diff mbox series

[v7,05/12] ARM: dts: aspeed: peci: Add PECI node

Message ID 20180723214751.1733-6-jae.hyun.yoo@linux.intel.com (mailing list archive)
State Not Applicable
Headers show
Series PECI device driver introduction | expand

Commit Message

Jae Hyun Yoo July 23, 2018, 9:47 p.m. UTC 
This commit adds PECI bus/adapter node of AST24xx/AST25xx into
aspeed-g4 and aspeed-g5.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 26 ++++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 26 ++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 680336ac06f8..1177c76a8a9d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -29,6 +29,7 @@ 
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &vuart;
+		peci0 = &peci0;
 	};
 
 	cpus {
@@ -311,6 +312,13 @@ 
 				};
 			};
 
+			peci: peci@1e78b000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e78b000 0x60>;
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -354,6 +362,24 @@ 
 	};
 };
 
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "aspeed,ast2400-peci";
+		reg = <0x0 0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <15>;
+		clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+		resets = <&syscon ASPEED_RESET_PECI>;
+		clock-frequency = <24000000>;
+		msg-timing = <1>;
+		addr-timing = <1>;
+		rd-sampling-point = <8>;
+		cmd-timeout-ms = <1000>;
+		status = "disabled";
+	};
+};
+
 &i2c {
 	i2c_ic: interrupt-controller@0 {
 		#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 02e70ad3ab70..f93f174bc149 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -29,6 +29,7 @@ 
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &vuart;
+		peci0 = &peci0;
 	};
 
 	cpus {
@@ -370,6 +371,13 @@ 
 				};
 			};
 
+			peci: peci@1e78b000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e78b000 0x60>;
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -413,6 +421,24 @@ 
 	};
 };
 
+&peci {
+	peci0: peci-bus@0 {
+		compatible = "aspeed,ast2500-peci";
+		reg = <0x0 0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <15>;
+		clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+		resets = <&syscon ASPEED_RESET_PECI>;
+		clock-frequency = <24000000>;
+		msg-timing = <1>;
+		addr-timing = <1>;
+		rd-sampling-point = <8>;
+		cmd-timeout-ms = <1000>;
+		status = "disabled";
+	};
+};
+
 &i2c {
 	i2c_ic: interrupt-controller@0 {
 		#interrupt-cells = <1>;