diff mbox series

[v4,2/3] hwmon: add Documentation

Message ID 20200624072154.22486-3-mail@mariuszachmann.de (mailing list archive)
State Superseded
Headers show
Series hwmon: Add Corsair Commander Pro driver | expand

Commit Message

Marius Zachmann June 24, 2020, 7:21 a.m. UTC 
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
---
 Documentation/hwmon/corsair-cpro.rst | 40 ++++++++++++++++++++++++++++
 Documentation/hwmon/index.rst        |  1 +
 2 files changed, 41 insertions(+)
 create mode 100644 Documentation/hwmon/corsair-cpro.rst
diff mbox series

Patch

diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
new file mode 100644
index 000000000000..2383c6f72115
--- /dev/null
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -0,0 +1,40 @@ 
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-cpro
+==========================
+
+Supported devices:
+
+  * Corsair Commander Pro
+  * Corsair Commander Pro (1000D)
+
+Author: Marius Zachmann
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair Commander Pro.
+The Corsair Commander Pro is a USB device with 6 fan connectors,
+4 temperature sensor connectors and 2 Corsair LED connectors.
+It can read the voltage levels on the SATA power connector.
+
+Usage Notes
+-----------
+
+Since it is a USB device, hotswapping is possible. The device is autodetected.
+
+Sysfs entries
+-------------
+
+======================= =====================================================================
+in0_input		Voltage on SATA 12v
+in1_input		Voltage on SATA 5v
+in2_input		Voltage on SATA 3.3v
+temp[1-4]_input		Temperature on connected temperature sensors
+temp[1-4] label		Shows "nc" after name, when not connected
+fan[1-6]_input		Connected fan rpm.
+fan[1-6]_label		Shows connection status of the fan as detected by the device.
+pwm[1-6]		Sets the fan speed. Values from 0-255.
+			When reading, it reports the last value if it was set by the driver.
+			Otherwise returns 0.
+======================= =====================================================================
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index 55ff4b7c5349..750d3a975d82 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -47,6 +47,7 @@  Hardware Monitoring Kernel Drivers
    bel-pfe
    bt1-pvt
    coretemp
+   corsair-cpro
    da9052
    da9055
    dell-smm-hwmon