chksum = (void *)fw->data + sizeof(*header) + dmem_size + imem_size; + + init->is_big_endian = is_big_endian; + init->dmem_len = dmem_size; + init->imem_len = imem_size; + init->chksum = (is_big_endian) ? be32_to_cpu(*chksum) : *chksum; + + return 0; +} + +/* Verify checksum by reading back the firmware from co-processor RAM. */ +static int __verify_fw_checksum(struct init_data *init, + const struct dpfe_firmware_header *header, + u32 checksum) +{ + u32 magic, sequence, version, sum; + u32 __iomem *dmem = init->dmem; + u32 __iomem *imem = init->imem; + unsigned int i; + + if (init->is_big_endian) { + magic = be32_to_cpu(header->magic); + sequence = be32_to_cpu(header->sequence); + version = be32_to_cpu(header->version); + } else { + magic = header->magic; + sequence = header->sequence; + version = header->version; + } + + sum = magic + sequence + version + init->dmem_len + init->imem_len; + + for (i = 0; i < init->dmem_len / sizeof(u32); i++) + sum += dpfe_readl(dmem + i); + + for (i = 0; i < init->imem_len / sizeof(u32); i++) + sum += dpfe_readl(imem + i); + + return (sum == checksum) ? 0 : -1; +} + +static int __write_firmware(u32 __iomem *mem, const u32 *fw, + unsigned int size, bool is_big_endian) +{ + unsigned int i; + + /* Convert size to 32-bit words. */ + size /= sizeof(u32); + + /* It is recommended to clear the firmware area first. */ + for (i = 0; i < size; i++) + dpfe_writel(0, mem + i); + + /* Now copy it. */ + if (is_big_endian) { + for (i = 0; i < size; i++) + dpfe_writel(be32_to_cpu(fw[i]), mem + i); + } else { + for (i = 0; i < size; i++) + dpfe_writel(fw[i], mem + i); + } + + return 0; +} + +static int brcmstb_hwmon_download_firwmare(struct platform_device *pdev, + struct init_data *init) +{ + const struct dpfe_firmware_header *header; + unsigned int dmem_size, imem_size; + struct device *dev = &pdev->dev; + bool is_big_endian = false; + struct private_data *priv; + const struct firmware *fw; + const u32 *dmem, *imem; + const void *fw_blob; + int ret; + + ret = request_firmware(&fw, FIRMWARE_NAME, dev); + /* request_firmware() prints its own error messages. */ + if (ret) + return ret; + + priv = platform_get_drvdata(pdev); + + ret = __verify_firmware(init, fw); + if (ret) + return -EFAULT; + + __disable_dcpu(priv->regs); + + is_big_endian = init->is_big_endian; + dmem_size = init->dmem_len; + imem_size = init->imem_len; + + /* At the beginning of the firmware blob is a header. */ + header = (struct dpfe_firmware_header *)fw->data; + /* Void pointer to the beginning of the actual firmware. */ + fw_blob = fw->data + sizeof(*header); + /* IMEM comes right after the header. */ + imem = fw_blob; + /* DMEM follows after IMEM. */ + dmem = fw_blob + imem_size; + + ret = __write_firmware(init->dmem, dmem, dmem_size, is_big_endian); + if (ret) + return ret; + ret = __write_firmware(init->imem, imem, imem_size, is_big_endian); + if (ret) + return ret; + + ret = __verify_fw_checksum(init, header, init->chksum); + if (ret) + return ret; + + __enable_dcpu(priv->regs); + + return 0; +} + +static ssize_t generic_show(unsigned int command, u32 response[], + struct device *dev, char *buf) +{ + struct private_data *priv; + int ret; + + priv = dev_get_drvdata(dev); + + ret = __send_command(priv, command, response); + if (ret) + return sprintf(buf, "error %d\n", ret); + + return 0; +} + +static ssize_t show_info(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + u32 response[MSG_FIELD_MAX]; + unsigned int info; + int ret; + + ret = generic_show(DPFE_CMD_GET_INFO, response, dev, buf); + if (ret) + return ret; + + info = response[MSG_ARG0]; + + return sprintf(buf, "%u.%u.%u.%u\n", + (info >> 24) & 0xff, + (info >> 16) & 0xff, + (info >> 8) & 0xff, + info & 0xff); +} + +static ssize_t show_refresh(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + u32 response[MSG_FIELD_MAX]; + void __iomem *info; + struct private_data *priv; + unsigned int offset; + u8 refresh, sr_abort, ppre, thermal_offs, tuf; + u32 mr4; + int ret; + + ret = generic_show(DPFE_CMD_GET_REFRESH, response, dev, buf); + if (ret) + return ret; + + priv = dev_get_drvdata(dev); + offset = response[MSG_ARG0]; + info = priv->dmem + offset; + + mr4 = dpfe_readl(info + DRAM_INFO_MR4) & DRAM_INFO_MASK; + + refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK; + sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK; + ppre = (mr4 >> DRAM_MR4_PPRE) & DRAM_MR4_PPRE_MASK; + thermal_offs = (mr4 >> DRAM_MR4_TH_OFFS) & DRAM_MR4_TH_OFFS_MASK; + tuf = (mr4 >> DRAM_MR4_TUF) & DRAM_MR4_TUF_MASK; + + return sprintf(buf, "%#x %#x %#x %#x %#x %#x %#x\n", + dpfe_readl(info + DRAM_INFO_INTERVAL), + refresh, sr_abort, ppre, thermal_offs, tuf, + dpfe_readl(info + DRAM_INFO_ERROR)); +} + +static ssize_t store_refresh(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 response[MSG_FIELD_MAX]; + struct private_data *priv; + void __iomem *info; + unsigned int offset; + unsigned long val; + int ret; + + if (kstrtoul(buf, 0, &val) < 0) + return -EINVAL; + + priv = dev_get_drvdata(dev); + + ret = __send_command(priv, DPFE_CMD_GET_REFRESH, response); + if (ret) + return ret; + + offset = response[MSG_ARG0]; + info = priv->dmem + offset + DRAM_MR4_REFRESH; + dpfe_writel(val, info); + + return count; +} + + +static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + u32 response[MSG_FIELD_MAX]; + struct private_data *priv; + void __iomem *info; + unsigned int offset; + int ret; + + ret = generic_show(DPFE_CMD_GET_VENDOR, response, dev, buf); + if (ret) + return ret; + + offset = response[MSG_ARG0]; + priv = dev_get_drvdata(dev); + info = priv->dmem + offset; + + return sprintf(buf, "%#x %#x %#x %#x %#x\n", + dpfe_readl(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK, + dpfe_readl(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK, + dpfe_readl(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK, + dpfe_readl(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK, + dpfe_readl(info + DRAM_VENDOR_ERROR)); +} + +static SENSOR_DEVICE_ATTR(dpfe_info, 0444, show_info, NULL, 1000); +static SENSOR_DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh, + 1000); +static SENSOR_DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL, 1000); +static struct attribute *dpfe_attrs[] = { + &sensor_dev_attr_dpfe_info.dev_attr.attr, + &sensor_dev_attr_dpfe_refresh.dev_attr.attr, + &sensor_dev_attr_dpfe_vendor.dev_attr.attr, + NULL +}; +ATTRIBUTE_GROUPS(dpfe); + +static int brcmstb_hwmon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device *hwmon_dev = NULL; + struct private_data *priv; + struct init_data init; + struct resource *res; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->regs)) { + dev_err(dev, "couldn't map DT entry brcm,dpfe-cpu\n"); + return -ENODEV; + } + + init.dmem = __map_region(DT_COMPAT_DMEM); + if (!init.dmem) { + dev_err(dev, "Couldn't map %s\n", DT_COMPAT_DMEM); + return -ENOENT; + } + init.imem = __map_region(DT_COMPAT_IMEM); + if (init.imem) { + ret = brcmstb_hwmon_download_firwmare(pdev, &init); + } else { + ret = -ENOENT; + dev_err(dev, "Couldn't map %s\n", DT_COMPAT_IMEM); + } + + /* We don't need IMEM after initialization. */ + iounmap(init.imem); + + if (!ret) { + hwmon_dev = devm_hwmon_device_register_with_groups(dev, + "brcmstb_dpfe", priv, dpfe_groups); + if (IS_ERR(hwmon_dev)) + ret = PTR_ERR(hwmon_dev); + } + + if (ret) { + iounmap(init.dmem); + dev_err(dev, "failed to initialize -- error %d\n", ret); + } else { + priv->dmem = init.dmem; + dev_info(dev, "registered.\n"); + } + + return ret; +} + +static int brcmstb_hwmon_remove(struct platform_device *pdev) +{ + struct private_data *priv; + + priv = platform_get_drvdata(pdev); + iounmap(priv->dmem); + + return 0; +} + +static const struct of_device_id brcmstb_hwmon_of_match[] = { + { .compatible = "brcm,dpfe-cpu", }, + {} +}; +MODULE_DEVICE_TABLE(of, brcmstb_hwmon_of_match); + +static struct platform_driver brcmstb_hwmon_driver = { + .driver = { + .name = DRVNAME, + .of_match_table = brcmstb_hwmon_of_match, + }, + .probe = brcmstb_hwmon_probe, + .remove = brcmstb_hwmon_remove, +}; + +module_platform_driver(brcmstb_hwmon_driver); + +MODULE_AUTHOR("Markus Mayer "); +MODULE_DESCRIPTION("BRCMSTB Hardware Monitoring"); +MODULE_LICENSE("GPL");