| Message ID | 20210803113134.2262882-7-iwona.winiarska@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Introduce PECI subsystem | expand |
On Tue, Aug 3, 2021 at 4:35 AM Iwona Winiarska <iwona.winiarska@intel.com> wrote: > > Intel processors provide access for various services designed to support > processor and DRAM thermal management, platform manageability and > processor interface tuning and diagnostics. > Those services are available via the Platform Environment Control > Interface (PECI) that provides a communication channel between the > processor and the Baseboard Management Controller (BMC) or other > platform management device. > > This change introduces PECI subsystem by adding the initial core module > and API for controller drivers. > > Co-developed-by: Jason M Bills <jason.m.bills@linux.intel.com> > Signed-off-by: Jason M Bills <jason.m.bills@linux.intel.com> > Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > --- > MAINTAINERS | 9 +++ > drivers/Kconfig | 3 + > drivers/Makefile | 1 + > drivers/peci/Kconfig | 15 ++++ > drivers/peci/Makefile | 5 ++ > drivers/peci/core.c | 155 ++++++++++++++++++++++++++++++++++++++++ > drivers/peci/internal.h | 16 +++++ > include/linux/peci.h | 99 +++++++++++++++++++++++++ > 8 files changed, 303 insertions(+) > create mode 100644 drivers/peci/Kconfig > create mode 100644 drivers/peci/Makefile > create mode 100644 drivers/peci/core.c > create mode 100644 drivers/peci/internal.h > create mode 100644 include/linux/peci.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 7cdab7229651..d411974aaa5e 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -14503,6 +14503,15 @@ L: platform-driver-x86@vger.kernel.org > S: Maintained > F: drivers/platform/x86/peaq-wmi.c > > +PECI SUBSYSTEM > +M: Iwona Winiarska <iwona.winiarska@intel.com> > +R: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > +L: openbmc@lists.ozlabs.org (moderated for non-subscribers) > +S: Supported > +F: Documentation/devicetree/bindings/peci/ > +F: drivers/peci/ > +F: include/linux/peci.h > + > PENSANDO ETHERNET DRIVERS > M: Shannon Nelson <snelson@pensando.io> > M: drivers@pensando.io > diff --git a/drivers/Kconfig b/drivers/Kconfig > index 8bad63417a50..f472b3d972b3 100644 > --- a/drivers/Kconfig > +++ b/drivers/Kconfig > @@ -236,4 +236,7 @@ source "drivers/interconnect/Kconfig" > source "drivers/counter/Kconfig" > > source "drivers/most/Kconfig" > + > +source "drivers/peci/Kconfig" > + > endmenu > diff --git a/drivers/Makefile b/drivers/Makefile > index 27c018bdf4de..8d96f0c3dde5 100644 > --- a/drivers/Makefile > +++ b/drivers/Makefile > @@ -189,3 +189,4 @@ obj-$(CONFIG_GNSS) += gnss/ > obj-$(CONFIG_INTERCONNECT) += interconnect/ > obj-$(CONFIG_COUNTER) += counter/ > obj-$(CONFIG_MOST) += most/ > +obj-$(CONFIG_PECI) += peci/ > diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig > new file mode 100644 > index 000000000000..71a4ad81225a > --- /dev/null > +++ b/drivers/peci/Kconfig > @@ -0,0 +1,15 @@ > +# SPDX-License-Identifier: GPL-2.0-only > + > +menuconfig PECI > + tristate "PECI support" > + help > + The Platform Environment Control Interface (PECI) is an interface > + that provides a communication channel to Intel processors and > + chipset components from external monitoring or control devices. > + > + If you are building a Baseboard Management Controller (BMC) kernel > + for Intel platform say Y here and also to the specific driver for > + your adapter(s) below. If unsure say N. > + > + This support is also available as a module. If so, the module > + will be called peci. > diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile > new file mode 100644 > index 000000000000..e789a354e842 > --- /dev/null > +++ b/drivers/peci/Makefile > @@ -0,0 +1,5 @@ > +# SPDX-License-Identifier: GPL-2.0-only > + > +# Core functionality > +peci-y := core.o > +obj-$(CONFIG_PECI) += peci.o > diff --git a/drivers/peci/core.c b/drivers/peci/core.c > new file mode 100644 > index 000000000000..7b3938af0396 > --- /dev/null > +++ b/drivers/peci/core.c > @@ -0,0 +1,155 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +// Copyright (c) 2018-2021 Intel Corporation > + > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt This looks like overkill for only one print statement in this module, especially when the dev_ print helpers offer more detail. > + > +#include <linux/bug.h> > +#include <linux/device.h> > +#include <linux/export.h> > +#include <linux/idr.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/peci.h> > +#include <linux/pm_runtime.h> > +#include <linux/property.h> > +#include <linux/slab.h> > + > +#include "internal.h" > + > +static DEFINE_IDA(peci_controller_ida); > + > +static void peci_controller_dev_release(struct device *dev) > +{ > + struct peci_controller *controller = to_peci_controller(dev); > + > + pm_runtime_disable(&controller->dev); This seems late to be disabling power management, the device is about to be freed. Keep in mind the lifetime of the this object can be artificially prolonged. I expect this to be done when the device is unregistered from the bus. > + > + mutex_destroy(&controller->bus_lock); > + ida_free(&peci_controller_ida, controller->id); > + fwnode_handle_put(controller->dev.fwnode); Shouldn't the get / put of this handle reference be bound to specific accesses not held for the entire lifetime of the object? At a minimum it seems to be a reference that can taken at registration and dropped at unregistration. > + kfree(controller); > +} > + > +struct device_type peci_controller_type = { > + .release = peci_controller_dev_release, > +}; > + > +static struct peci_controller *peci_controller_alloc(struct device *dev, > + struct peci_controller_ops *ops) > +{ > + struct fwnode_handle *node = fwnode_handle_get(dev_fwnode(dev)); > + struct peci_controller *controller; > + int ret; > + > + if (!ops->xfer) > + return ERR_PTR(-EINVAL); > + > + controller = kzalloc(sizeof(*controller), GFP_KERNEL); > + if (!controller) > + return ERR_PTR(-ENOMEM); > + > + ret = ida_alloc_max(&peci_controller_ida, U8_MAX, GFP_KERNEL); > + if (ret < 0) > + goto err; > + controller->id = ret; > + > + controller->ops = ops; > + > + controller->dev.parent = dev; > + controller->dev.bus = &peci_bus_type; > + controller->dev.type = &peci_controller_type; > + controller->dev.fwnode = node; > + controller->dev.of_node = to_of_node(node); > + > + device_initialize(&controller->dev); > + > + mutex_init(&controller->bus_lock); > + > + pm_runtime_no_callbacks(&controller->dev); > + pm_suspend_ignore_children(&controller->dev, true); > + pm_runtime_enable(&controller->dev); Per above, are you sure unregistered devices need pm_runtime enabled? Rest looks ok to me.
On Wed, 2021-08-25 at 15:58 -0700, Dan Williams wrote: > On Tue, Aug 3, 2021 at 4:35 AM Iwona Winiarska > <iwona.winiarska@intel.com> wrote: > > > > Intel processors provide access for various services designed to support > > processor and DRAM thermal management, platform manageability and > > processor interface tuning and diagnostics. > > Those services are available via the Platform Environment Control > > Interface (PECI) that provides a communication channel between the > > processor and the Baseboard Management Controller (BMC) or other > > platform management device. > > > > This change introduces PECI subsystem by adding the initial core module > > and API for controller drivers. > > > > Co-developed-by: Jason M Bills <jason.m.bills@linux.intel.com> > > Signed-off-by: Jason M Bills <jason.m.bills@linux.intel.com> > > Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > > Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > > Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> > > Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> > > --- > > MAINTAINERS | 9 +++ > > drivers/Kconfig | 3 + > > drivers/Makefile | 1 + > > drivers/peci/Kconfig | 15 ++++ > > drivers/peci/Makefile | 5 ++ > > drivers/peci/core.c | 155 ++++++++++++++++++++++++++++++++++++++++ > > drivers/peci/internal.h | 16 +++++ > > include/linux/peci.h | 99 +++++++++++++++++++++++++ > > 8 files changed, 303 insertions(+) > > create mode 100644 drivers/peci/Kconfig > > create mode 100644 drivers/peci/Makefile > > create mode 100644 drivers/peci/core.c > > create mode 100644 drivers/peci/internal.h > > create mode 100644 include/linux/peci.h > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 7cdab7229651..d411974aaa5e 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -14503,6 +14503,15 @@ L: platform-driver-x86@vger.kernel.org > > S: Maintained > > F: drivers/platform/x86/peaq-wmi.c > > > > +PECI SUBSYSTEM > > +M: Iwona Winiarska <iwona.winiarska@intel.com> > > +R: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> > > +L: openbmc@lists.ozlabs.org (moderated for non-subscribers) > > +S: Supported > > +F: Documentation/devicetree/bindings/peci/ > > +F: drivers/peci/ > > +F: include/linux/peci.h > > + > > PENSANDO ETHERNET DRIVERS > > M: Shannon Nelson <snelson@pensando.io> > > M: drivers@pensando.io > > diff --git a/drivers/Kconfig b/drivers/Kconfig > > index 8bad63417a50..f472b3d972b3 100644 > > --- a/drivers/Kconfig > > +++ b/drivers/Kconfig > > @@ -236,4 +236,7 @@ source "drivers/interconnect/Kconfig" > > source "drivers/counter/Kconfig" > > > > source "drivers/most/Kconfig" > > + > > +source "drivers/peci/Kconfig" > > + > > endmenu > > diff --git a/drivers/Makefile b/drivers/Makefile > > index 27c018bdf4de..8d96f0c3dde5 100644 > > --- a/drivers/Makefile > > +++ b/drivers/Makefile > > @@ -189,3 +189,4 @@ obj-$(CONFIG_GNSS) += gnss/ > > obj-$(CONFIG_INTERCONNECT) += interconnect/ > > obj-$(CONFIG_COUNTER) += counter/ > > obj-$(CONFIG_MOST) += most/ > > +obj-$(CONFIG_PECI) += peci/ > > diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig > > new file mode 100644 > > index 000000000000..71a4ad81225a > > --- /dev/null > > +++ b/drivers/peci/Kconfig > > @@ -0,0 +1,15 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > + > > +menuconfig PECI > > + tristate "PECI support" > > + help > > + The Platform Environment Control Interface (PECI) is an interface > > + that provides a communication channel to Intel processors and > > + chipset components from external monitoring or control devices. > > + > > + If you are building a Baseboard Management Controller (BMC) kernel > > + for Intel platform say Y here and also to the specific driver for > > + your adapter(s) below. If unsure say N. > > + > > + This support is also available as a module. If so, the module > > + will be called peci. > > diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile > > new file mode 100644 > > index 000000000000..e789a354e842 > > --- /dev/null > > +++ b/drivers/peci/Makefile > > @@ -0,0 +1,5 @@ > > +# SPDX-License-Identifier: GPL-2.0-only > > + > > +# Core functionality > > +peci-y := core.o > > +obj-$(CONFIG_PECI) += peci.o > > diff --git a/drivers/peci/core.c b/drivers/peci/core.c > > new file mode 100644 > > index 000000000000..7b3938af0396 > > --- /dev/null > > +++ b/drivers/peci/core.c > > @@ -0,0 +1,155 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +// Copyright (c) 2018-2021 Intel Corporation > > + > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > This looks like overkill for only one print statement in this module, > especially when the dev_ print helpers offer more detail. Ok, I'll remove it. > > > + > > +#include <linux/bug.h> > > +#include <linux/device.h> > > +#include <linux/export.h> > > +#include <linux/idr.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/peci.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/property.h> > > +#include <linux/slab.h> > > + > > +#include "internal.h" > > + > > +static DEFINE_IDA(peci_controller_ida); > > + > > +static void peci_controller_dev_release(struct device *dev) > > +{ > > + struct peci_controller *controller = to_peci_controller(dev); > > + > > + pm_runtime_disable(&controller->dev); > > This seems late to be disabling power management, the device is about > to be freed. Keep in mind the lifetime of the this object can be > artificially prolonged. I expect this to be done when the device is > unregistered from the bus. Makes sense. > > > + > > + mutex_destroy(&controller->bus_lock); > > + ida_free(&peci_controller_ida, controller->id); > > + fwnode_handle_put(controller->dev.fwnode); > > Shouldn't the get / put of this handle reference be bound to specific > accesses not held for the entire lifetime of the object? At a minimum > it seems to be a reference that can taken at registration and dropped > at unregistration. I'll move it to take ref at registration and to drop it at unregistration. > > > + kfree(controller); > > +} > > + > > +struct device_type peci_controller_type = { > > + .release = peci_controller_dev_release, > > +}; > > + > > +static struct peci_controller *peci_controller_alloc(struct device *dev, > > + struct > > peci_controller_ops *ops) > > +{ > > + struct fwnode_handle *node = fwnode_handle_get(dev_fwnode(dev)); > > + struct peci_controller *controller; > > + int ret; > > + > > + if (!ops->xfer) > > + return ERR_PTR(-EINVAL); > > + > > + controller = kzalloc(sizeof(*controller), GFP_KERNEL); > > + if (!controller) > > + return ERR_PTR(-ENOMEM); > > + > > + ret = ida_alloc_max(&peci_controller_ida, U8_MAX, GFP_KERNEL); > > + if (ret < 0) > > + goto err; > > + controller->id = ret; > > + > > + controller->ops = ops; > > + > > + controller->dev.parent = dev; > > + controller->dev.bus = &peci_bus_type; > > + controller->dev.type = &peci_controller_type; > > + controller->dev.fwnode = node; > > + controller->dev.of_node = to_of_node(node); > > + > > + device_initialize(&controller->dev); > > + > > + mutex_init(&controller->bus_lock); > > + > > + pm_runtime_no_callbacks(&controller->dev); > > + pm_suspend_ignore_children(&controller->dev, true); > > + pm_runtime_enable(&controller->dev); > > Per above, are you sure unregistered devices need pm_runtime enabled? > > Rest looks ok to me. Thanks -Iwona
diff --git a/MAINTAINERS b/MAINTAINERS index 7cdab7229651..d411974aaa5e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14503,6 +14503,15 @@ L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/peaq-wmi.c +PECI SUBSYSTEM +M: Iwona Winiarska <iwona.winiarska@intel.com> +R: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> +L: openbmc@lists.ozlabs.org (moderated for non-subscribers) +S: Supported +F: Documentation/devicetree/bindings/peci/ +F: drivers/peci/ +F: include/linux/peci.h + PENSANDO ETHERNET DRIVERS M: Shannon Nelson <snelson@pensando.io> M: drivers@pensando.io diff --git a/drivers/Kconfig b/drivers/Kconfig index 8bad63417a50..f472b3d972b3 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -236,4 +236,7 @@ source "drivers/interconnect/Kconfig" source "drivers/counter/Kconfig" source "drivers/most/Kconfig" + +source "drivers/peci/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 27c018bdf4de..8d96f0c3dde5 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -189,3 +189,4 @@ obj-$(CONFIG_GNSS) += gnss/ obj-$(CONFIG_INTERCONNECT) += interconnect/ obj-$(CONFIG_COUNTER) += counter/ obj-$(CONFIG_MOST) += most/ +obj-$(CONFIG_PECI) += peci/ diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig new file mode 100644 index 000000000000..71a4ad81225a --- /dev/null +++ b/drivers/peci/Kconfig @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only + +menuconfig PECI + tristate "PECI support" + help + The Platform Environment Control Interface (PECI) is an interface + that provides a communication channel to Intel processors and + chipset components from external monitoring or control devices. + + If you are building a Baseboard Management Controller (BMC) kernel + for Intel platform say Y here and also to the specific driver for + your adapter(s) below. If unsure say N. + + This support is also available as a module. If so, the module + will be called peci. diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile new file mode 100644 index 000000000000..e789a354e842 --- /dev/null +++ b/drivers/peci/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only + +# Core functionality +peci-y := core.o +obj-$(CONFIG_PECI) += peci.o diff --git a/drivers/peci/core.c b/drivers/peci/core.c new file mode 100644 index 000000000000..7b3938af0396 --- /dev/null +++ b/drivers/peci/core.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (c) 2018-2021 Intel Corporation + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/export.h> +#include <linux/idr.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/peci.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/slab.h> + +#include "internal.h" + +static DEFINE_IDA(peci_controller_ida); + +static void peci_controller_dev_release(struct device *dev) +{ + struct peci_controller *controller = to_peci_controller(dev); + + pm_runtime_disable(&controller->dev); + + mutex_destroy(&controller->bus_lock); + ida_free(&peci_controller_ida, controller->id); + fwnode_handle_put(controller->dev.fwnode); + kfree(controller); +} + +struct device_type peci_controller_type = { + .release = peci_controller_dev_release, +}; + +static struct peci_controller *peci_controller_alloc(struct device *dev, + struct peci_controller_ops *ops) +{ + struct fwnode_handle *node = fwnode_handle_get(dev_fwnode(dev)); + struct peci_controller *controller; + int ret; + + if (!ops->xfer) + return ERR_PTR(-EINVAL); + + controller = kzalloc(sizeof(*controller), GFP_KERNEL); + if (!controller) + return ERR_PTR(-ENOMEM); + + ret = ida_alloc_max(&peci_controller_ida, U8_MAX, GFP_KERNEL); + if (ret < 0) + goto err; + controller->id = ret; + + controller->ops = ops; + + controller->dev.parent = dev; + controller->dev.bus = &peci_bus_type; + controller->dev.type = &peci_controller_type; + controller->dev.fwnode = node; + controller->dev.of_node = to_of_node(node); + + device_initialize(&controller->dev); + + mutex_init(&controller->bus_lock); + + pm_runtime_no_callbacks(&controller->dev); + pm_suspend_ignore_children(&controller->dev, true); + pm_runtime_enable(&controller->dev); + + return controller; + +err: + kfree(controller); + return ERR_PTR(ret); +} + +static void unregister_controller(void *_controller) +{ + struct peci_controller *controller = _controller; + + device_unregister(&controller->dev); +} + +/** + * devm_peci_controller_add() - add PECI controller + * @dev: device for devm operations + * @ops: pointer to controller specific methods + * + * In final stage of its probe(), peci_controller driver calls + * devm_peci_controller_add() to register itself with the PECI bus. + * + * Return: Pointer to the newly allocated controller or ERR_PTR() in case of failure. + */ +struct peci_controller *devm_peci_controller_add(struct device *dev, + struct peci_controller_ops *ops) +{ + struct peci_controller *controller; + int ret; + + controller = peci_controller_alloc(dev, ops); + if (IS_ERR(controller)) + return controller; + + ret = dev_set_name(&controller->dev, "peci-%d", controller->id); + if (ret) + goto err; + + ret = device_add(&controller->dev); + if (ret) + goto err; + + ret = devm_add_action_or_reset(dev, unregister_controller, controller); + if (ret) + return ERR_PTR(ret); + + return controller; + +err: + put_device(&controller->dev); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL_NS_GPL(devm_peci_controller_add, PECI); + +struct bus_type peci_bus_type = { + .name = "peci", +}; + +static int __init peci_init(void) +{ + int ret; + + ret = bus_register(&peci_bus_type); + if (ret < 0) { + pr_err("failed to register PECI bus type!\n"); + return ret; + } + + return 0; +} +module_init(peci_init); + +static void __exit peci_exit(void) +{ + bus_unregister(&peci_bus_type); +} +module_exit(peci_exit); + +MODULE_AUTHOR("Jason M Bills <jason.m.bills@linux.intel.com>"); +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>"); +MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>"); +MODULE_DESCRIPTION("PECI bus core module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h new file mode 100644 index 000000000000..918dea745a86 --- /dev/null +++ b/drivers/peci/internal.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2018-2021 Intel Corporation */ + +#ifndef __PECI_INTERNAL_H +#define __PECI_INTERNAL_H + +#include <linux/device.h> +#include <linux/types.h> + +struct peci_controller; + +extern struct bus_type peci_bus_type; + +extern struct device_type peci_controller_type; + +#endif /* __PECI_INTERNAL_H */ diff --git a/include/linux/peci.h b/include/linux/peci.h new file mode 100644 index 000000000000..26e0a4e73b50 --- /dev/null +++ b/include/linux/peci.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2018-2021 Intel Corporation */ + +#ifndef __LINUX_PECI_H +#define __LINUX_PECI_H + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/types.h> + +/* + * Currently we don't support any PECI command over 32 bytes. + */ +#define PECI_REQUEST_MAX_BUF_SIZE 32 + +struct peci_controller; +struct peci_request; + +/** + * struct peci_controller_ops - PECI controller specific methods + * @xfer: PECI transfer function + * + * PECI controllers may have different hardware interfaces - the drivers + * implementing PECI controllers can use this structure to abstract away those + * differences by exposing a common interface for PECI core. + */ +struct peci_controller_ops { + int (*xfer)(struct peci_controller *controller, u8 addr, struct peci_request *req); +}; + +/** + * struct peci_controller - PECI controller + * @dev: device object to register PECI controller to the device model + * @ops: pointer to device specific controller operations + * @bus_lock: lock used to protect multiple callers + * @id: PECI controller ID + * + * PECI controllers usually connect to their drivers using non-PECI bus, + * such as the platform bus. + * Each PECI controller can communicate with one or more PECI devices. + */ +struct peci_controller { + struct device dev; + struct peci_controller_ops *ops; + struct mutex bus_lock; /* held for the duration of xfer */ + u8 id; +}; + +struct peci_controller *devm_peci_controller_add(struct device *parent, + struct peci_controller_ops *ops); + +static inline struct peci_controller *to_peci_controller(void *d) +{ + return container_of(d, struct peci_controller, dev); +} + +/** + * struct peci_device - PECI device + * @dev: device object to register PECI device to the device model + * @controller: manages the bus segment hosting this PECI device + * @addr: address used on the PECI bus connected to the parent controller + * + * A peci_device identifies a single device (i.e. CPU) connected to a PECI bus. + * The behaviour exposed to the rest of the system is defined by the PECI driver + * managing the device. + */ +struct peci_device { + struct device dev; + u8 addr; +}; + +static inline struct peci_device *to_peci_device(struct device *d) +{ + return container_of(d, struct peci_device, dev); +} + +/** + * struct peci_request - PECI request + * @device: PECI device to which the request is sent + * @tx: TX buffer specific data + * @tx.buf: TX buffer + * @tx.len: transfer data length in bytes + * @rx: RX buffer specific data + * @rx.buf: RX buffer + * @rx.len: received data length in bytes + * + * A peci_request represents a request issued by PECI originator (TX) and + * a response received from PECI responder (RX). + */ +struct peci_request { + struct peci_device *device; + struct { + u8 buf[PECI_REQUEST_MAX_BUF_SIZE]; + u8 len; + } rx, tx; +}; + +#endif /* __LINUX_PECI_H */