@@ -475,6 +475,7 @@ static int adm1275_probe(struct i2c_client *client,
const struct coefficients *coefficients;
int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
int tindex = -1;
+ bool temp1_en;
u32 shunt;
if (!i2c_check_functionality(client->adapter,
@@ -536,6 +537,9 @@ static int adm1275_probe(struct i2c_client *client,
if (shunt == 0)
return -EINVAL;
+ temp1_en = of_property_read_bool(client->dev.of_node, "adm1272-adm1278-temp1-en") &&
+ (mid->driver_data == adm1272 || mid->driver_data == adm1278);
+
data->id = mid->driver_data;
info = &data->info;
@@ -614,16 +618,18 @@ static int adm1275_probe(struct i2c_client *client,
info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ ret = config;
+ /* Enable temp if it is instructed by dt (it is disabled by default) */
+ if (temp1_en && !(config & ADM1278_TEMP1_EN))
+ config |= ADM1278_TEMP1_EN;
/* Enable VOUT if not enabled (it is disabled by default) */
- if (!(config & ADM1278_VOUT_EN)) {
+ if (!(config & ADM1278_VOUT_EN))
config |= ADM1278_VOUT_EN;
- ret = i2c_smbus_write_byte_data(client,
- ADM1275_PMON_CONFIG,
- config);
+ if (ret != config) {
+ ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, config);
if (ret < 0) {
- dev_err(&client->dev,
- "Failed to enable VOUT monitoring\n");
- return -ENODEV;
+ dev_err(&client->dev, "Failed to enable config control bits");
+ return ret;
}
}
@@ -685,16 +691,18 @@ static int adm1275_probe(struct i2c_client *client,
info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ ret = config;
+ /* Enable temp if it is instructed by dt (it is disabled by default) */
+ if (temp1_en && !(config & ADM1278_TEMP1_EN))
+ config |= ADM1278_TEMP1_EN;
/* Enable VOUT if not enabled (it is disabled by default) */
- if (!(config & ADM1278_VOUT_EN)) {
+ if (!(config & ADM1278_VOUT_EN))
config |= ADM1278_VOUT_EN;
- ret = i2c_smbus_write_byte_data(client,
- ADM1275_PMON_CONFIG,
- config);
+ if (ret != config) {
+ ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, config);
if (ret < 0) {
- dev_err(&client->dev,
- "Failed to enable VOUT monitoring\n");
- return -ENODEV;
+ dev_err(&client->dev, "Failed to enable config control bits");
+ return ret;
}
}
Problem: adm1272 and adm1278 supports temperature sampling. The current way of enabling it requires the user manually unbind the device from the driver, flip the temperature sampling control bit and then bind the device back to the driver. It would be nice if we can control this in a better way by reading the dt. Solution: Introducing device tree binding adm1272-adm1278-temp1-en. If the flag is set, flip the temp1_en control bit on probing. Testing: 1). iotools smbus_write16 35 0x10 0xd4 0x0037 // disable the temp1_en 2). recompile the dt to have adm1272-adm1278-temp1-en set 3). Probe the driver and make sure tempX shows up in hwmon Signed-off-by: Chu Lin <linchuyuan@google.com> --- drivers/hwmon/pmbus/adm1275.c | 36 +++++++++++++++++++++-------------- 1 file changed, 22 insertions(+), 14 deletions(-)