diff mbox series

[v2] hwmon: add driver for NZXT Kraken X42/X52/X62/X72

Message ID 20210319045544.416138-1-jonas@protocubo.io (mailing list archive)
State Accepted
Headers show
Series [v2] hwmon: add driver for NZXT Kraken X42/X52/X62/X72 | expand

Commit Message

Jonas Malaco March 19, 2021, 4:55 a.m. UTC
These are "all-in-one" CPU liquid coolers that can be monitored and
controlled through a proprietary USB HID protocol.

While the models have differently sized radiators and come with varying
numbers of fans, they are all indistinguishable at the software level.

The driver exposes fan/pump speeds and coolant temperature through the
standard hwmon sysfs interface.

Fan and pump control, while supported by the devices, are not currently
exposed.  The firmware accepts up to 61 trip points per channel
(fan/pump), but the same set of trip temperatures has to be maintained
for both; with pwmX_auto_point_Y_temp attributes, users would need to
maintain this invariant themselves.

Instead, fan and pump control, as well as LED control (which the device
also supports for 9 addressable RGB LEDs on the CPU water block) are
left for existing and already mature user-space tools, which can still
be used alongside the driver, thanks to hidraw.  A link to one, which I
also maintain, is provided in the documentation.

The implementation is based on USB traffic analysis.  It has been
runtime tested on x86_64, both as a built-in driver and as a module.

Signed-off-by: Jonas Malaco <jonas@protocubo.io>
---
Changes in v2:
- remove unnecessary type, attr and channel checks from _is_visible
- remove unnecessary attr and channel checks from _read/_read_string
- remove the spinlock by computing values in the event handler
- add comment describing how the device reports data
- report missing or stale data to user-space
- adjust copyright notice

 Documentation/hwmon/index.rst        |   1 +
 Documentation/hwmon/nzxt-kraken2.rst |  42 +++++
 MAINTAINERS                          |   7 +
 drivers/hwmon/Kconfig                |  10 ++
 drivers/hwmon/Makefile               |   1 +
 drivers/hwmon/nzxt-kraken2.c         | 235 +++++++++++++++++++++++++++
 6 files changed, 296 insertions(+)
 create mode 100644 Documentation/hwmon/nzxt-kraken2.rst
 create mode 100644 drivers/hwmon/nzxt-kraken2.c


base-commit: c37e19c3791abf5814fa63fc081bd2fa2d7d9258

Comments

Guenter Roeck March 19, 2021, 9:26 p.m. UTC | #1
On Fri, Mar 19, 2021 at 01:55:44AM -0300, Jonas Malaco wrote:
> These are "all-in-one" CPU liquid coolers that can be monitored and
> controlled through a proprietary USB HID protocol.
> 
> While the models have differently sized radiators and come with varying
> numbers of fans, they are all indistinguishable at the software level.
> 
> The driver exposes fan/pump speeds and coolant temperature through the
> standard hwmon sysfs interface.
> 
> Fan and pump control, while supported by the devices, are not currently
> exposed.  The firmware accepts up to 61 trip points per channel
> (fan/pump), but the same set of trip temperatures has to be maintained
> for both; with pwmX_auto_point_Y_temp attributes, users would need to
> maintain this invariant themselves.
> 
> Instead, fan and pump control, as well as LED control (which the device
> also supports for 9 addressable RGB LEDs on the CPU water block) are
> left for existing and already mature user-space tools, which can still
> be used alongside the driver, thanks to hidraw.  A link to one, which I
> also maintain, is provided in the documentation.
> 
> The implementation is based on USB traffic analysis.  It has been
> runtime tested on x86_64, both as a built-in driver and as a module.
> 
> Signed-off-by: Jonas Malaco <jonas@protocubo.io>

Applied (after removing the now unnecessary spinlock.h include).

Thanks,
Guenter
Jonas Malaco March 20, 2021, 6:29 a.m. UTC | #2
On Fri, Mar 19, 2021 at 02:26:40PM -0700, Guenter Roeck wrote:
> On Fri, Mar 19, 2021 at 01:55:44AM -0300, Jonas Malaco wrote:
> > These are "all-in-one" CPU liquid coolers that can be monitored and
> > controlled through a proprietary USB HID protocol.
> > 
> > While the models have differently sized radiators and come with varying
> > numbers of fans, they are all indistinguishable at the software level.
> > 
> > The driver exposes fan/pump speeds and coolant temperature through the
> > standard hwmon sysfs interface.
> > 
> > Fan and pump control, while supported by the devices, are not currently
> > exposed.  The firmware accepts up to 61 trip points per channel
> > (fan/pump), but the same set of trip temperatures has to be maintained
> > for both; with pwmX_auto_point_Y_temp attributes, users would need to
> > maintain this invariant themselves.
> > 
> > Instead, fan and pump control, as well as LED control (which the device
> > also supports for 9 addressable RGB LEDs on the CPU water block) are
> > left for existing and already mature user-space tools, which can still
> > be used alongside the driver, thanks to hidraw.  A link to one, which I
> > also maintain, is provided in the documentation.
> > 
> > The implementation is based on USB traffic analysis.  It has been
> > runtime tested on x86_64, both as a built-in driver and as a module.
> > 
> > Signed-off-by: Jonas Malaco <jonas@protocubo.io>
> 
> Applied (after removing the now unnecessary spinlock.h include).

Thanks for catching/fixing that.

Jonas

> 
> Thanks,
> Guenter
diff mbox series

Patch

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index d4b422edbe3a..48bfa7887dd4 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -143,6 +143,7 @@  Hardware Monitoring Kernel Drivers
    npcm750-pwm-fan
    nsa320
    ntc_thermistor
+   nzxt-kraken2
    occ
    pc87360
    pc87427
diff --git a/Documentation/hwmon/nzxt-kraken2.rst b/Documentation/hwmon/nzxt-kraken2.rst
new file mode 100644
index 000000000000..94025de65a81
--- /dev/null
+++ b/Documentation/hwmon/nzxt-kraken2.rst
@@ -0,0 +1,42 @@ 
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken2
+==========================
+
+Supported devices:
+
+* NZXT Kraken X42
+* NZXT Kraken X52
+* NZXT Kraken X62
+* NZXT Kraken X72
+
+Author: Jonas Malaco
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X42/X52/X62/X72
+all-in-one CPU liquid coolers.  Three sensors are available: fan speed, pump
+speed and coolant temperature.
+
+Fan and pump control, while supported by the firmware, are not currently
+exposed.  The addressable RGB LEDs, present in the integrated CPU water block
+and pump head, are not supported either.  But both features can be found in
+existing user-space tools (e.g. `liquidctl`_).
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+=======================	========================================================
+fan1_input		Fan speed (in rpm)
+fan2_input		Pump speed (in rpm)
+temp1_input		Coolant temperature (in millidegrees Celsius)
+=======================	========================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 0635b30e467c..b8f9fc5eaf08 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12911,6 +12911,13 @@  L:	linux-nfc@lists.01.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/nfc/nxp-nci
 
+NZXT-KRAKEN2 HARDWARE MONITORING DRIVER
+M:	Jonas Malaco <jonas@protocubo.io>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/nzxt-kraken2.rst
+F:	drivers/hwmon/nzxt-kraken2.c
+
 OBJAGG
 M:	Jiri Pirko <jiri@nvidia.com>
 L:	netdev@vger.kernel.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 54f04e61fb83..0ddc974b102e 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1492,6 +1492,16 @@  config SENSORS_NSA320
 	  This driver can also be built as a module. If so, the module
 	  will be called nsa320-hwmon.
 
+config SENSORS_NZXT_KRAKEN2
+	tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
+	depends on USB_HID
+	help
+	  If you say yes here you get support for hardware monitoring for the
+	  NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nzxt-kraken2.
+
 source "drivers/hwmon/occ/Kconfig"
 
 config SENSORS_PCF8591
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index fe38e8a5c979..59e78bc212cf 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -155,6 +155,7 @@  obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
 obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
 obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
+obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
diff --git a/drivers/hwmon/nzxt-kraken2.c b/drivers/hwmon/nzxt-kraken2.c
new file mode 100644
index 000000000000..a04892301a2c
--- /dev/null
+++ b/drivers/hwmon/nzxt-kraken2.c
@@ -0,0 +1,235 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * nzxt-kraken2.c - hwmon driver for NZXT Kraken X42/X52/X62/X72 coolers
+ *
+ * The device asynchronously sends HID reports (with id 0x04) twice a second to
+ * communicate current fan speed, pump speed and coolant temperature.  The
+ * device does not respond to Get_Report requests for this status report.
+ *
+ * Copyright 2019-2021  Jonas Malaco <jonas@protocubo.io>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/hid.h>
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#define STATUS_REPORT_ID	0x04
+#define STATUS_VALIDITY		2 /* seconds; equivalent to 4 missed updates */
+
+static const char *const kraken2_temp_label[] = {
+	"Coolant",
+};
+
+static const char *const kraken2_fan_label[] = {
+	"Fan",
+	"Pump",
+};
+
+struct kraken2_priv_data {
+	struct hid_device *hid_dev;
+	struct device *hwmon_dev;
+	s32 temp_input[1];
+	u16 fan_input[2];
+	unsigned long updated; /* jiffies */
+};
+
+static umode_t kraken2_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	return 0444;
+}
+
+static int kraken2_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct kraken2_priv_data *priv = dev_get_drvdata(dev);
+
+	if (time_after(jiffies, priv->updated + STATUS_VALIDITY * HZ))
+		return -ENODATA;
+
+	switch (type) {
+	case hwmon_temp:
+		*val = priv->temp_input[channel];
+		break;
+	case hwmon_fan:
+		*val = priv->fan_input[channel];
+		break;
+	default:
+		return -EOPNOTSUPP; /* unreachable */
+	}
+
+	return 0;
+}
+
+static int kraken2_read_string(struct device *dev, enum hwmon_sensor_types type,
+			       u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_temp:
+		*str = kraken2_temp_label[channel];
+		break;
+	case hwmon_fan:
+		*str = kraken2_fan_label[channel];
+		break;
+	default:
+		return -EOPNOTSUPP; /* unreachable */
+	}
+	return 0;
+}
+
+static const struct hwmon_ops kraken2_hwmon_ops = {
+	.is_visible = kraken2_is_visible,
+	.read = kraken2_read,
+	.read_string = kraken2_read_string,
+};
+
+static const struct hwmon_channel_info *kraken2_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL),
+	NULL
+};
+
+static const struct hwmon_chip_info kraken2_chip_info = {
+	.ops = &kraken2_hwmon_ops,
+	.info = kraken2_info,
+};
+
+static int kraken2_raw_event(struct hid_device *hdev,
+			     struct hid_report *report, u8 *data, int size)
+{
+	struct kraken2_priv_data *priv;
+
+	if (size < 7 || report->id != STATUS_REPORT_ID)
+		return 0;
+
+	priv = hid_get_drvdata(hdev);
+
+	/*
+	 * The fractional byte of the coolant temperature has been observed to
+	 * be in the interval [1,9], but some of these steps are also
+	 * consistently skipped for certain integer parts.
+	 *
+	 * For the lack of a better idea, assume that the resolution is 0.1°C,
+	 * and that the missing steps are artifacts of how the firmware
+	 * processes the raw sensor data.
+	 */
+	priv->temp_input[0] = data[1] * 1000 + data[2] * 100;
+
+	priv->fan_input[0] = get_unaligned_be16(data + 3);
+	priv->fan_input[1] = get_unaligned_be16(data + 5);
+
+	priv->updated = jiffies;
+
+	return 0;
+}
+
+static int kraken2_probe(struct hid_device *hdev,
+			 const struct hid_device_id *id)
+{
+	struct kraken2_priv_data *priv;
+	int ret;
+
+	priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->hid_dev = hdev;
+	hid_set_drvdata(hdev, priv);
+
+	/*
+	 * Initialize ->updated to STATUS_VALIDITY seconds in the past, making
+	 * the initial empty data invalid for kraken2_read without the need for
+	 * a special case there.
+	 */
+	priv->updated = jiffies - STATUS_VALIDITY * HZ;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "hid parse failed with %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Enable hidraw so existing user-space tools can continue to work.
+	 */
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret) {
+		hid_err(hdev, "hid hw start failed with %d\n", ret);
+		goto fail_and_stop;
+	}
+
+	ret = hid_hw_open(hdev);
+	if (ret) {
+		hid_err(hdev, "hid hw open failed with %d\n", ret);
+		goto fail_and_close;
+	}
+
+	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "kraken2",
+							  priv, &kraken2_chip_info,
+							  NULL);
+	if (IS_ERR(priv->hwmon_dev)) {
+		ret = PTR_ERR(priv->hwmon_dev);
+		hid_err(hdev, "hwmon registration failed with %d\n", ret);
+		goto fail_and_close;
+	}
+
+	return 0;
+
+fail_and_close:
+	hid_hw_close(hdev);
+fail_and_stop:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static void kraken2_remove(struct hid_device *hdev)
+{
+	struct kraken2_priv_data *priv = hid_get_drvdata(hdev);
+
+	hwmon_device_unregister(priv->hwmon_dev);
+
+	hid_hw_close(hdev);
+	hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id kraken2_table[] = {
+	{ HID_USB_DEVICE(0x1e71, 0x170e) }, /* NZXT Kraken X42/X52/X62/X72 */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, kraken2_table);
+
+static struct hid_driver kraken2_driver = {
+	.name = "nzxt-kraken2",
+	.id_table = kraken2_table,
+	.probe = kraken2_probe,
+	.remove = kraken2_remove,
+	.raw_event = kraken2_raw_event,
+};
+
+static int __init kraken2_init(void)
+{
+	return hid_register_driver(&kraken2_driver);
+}
+
+static void __exit kraken2_exit(void)
+{
+	hid_unregister_driver(&kraken2_driver);
+}
+
+/*
+ * When compiled into the kernel, initialize after the hid bus.
+ */
+late_initcall(kraken2_init);
+module_exit(kraken2_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Malaco <jonas@protocubo.io>");
+MODULE_DESCRIPTION("Hwmon driver for NZXT Kraken X42/X52/X62/X72 coolers");