diff mbox series

[1/3] dt-bindings: fsi: Add P10 OCC device documentation

Message ID 20200501150833.5251-2-eajames@linux.ibm.com
State Superseded
Headers show
Series occ: Add support for P10 | expand

Commit Message

Eddie James May 1, 2020, 3:08 p.m. UTC
Add the P10 compatible string.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Rob Herring May 12, 2020, 8:57 p.m. UTC | #1
On Fri,  1 May 2020 10:08:31 -0500, Eddie James wrote:
> Add the P10 compatible string.
> 
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
> ---
>  Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
index 99ca9862a586..e73358075a90 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
@@ -1,13 +1,13 @@ 
-Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC)
----------------------------------------------------------------------
+Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
+-----------------------------------------------------------------------------
 
-This is the binding for the P9 On-Chip Controller accessed over FSI from a
-service processor. See fsi.txt for details on bindings for FSI slave and CFAM
+This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
+a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
 nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE fifo.
+through the SBE FIFO.
 
 Required properties:
- - compatible = "ibm,p9-occ"
+ - compatible = "ibm,p9-occ" or "ibm,p10-occ"
 
 Examples: