@@ -96,13 +96,20 @@ struct k10temp_data {
void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
int temp_offset;
u32 temp_adjust_mask;
- bool show_tdie;
- u32 show_tccd;
+ u32 show_temp;
u32 svi_addr[2];
+ bool is_zen;
bool show_current;
int cfactor[2];
};
+#define TCTL_BIT 0
+#define TDIE_BIT 1
+#define TCCD_BIT(x) ((x) + 2)
+
+#define HAVE_TEMP(d, channel) ((d)->show_temp & BIT(channel))
+#define HAVE_TDIE(d) HAVE_TEMP(d, TDIE_BIT)
+
struct tctl_offset {
u8 model;
char const *id;
@@ -333,23 +340,11 @@ static umode_t k10temp_is_visible(const void *_data,
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
- switch (channel) {
- case 0: /* Tctl */
- break;
- case 1: /* Tdie */
- if (!data->show_tdie)
- return 0;
- break;
- case 2 ... 9: /* Tccd{1-8} */
- if (!(data->show_tccd & BIT(channel - 2)))
- return 0;
- break;
- default:
+ if (!HAVE_TEMP(data, channel))
return 0;
- }
break;
case hwmon_temp_max:
- if (channel || data->show_tdie)
+ if (channel || data->is_zen)
return 0;
break;
case hwmon_temp_crit:
@@ -368,20 +363,9 @@ static umode_t k10temp_is_visible(const void *_data,
return 0;
break;
case hwmon_temp_label:
- /* No labels if we don't show the die temperature */
- if (!data->show_tdie)
- return 0;
- switch (channel) {
- case 0: /* Tctl */
- case 1: /* Tdie */
- break;
- case 2 ... 9: /* Tccd{1-8} */
- if (!(data->show_tccd & BIT(channel - 2)))
- return 0;
- break;
- default:
+ /* Show temperature labels only on Zen CPUs */
+ if (!data->is_zen || !HAVE_TEMP(data, channel))
return 0;
- }
break;
default:
return 0;
@@ -480,7 +464,7 @@ static void k10temp_init_debugfs(struct k10temp_data *data)
char name[32];
/* Only show debugfs data for Family 17h/18h CPUs */
- if (!data->show_tdie)
+ if (!data->is_zen)
return;
scnprintf(name, sizeof(name), "k10temp-%s", pci_name(data->pdev));
@@ -546,7 +530,7 @@ static void k10temp_get_ccd_support(struct pci_dev *pdev,
amd_smn_read(amd_pci_dev_to_node_id(pdev),
F17H_M70H_CCD_TEMP(i), ®val);
if (regval & F17H_M70H_CCD_TEMP_VALID)
- data->show_tccd |= BIT(i);
+ data->show_temp |= BIT(TCCD_BIT(i));
}
}
@@ -573,6 +557,7 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENOMEM;
data->pdev = pdev;
+ data->show_temp |= BIT(TCTL_BIT); /* Always show Tctl */
if (boot_cpu_data.x86 == 0x15 &&
((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
@@ -582,7 +567,8 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_f17;
- data->show_tdie = true;
+ data->show_temp |= BIT(TDIE_BIT); /* show Tdie */
+ data->is_zen = true;
switch (boot_cpu_data.x86_model) {
case 0x1: /* Zen */
Use a bit map to describe if temperature channels are supported, and use it for all temperature channels. Use a separate flag, independent of Tdie support, to indicate if the system is running on a Ryzen CPU. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- drivers/hwmon/k10temp.c | 50 +++++++++++++++-------------------------- 1 file changed, 18 insertions(+), 32 deletions(-)