diff mbox series

[4/5] Documenation: hwmon/w83627ehf: drop duplicate words

Message ID 20200703205649.30125-5-rdunlap@infradead.org (mailing list archive)
State Accepted
Headers show
Series Documenation: hwmon: eliminate doubled words | expand

Commit Message

Randy Dunlap July 3, 2020, 8:56 p.m. UTC 
Drop the doubled word "and".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
---
 Documentation/hwmon/w83627ehf.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

--- linux-next-20200701.orig/Documentation/hwmon/w83627ehf.rst
+++ linux-next-20200701/Documentation/hwmon/w83627ehf.rst
@@ -96,7 +96,7 @@  sensors. The configured source for each
 in tempX_label.
 
 Temperatures are measured in degrees Celsius and measurement resolution is 1
-degC for temp1 and and 0.5 degC for temp2 and temp3. For temp4 and higher,
+degC for temp1 and 0.5 degC for temp2 and temp3. For temp4 and higher,
 resolution is 1 degC for W83667HG-B and 0.0 degC for NCT6775F and NCT6776F.
 An alarm is triggered when the temperature gets higher than high limit;
 it stays on until the temperature falls below the hysteresis value.