diff mbox series

[5/6] hwmon: (k10temp): Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU

Message ID 20210826184057.26428-6-mario.limonciello@amd.com (mailing list archive)
State Accepted
Headers show
Series Add k10temp support for more client APUs | expand

Commit Message

Mario Limonciello Aug. 26, 2021, 6:40 p.m. UTC 
Tdie is an offset calculation that should only be shown when temp_offset
is actually put into a table.  This is useless to show for all CPU/APU.
Show it only when necessary.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/hwmon/k10temp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 41d9c0c0a1f1..e8ec0e36fc3b 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -435,7 +435,6 @@  static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
 		data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
 		data->read_tempreg = read_tempreg_nb_zen;
-		data->show_temp |= BIT(TDIE_BIT);	/* show Tdie */
 		data->is_zen = true;
 
 		switch (boot_cpu_data.x86_model) {
@@ -457,7 +456,6 @@  static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	} else if (boot_cpu_data.x86 == 0x19) {
 		data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
 		data->read_tempreg = read_tempreg_nb_zen;
-		data->show_temp |= BIT(TDIE_BIT);
 		data->is_zen = true;
 
 		switch (boot_cpu_data.x86_model) {
@@ -478,6 +476,7 @@  static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 		if (boot_cpu_data.x86 == entry->model &&
 		    strstr(boot_cpu_data.x86_model_id, entry->id)) {
+			data->show_temp |= BIT(TDIE_BIT);	/* show Tdie */
 			data->temp_offset = entry->offset;
 			break;
 		}