new file mode 100644
@@ -0,0 +1,37 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver adm1266
+=====================
+
+Supported chips:
+ * Analog Devices ADM1266
+ Prefix: 'adm1266'
+ Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1266.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Analog Devices ADM1266 sequencer.
+
+ADM1266 is a sequencer that features voltage readback from 17 channels via an
+integrated 12 bit SAR ADC, accessed using a PMBus interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write, history reset
+attributes are write-only, all other attributes are read-only.
+
+inX_label "voutx"
+inX_input Measured voltage.
+inX_min Minimum Voltage.
+inX_max Maximum voltage.
+inX_min_alarm Voltage low alarm.
+inX_max_alarm Voltage high alarm.
@@ -30,6 +30,7 @@ Hardware Monitoring Kernel Drivers
adm1026
adm1031
adm1177
+ adm1266
adm1275
adm9240
ads7828
@@ -26,6 +26,15 @@ config SENSORS_PMBUS
This driver can also be built as a module. If so, the module will
be called pmbus.
+config SENSORS_ADM1266
+ tristate "Analog Devices ADM1266 Sequencer"
+ help
+ If you say yes here you get hardware monitoring support for Analog
+ Devices ADM1266 Cascadable Super Sequencer.
+
+ This driver can also be built as a module. If so, the module will
+ be called adm1266.
+
config SENSORS_ADM1275
tristate "Analog Devices ADM1275 and compatibles"
help
@@ -5,6 +5,7 @@
obj-$(CONFIG_PMBUS) += pmbus_core.o
obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o
+obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o
obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o
obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o
obj-$(CONFIG_SENSORS_IBM_CFFPS) += ibm-cffps.o
new file mode 100644
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+#include <linux/slab.h>
+
+struct adm1266_data {
+ struct pmbus_driver_info info;
+ struct i2c_client *client;
+};
+
+static int adm1266_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct adm1266_data *data;
+ int i;
+
+ data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ data->info.pages = 17;
+ data->info.format[PSC_VOLTAGE_OUT] = linear;
+ for (i = 0; i < data->info.pages; i++)
+ data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+ return pmbus_do_probe(client, id, &data->info);
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+ { .compatible = "adi,adm1266" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static const struct i2c_device_id adm1266_id[] = {
+ { "adm1266", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static struct i2c_driver adm1266_driver = {
+ .driver = {
+ .name = "adm1266",
+ .of_match_table = adm1266_of_match,
+ },
+ .probe = adm1266_probe,
+ .remove = pmbus_do_remove,
+ .id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");