diff mbox series

[v4,2/2] devicetree: hwmon: shtc1: Add sensirion,shtc1.yaml

Message ID 20200708040748.9014-3-chris.ruehl@gtsys.com.hk (mailing list archive)
State Superseded
Headers show
Series shtc1: add support for device tree bindings | expand

Commit Message

Chris Ruehl July 8, 2020, 4:07 a.m. UTC
Add documentation for the newly added DTS support in the shtc1 driver.
To align with the drivers logic to have high precision by default
a boolean sensirion,low_precision is used to switch to low precision.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
 .../bindings/hwmon/sensirion,shtc1.yaml       | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml

Comments

Rob Herring (Arm) July 9, 2020, 4:46 p.m. UTC | #1
On Wed, 08 Jul 2020 12:07:47 +0800, Chris Ruehl wrote:
> Add documentation for the newly added DTS support in the shtc1 driver.
> To align with the drivers logic to have high precision by default
> a boolean sensirion,low_precision is used to switch to low precision.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
>  .../bindings/hwmon/sensirion,shtc1.yaml       | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Error: Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dts:26.13-14 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:315: recipe for target 'Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml' failed
make[1]: *** [Documentation/devicetree/bindings/hwmon/sensirion,shtc1.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
Makefile:1347: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1324936

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
Rob Herring (Arm) July 9, 2020, 4:51 p.m. UTC | #2
On Wed, Jul 08, 2020 at 12:07:47PM +0800, Chris Ruehl wrote:
> Add documentation for the newly added DTS support in the shtc1 driver.
> To align with the drivers logic to have high precision by default
> a boolean sensirion,low_precision is used to switch to low precision.
> 
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
>  .../bindings/hwmon/sensirion,shtc1.yaml       | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> new file mode 100644
> index 000000000000..6725a7b646b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
> @@ -0,0 +1,60 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sensirion SHTC1 Humidity and Temperature Sensor IC
> +
> +maintainers:
> +  - chris.ruehl@gtsys.com.hk
> +
> +description: |
> +  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
> +  designed especially for battery-driven high-volume consumer electronics
> +  applications.
> +  For further information refere to Documentation/hwmon/shtc1.rst
> +
> +  This binding document describes the binding for the hardware monitor
> +  portion of the driver.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - sensirion,shtc1
> +      - sensirion,shtw1
> +      - sensirion,shtc3
> +
> +  reg:
> +    maxItems: 1
> +    description: I2C address 0x70

If 0x70 is the only address, then do:

reg:
  const: 0x70

> +
> +  sensirion,blocking_io:

s/_/-/

> +    $ref: /schemas/types.yaml#definitions/flag
> +    description:
> +      If set the i2c bus hold until measure finished.
> +
> +  sensirion,low_precision:
> +    $ref: /schemas/types.yaml#definitions/flag

s/_/-/

> +    description:
> +      If set aquire data with low precision (not recommended).
> +      The driver aquire data with high precision by default.
> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    i2c1 {
> +      status = "okay";

Don't show status in examples.

> +      clock-frequency = <400000>;
> +
> +      shtc3@70 {
> +        compatible = "sensirion,shtc3";
> +        reg = <0x70>
> +        sensirion,blocking_io;
> +        status = "okay";
> +      };
> +    };
> +...
> -- 
> 2.20.1
>
Chris Ruehl July 10, 2020, 2:08 a.m. UTC | #3
Hi Rob,

On 10/7/2020 12:51 am, Rob Herring wrote:
> On Wed, Jul 08, 2020 at 12:07:47PM +0800, Chris Ruehl wrote:
>> Add documentation for the newly added DTS support in the shtc1 driver.
>> To align with the drivers logic to have high precision by default
> 
> If 0x70 is the only address, then do:
> 
> reg:
>    const: 0x70

yes, that make sense.

> 
>> +
>> +  sensirion,blocking_io:
> 
> s/_/-/

done!

>> +
>> +examples:
>> +  - |
>> +    i2c1 {
>> +      status = "okay";
> 
> Don't show status in examples.

Thanks for your advice.

updated and patch set v5 is out soon.

Chris
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
new file mode 100644
index 000000000000..6725a7b646b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -0,0 +1,60 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,shtc1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHTC1 Humidity and Temperature Sensor IC
+
+maintainers:
+  - chris.ruehl@gtsys.com.hk
+
+description: |
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  designed especially for battery-driven high-volume consumer electronics
+  applications.
+  For further information refere to Documentation/hwmon/shtc1.rst
+
+  This binding document describes the binding for the hardware monitor
+  portion of the driver.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,shtc1
+      - sensirion,shtw1
+      - sensirion,shtc3
+
+  reg:
+    maxItems: 1
+    description: I2C address 0x70
+
+  sensirion,blocking_io:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      If set the i2c bus hold until measure finished.
+
+  sensirion,low_precision:
+    $ref: /schemas/types.yaml#definitions/flag
+    description:
+      If set aquire data with low precision (not recommended).
+      The driver aquire data with high precision by default.
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c1 {
+      status = "okay";
+      clock-frequency = <400000>;
+
+      shtc3@70 {
+        compatible = "sensirion,shtc3";
+        reg = <0x70>
+        sensirion,blocking_io;
+        status = "okay";
+      };
+    };
+...