@@ -198,13 +198,13 @@ static int RANGE_TO_REG(long range)
#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f]
/* These are the PWM frequency encodings */
-static const int lm85_freq_map[8] = { /* 1 Hz */
+static const int lm85_freq_map[] = { /* 1 Hz */
10, 15, 23, 30, 38, 47, 61, 94
};
-static const int adm1027_freq_map[8] = { /* 1 Hz */
+
+static const int adm1027_freq_map[] = { /* 1 Hz */
11, 15, 22, 29, 35, 44, 59, 88
};
-#define FREQ_MAP_LEN 8
static int FREQ_TO_REG(const int *map,
unsigned int map_size, unsigned long freq)
@@ -212,9 +212,9 @@ static int FREQ_TO_REG(const int *map,
return find_closest(freq, map, map_size);
}
-static int FREQ_FROM_REG(const int *map, u8 reg)
+static int FREQ_FROM_REG(const int *map, unsigned int map_size, u8 reg)
{
- return map[reg & 0x07];
+ return map[reg % map_size];
}
/*
@@ -296,6 +296,8 @@ struct lm85_data {
struct i2c_client *client;
const struct attribute_group *groups[6];
const int *freq_map;
+ unsigned int freq_map_size;
+
enum chips type;
bool has_vid5; /* true if VID5 is configured for ADT7463 or ADT7468 */
@@ -514,7 +516,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
data->autofan[i].config =
lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
- data->pwm_freq[i] = val & 0x07;
+ data->pwm_freq[i] = val % data->freq_map_size;
data->zone[i].range = val >> 4;
data->autofan[i].min_pwm =
lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
@@ -791,7 +793,8 @@ static ssize_t show_pwm_freq(struct device *dev,
if (IS_ADT7468_HFPWM(data))
freq = 22500;
else
- freq = FREQ_FROM_REG(data->freq_map, data->pwm_freq[nr]);
+ freq = FREQ_FROM_REG(data->freq_map, data->freq_map_size,
+ data->pwm_freq[nr]);
return sprintf(buf, "%d\n", freq);
}
@@ -820,7 +823,7 @@ static ssize_t set_pwm_freq(struct device *dev,
lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
} else { /* Low freq. mode */
data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map,
- FREQ_MAP_LEN, val);
+ data->freq_map_size, val);
lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
(data->zone[nr].range << 4)
| data->pwm_freq[nr]);
@@ -1196,7 +1199,7 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
TEMP_FROM_REG(data->zone[nr].limit));
lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
((data->zone[nr].range & 0x0f) << 4)
- | (data->pwm_freq[nr] & 0x07));
+ | data->pwm_freq[nr]);
mutex_unlock(&data->update_lock);
return count;
@@ -1232,7 +1235,7 @@ static ssize_t set_temp_auto_temp_max(struct device *dev,
val - min);
lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
((data->zone[nr].range & 0x0f) << 4)
- | (data->pwm_freq[nr] & 0x07));
+ | data->pwm_freq[nr]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -1569,9 +1572,11 @@ static int lm85_probe(struct i2c_client *client, const struct i2c_device_id *id)
case emc6d103:
case emc6d103s:
data->freq_map = adm1027_freq_map;
+ data->freq_map_size = ARRAY_SIZE(adm1027_freq_map);
break;
default:
data->freq_map = lm85_freq_map;
+ data->freq_map_size = ARRAY_SIZE(lm85_freq_map);
}
/* Set the VRM version */
Allow support for chips that support more than 8 frequencies. Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com> --- drivers/hwmon/lm85.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)