@@ -108,6 +108,50 @@ static bool check_succes(char command, char ret[SUCCES_LENGTH])
return strncmp(ret, success, SUCCES_LENGTH) == 0;
}
+int set_fan_rpm_curve(struct driver *cdev, struct fan_hwmon_data *fan_data,
+ struct curve_point point[7])
+{
+ int retval;
+ int wrote;
+ int sndpipe = usb_sndbulkpipe(cdev->udev, cdev->bulk_out_endpointAddr);
+ int rcvpipe = usb_rcvbulkpipe(cdev->udev, cdev->bulk_in_endpointAddr);
+
+ char *send_buf = cdev->bulk_out_buffer;
+ char *recv_buf = cdev->bulk_in_buffer;
+ memcpy(fan_data->curve, point, sizeof(fan_data->curve));
+
+ send_buf[0] = 0x40;
+ send_buf[1] = fan_data->fan_channel;
+ send_buf[2] = point[0].temp;
+ send_buf[3] = point[1].temp;
+ send_buf[4] = point[2].temp;
+ send_buf[5] = point[3].temp;
+ send_buf[6] = point[4].temp;
+ send_buf[7] = point[5].temp;
+ send_buf[8] = point[6].temp;
+ send_buf[9] = point[0].pwm;
+ send_buf[10] = point[1].pwm;
+ send_buf[11] = point[2].pwm;
+ send_buf[12] = point[3].pwm;
+ send_buf[13] = point[4].pwm;
+ send_buf[14] = point[5].pwm;
+ send_buf[15] = point[6].pwm;
+
+ retval = usb_bulk_msg(cdev->udev, sndpipe, send_buf, 16, &wrote, 100);
+ if (retval != 0)
+ return retval;
+
+ retval = usb_bulk_msg(cdev->udev, rcvpipe, recv_buf, 4, &wrote, 100);
+ if (retval != 0)
+ return retval;
+
+ if (!check_succes(
+ send_buf[0],
+ recv_buf) /* || recv_buf[3] != fan_data->fan_channel */)
+ printk(KERN_INFO "[*] Failled setting fan curve %d,%d,%d/%d\n",
+ recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
+ return 0;
+}
int set_fan_target_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
long val)
{
@@ -177,6 +221,40 @@ int get_fan_current_rpm(struct driver *cdev, struct fan_hwmon_data *fan_data,
return 0;
}
+int set_fan_target_pwm(struct driver *cdev, struct fan_hwmon_data *fan_data,
+ long val)
+{
+ int retval;
+ int wrote;
+ int sndpipe = usb_sndbulkpipe(cdev->udev, cdev->bulk_out_endpointAddr);
+ int rcvpipe = usb_rcvbulkpipe(cdev->udev, cdev->bulk_in_endpointAddr);
+
+ unsigned char *send_buf = cdev->bulk_out_buffer;
+ unsigned char *recv_buf = cdev->bulk_in_buffer;
+
+ fan_data->fan_pwm_target = val;
+ fan_data->fan_target = 0;
+
+ send_buf[0] = 0x42;
+ send_buf[1] = fan_data->fan_channel;
+ send_buf[3] = fan_data->fan_pwm_target;
+
+ retval = usb_bulk_msg(cdev->udev, sndpipe, send_buf, 4, &wrote, 100);
+ if (retval != 0)
+ return retval;
+
+ retval = usb_bulk_msg(cdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000);
+ if (retval != 0)
+ return retval;
+
+ //no error
+ if (!check_succes(send_buf[0], recv_buf) ||
+ recv_buf[3] != fan_data->fan_channel)
+ printk(KERN_INFO "[*] Failled setting fan pwm %d,%d,%d/%d\n",
+ recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]);
+ return 0;
+}
+
umode_t is_visible_func(const void *d, enum hwmon_sensor_types type, u32 attr,
int channel)
{
@@ -196,6 +274,19 @@ umode_t is_visible_func(const void *d, enum hwmon_sensor_types type, u32 attr,
break;
}
break;
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_input:
+ return 0200;
+ break;
+ case hwmon_pwm_mode:
+ return 0644;
+ break;
+ default:
+ break;
+ }
+ break;
+
default:
break;
}
@@ -214,7 +305,11 @@ static int write_func(struct device *dev, enum hwmon_sensor_types type,
case hwmon_fan:;
switch (attr) {
case hwmon_fan_target:
+
fan_data = data->channel_data[channel];
+ if (fan_data->mode != 1) {
+ return -EINVAL;
+ }
retval = usb_autopm_get_interface(cdev->interface);
if (retval)
@@ -229,11 +324,70 @@ static int write_func(struct device *dev, enum hwmon_sensor_types type,
if (retval)
goto cleanup;
- break;
+ goto exit;
default:
return -EINVAL;
}
- break;
+ goto exit;
+ case hwmon_pwm:;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ fan_data = data->channel_data[channel];
+ if (fan_data->mode != 1) {
+ return -EINVAL;
+ }
+
+ retval = usb_autopm_get_interface(cdev->interface);
+ if (retval)
+ goto exit;
+
+ if (down_trylock(&cdev->limit_sem)) {
+ retval = -EAGAIN;
+ goto cleanup_interface;
+ }
+
+ retval = set_fan_target_pwm(cdev, fan_data, val);
+ if (retval)
+ return retval;
+
+ goto cleanup;
+ case hwmon_pwm_mode:
+ fan_data = data->channel_data[channel];
+
+ retval = usb_autopm_get_interface(cdev->interface);
+ if (retval)
+ goto exit;
+
+ if (down_trylock(&cdev->limit_sem)) {
+ retval = -EAGAIN;
+ goto cleanup_interface;
+ }
+ fan_data->mode = val;
+
+ if (val == 0) {
+ set_fan_rpm_curve(cdev, fan_data,
+ default_curve);
+ } else if (val == 1) {
+ if (fan_data->fan_target != 0) {
+ retval = set_fan_target_rpm(
+ cdev, fan_data,
+ fan_data->fan_target);
+ if (retval)
+ goto cleanup;
+ } else if (fan_data->fan_pwm_target != 0) {
+ retval = set_fan_target_pwm(
+ cdev, fan_data,
+ fan_data->fan_pwm_target);
+ if (retval)
+ goto cleanup;
+ }
+ }
+ goto cleanup;
+ default:
+ return -EINVAL;
+ }
+ goto exit;
default:
return -EINVAL;
}
@@ -274,19 +428,36 @@ int read_func(struct device *dev, enum hwmon_sensor_types type, u32 attr,
if (retval)
goto cleanup;
- break;
+ goto cleanup;
case hwmon_fan_target:
fan_data = data->channel_data[channel];
+ if (fan_data->mode != 1) {
+ *val = 0;
+ goto exit;
+ }
get_fan_target_rpm(fan_data, val);
- break;
+ goto exit;
case hwmon_fan_min:
*val = 200;
- break;
+ goto exit;
+
default:
return -EINVAL;
}
- break;
+ goto exit;
+
+ case hwmon_pwm:
+ switch (attr) {
+ case hwmon_pwm_mode:
+ fan_data = data->channel_data[channel];
+ *val = fan_data->mode;
+ goto exit;
+ default:
+ return -EINVAL;
+ }
+ goto exit;
+
default:
return -EINVAL;
}
@@ -299,8 +470,11 @@ int read_func(struct device *dev, enum hwmon_sensor_types type, u32 attr,
return retval;
}
static const struct hwmon_channel_info *dual_fan[] = {
- HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET,
- HWMON_F_INPUT | HWMON_F_TARGET),
+ HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN),
+ HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_MODE,
+ HWMON_PWM_INPUT | HWMON_PWM_MODE),
+
NULL
};
Signed-off-by: Jaap Aarts <jaap.aarts1@example.com> --- drivers/hwmon/asetek_gen6.c | 190 ++++++++++++++++++++++++++++++++++-- 1 file changed, 182 insertions(+), 8 deletions(-)