From patchwork Thu Apr 2 20:36:46 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 11471537 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9E4AF1874 for ; Thu, 2 Apr 2020 20:38:08 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7C5AF20857 for ; Thu, 2 Apr 2020 20:38:08 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=walle.cc header.i=@walle.cc header.b="IravxJ6N" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389733AbgDBUhR (ORCPT ); Thu, 2 Apr 2020 16:37:17 -0400 Received: from ssl.serverraum.org ([176.9.125.105]:59185 "EHLO ssl.serverraum.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389424AbgDBUhQ (ORCPT ); Thu, 2 Apr 2020 16:37:16 -0400 Received: from apollo.fritz.box (unknown [IPv6:2a02:810c:c200:2e91:6257:18ff:fec4:ca34]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by ssl.serverraum.org (Postfix) with ESMTPSA id E728B23D1F; Thu, 2 Apr 2020 22:37:12 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=walle.cc; s=mail2016061301; t=1585859833; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=FpYqkdEAoZvWWgB0Fi0mHDSANxSIbyKDKfZDpvgpetA=; b=IravxJ6NBA/WHqhd/Ap2TxqW+Ltp5fGsi4WJyi6IlAbyPdzYlwbV7zZYyccA17ha3w0v2J juwMp3lVo4nlsyuW5NZ2cvCaqMtqVXivatZNCgoF/Mkve/R7X7ixye7C2abcMAdGilYmXH 2xoFmQyBAWVFKMNnWRKmSRPTCOqnJNE= From: Michael Walle To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Linus Walleij , Bartosz Golaszewski , Rob Herring , Jean Delvare , Guenter Roeck , Lee Jones , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Wim Van Sebroeck , Shawn Guo , Li Yang , Thomas Gleixner , Jason Cooper , Marc Zyngier , Mark Brown , Greg Kroah-Hartman , Michael Walle Subject: [PATCH v2 06/16] mfd: Add support for Kontron sl28cpld management controller Date: Thu, 2 Apr 2020 22:36:46 +0200 Message-Id: <20200402203656.27047-7-michael@walle.cc> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20200402203656.27047-1-michael@walle.cc> References: <20200402203656.27047-1-michael@walle.cc> MIME-Version: 1.0 X-Spamd-Bar: ++++++ X-Spam-Level: ****** X-Rspamd-Server: web X-Spam-Status: Yes, score=6.40 X-Spam-Score: 6.40 X-Rspamd-Queue-Id: E728B23D1F X-Spamd-Result: default: False [6.40 / 15.00]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; R_MISSING_CHARSET(2.50)[]; FREEMAIL_ENVRCPT(0.00)[gmail.com]; TAGGED_RCPT(0.00)[dt]; MIME_GOOD(-0.10)[text/plain]; BROKEN_CONTENT_TYPE(1.50)[]; TO_MATCH_ENVRCPT_ALL(0.00)[]; DKIM_SIGNED(0.00)[]; RCPT_COUNT_TWELVE(0.00)[24]; MID_CONTAINS_FROM(1.00)[]; NEURAL_HAM(-0.00)[-0.167]; RCVD_COUNT_ZERO(0.00)[0]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:31334, ipnet:2a02:810c:8000::/33, country:DE]; FREEMAIL_CC(0.00)[linaro.org,baylibre.com,kernel.org,suse.com,roeck-us.net,gmail.com,pengutronix.de,linux-watchdog.org,nxp.com,linutronix.de,lakedaemon.net,linuxfoundation.org,walle.cc]; SUSPICIOUS_RECIPS(1.50)[] X-Spam: Yes Sender: linux-hwmon-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org This patch adds core support for the board management controller found on the SMARC-sAL28 board. It consists of the following functions: - watchdog - GPIO controller - PWM controller - fan sensor - interrupt controller At the moment, this controller is used on the Kontron SMARC-sAL28 board. Please note that the MFD driver is defined as bool in the Kconfig because the next patch will add interrupt support. Signed-off-by: Michael Walle --- drivers/mfd/Kconfig | 19 +++++ drivers/mfd/Makefile | 2 + drivers/mfd/sl28cpld.c | 153 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 174 insertions(+) create mode 100644 drivers/mfd/sl28cpld.c diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 3c547ed575e6..7c6761161f7a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2059,5 +2059,24 @@ config SGI_MFD_IOC3 If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. +config MFD_SL28CPLD + bool "Kontron sl28 core driver" + depends on I2C=y + depends on OF + select REGMAP_I2C + select MFD_CORE + help + This option enables support for the board management controller + found on the Kontron sl28 CPLD. You have to select individual + functions, such as watchdog, GPIO, etc, under the corresponding menus + in order to enable them. + + Currently supported boards are: + + Kontron SMARC-sAL28 + + To compile this driver as a module, choose M here: the module will be + called sl28cpld. + endmenu endif diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f935d10cbf0f..9bc38863b9c7 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -259,3 +259,5 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o + +obj-$(CONFIG_MFD_SL28CPLD) += sl28cpld.o diff --git a/drivers/mfd/sl28cpld.c b/drivers/mfd/sl28cpld.c new file mode 100644 index 000000000000..1e5860cc7ffc --- /dev/null +++ b/drivers/mfd/sl28cpld.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MFD core for the sl28cpld. + * + * Copyright 2019 Kontron Europe GmbH + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SL28CPLD_VERSION 0x03 +#define SL28CPLD_WATCHDOG_BASE 0x04 +#define SL28CPLD_HWMON_FAN_BASE 0x0b +#define SL28CPLD_PWM0_BASE 0x0c +#define SL28CPLD_PWM1_BASE 0x0e +#define SL28CPLD_GPIO0_BASE 0x10 +#define SL28CPLD_GPIO1_BASE 0x15 +#define SL28CPLD_GPO_BASE 0x1a +#define SL28CPLD_GPI_BASE 0x1b +#define SL28CPLD_INTC_BASE 0x1c + +/* all subdevices share the same IRQ */ +#define SL28CPLD_IRQ 0 + +#define SL28CPLD_MIN_REQ_VERSION 14 + +struct sl28cpld { + struct device *dev; + struct regmap *regmap; +}; + +static const struct regmap_config sl28cpld_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .reg_stride = 1, +}; + +static struct resource sl28cpld_watchdog_resources[] = { + DEFINE_RES_REG(SL28CPLD_WATCHDOG_BASE, 1), +}; + +static struct resource sl28cpld_hwmon_fan_resources[] = { + DEFINE_RES_REG(SL28CPLD_HWMON_FAN_BASE, 1), +}; + +static struct resource sl28cpld_pwm0_resources[] = { + DEFINE_RES_REG(SL28CPLD_PWM0_BASE, 1), +}; + +static struct resource sl28cpld_pwm1_resources[] = { + DEFINE_RES_REG(SL28CPLD_PWM1_BASE, 1), +}; + +static struct resource sl28cpld_gpio0_resources[] = { + DEFINE_RES_REG(SL28CPLD_GPIO0_BASE, 1), + DEFINE_RES_IRQ(SL28CPLD_IRQ), +}; + +static struct resource sl28cpld_gpio1_resources[] = { + DEFINE_RES_REG(SL28CPLD_GPIO1_BASE, 1), + DEFINE_RES_IRQ(SL28CPLD_IRQ), +}; + +static struct resource sl28cpld_gpo_resources[] = { + DEFINE_RES_REG(SL28CPLD_GPO_BASE, 1), +}; + +static struct resource sl28cpld_gpi_resources[] = { + DEFINE_RES_REG(SL28CPLD_GPI_BASE, 1), +}; + +static struct resource sl28cpld_intc_resources[] = { + DEFINE_RES_REG(SL28CPLD_INTC_BASE, 1), + DEFINE_RES_IRQ(SL28CPLD_IRQ), +}; + +static const struct mfd_cell sl28cpld_devs[] = { + OF_MFD_CELL_REG("sl28cpld-wdt", sl28cpld_watchdog_resources, + NULL, 0, 0, "kontron,sl28cpld-wdt", 0), + OF_MFD_CELL_REG("sl28cpld-fan", sl28cpld_hwmon_fan_resources, + NULL, 0, 0, "kontron,sl28cpld-fan", 1), + OF_MFD_CELL_REG("sl28cpld-pwm", sl28cpld_pwm0_resources, + NULL, 0, 0, "kontron,sl28cpld-pwm", 2), + OF_MFD_CELL_REG("sl28cpld-pwm", sl28cpld_pwm1_resources, + NULL, 0, 1, "kontron,sl28cpld-pwm", 3), + OF_MFD_CELL_REG("sl28cpld-gpio", sl28cpld_gpio0_resources, + NULL, 0, 0, "kontron,sl28cpld-gpio", 4), + OF_MFD_CELL_REG("sl28cpld-gpio", sl28cpld_gpio1_resources, + NULL, 0, 1, "kontron,sl28cpld-gpio", 5), + OF_MFD_CELL_REG("sl28cpld-gpo", sl28cpld_gpo_resources, + NULL, 0, 0, "kontron,sl28cpld-gpo", 6), + OF_MFD_CELL_REG("sl28cpld-gpi", sl28cpld_gpi_resources, + NULL, 0, 0, "kontron,sl28cpld-gpi", 7), + MFD_CELL_RES("sl28cpld-intc", sl28cpld_intc_resources), +}; + +static int sl28cpld_probe(struct i2c_client *i2c) +{ + struct sl28cpld *sl28cpld; + struct device *dev = &i2c->dev; + unsigned int cpld_version; + int ret; + + sl28cpld = devm_kzalloc(dev, sizeof(*sl28cpld), GFP_KERNEL); + if (!sl28cpld) + return -ENOMEM; + + sl28cpld->regmap = devm_regmap_init_i2c(i2c, &sl28cpld_regmap_config); + if (IS_ERR(sl28cpld->regmap)) + return PTR_ERR(sl28cpld->regmap); + + ret = regmap_read(sl28cpld->regmap, SL28CPLD_VERSION, &cpld_version); + if (ret) + return ret; + + if (cpld_version < SL28CPLD_MIN_REQ_VERSION) { + dev_err(dev, "unsupported CPLD version %d\n", cpld_version); + return -ENODEV; + } + + sl28cpld->dev = dev; + i2c_set_clientdata(i2c, sl28cpld); + + dev_info(dev, "successfully probed. CPLD version %d\n", cpld_version); + + return devm_mfd_add_devices(dev, -1, sl28cpld_devs, + ARRAY_SIZE(sl28cpld_devs), NULL, + i2c->irq, NULL); +} + +static const struct of_device_id sl28cpld_of_match[] = { + { .compatible = "kontron,sl28cpld", }, + {} +}; +MODULE_DEVICE_TABLE(of, sl28cpld_of_match); + +static struct i2c_driver sl28cpld_driver = { + .probe_new = sl28cpld_probe, + .driver = { + .name = "sl28cpld", + .of_match_table = of_match_ptr(sl28cpld_of_match), + }, +}; +module_i2c_driver(sl28cpld_driver); + +MODULE_DESCRIPTION("sl28cpld MFD Core Driver"); +MODULE_AUTHOR("Michael Walle "); +MODULE_LICENSE("GPL");