@@ -3,18 +3,21 @@
Kernel driver oxp-sensors
=========================
-Author:
+Authors:
+ - Derek John Clark <derekjohn.clark@gmail.com>
- Joaquín Ignacio Aramendía <samsagax@gmail.com>
-Description:
+Description
------------
-One X Player devices from One Netbook provide fan readings and fan control
-through its Embedded Controller.
+Handheld devices from One Netbook and Aya Neo provide fan readings and fan
+control through their embedded controllers.
-Currently only supports AMD boards from the One X Player and AOK ZOE lineup.
-Intel boards could be supported if we could figure out the EC registers and
-values to write to since the EC layout and model is different.
+Currently only supports AMD boards from One X Player, AOK ZOE, and some Aya
+Neo devices. One X PLayer Intel boards could be supported if we could figure
+out the EC registers and values to write to since the EC layout and model is
+different. Aya Neo devices preceding the AIR may not be usable as the EC model
+is different and do not appear to have manual control capabiltities.
Supported devices
-----------------
@@ -22,6 +25,8 @@ Supported devices
Currently the driver supports the following handhelds:
- AOK ZOE A1
+ - Aya Neo AIR
+ - Aya Neo AIR Pro
- OneXPlayer AMD
- OneXPlayer mini AMD
- OneXPlayer mini AMD PRO
@@ -15346,6 +15346,7 @@ F: drivers/mtd/nand/onenand/
F: include/linux/mtd/onenand*.h
ONEXPLAYER FAN DRIVER
+M: Derek John Clark <derekjohn.clark@gmail.com>
M: Joaquín Ignacio Aramendía <samsagax@gmail.com>
L: linux-hwmon@vger.kernel.org
S: Maintained
@@ -1,12 +1,12 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Platform driver for OXP Handhelds that expose fan reading and control
- * via hwmon sysfs.
+ * Platform driver for Handhelds that expose fan reading and control via
+ * hwmon sysfs.
*
- * Old boards have the same DMI strings and they are told appart by the
- * boot cpu vendor (Intel/AMD). Currently only AMD boards are supported
- * but the code is made to be simple to add other handheld boards in the
- * future.
+ * Old OXP boards have the same DMI strings and they are told appart by
+ * the boot cpu vendor (Intel/AMD). Currently only AMD boards are
+ * supported but the code is made to be simple to add other handheld
+ * boards in the future.
* Fan control is provided via pwm interface in the range [0-255].
* Old AMD boards use [0-100] as range in the EC, the written value is
* scaled to accommodate for that. Newer boards like the mini PRO and
@@ -42,6 +42,8 @@ static bool unlock_global_acpi_lock(void)
enum oxp_board {
aok_zoe_a1 = 1,
+ aya_neo_air,
+ aya_neo_air_pro,
oxp_mini_amd,
oxp_mini_amd_pro,
};
@@ -60,6 +62,20 @@ static const struct dmi_system_id dmi_table[] = {
},
.driver_data = (void *) &(enum oxp_board) {aok_zoe_a1},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "AIR"),
+ },
+ .driver_data = (void *) &(enum oxp_board) {aya_neo_air},
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "AIR Pro"),
+ },
+ .driver_data = (void *) &(enum oxp_board) {aya_neo_air_pro},
+ },
{
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ONE-NETBOOK"),
@@ -161,8 +177,19 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type,
ret = read_from_ec(OXP_SENSOR_PWM_REG, 1, val);
if (ret)
return ret;
- if (board == oxp_mini_amd)
+ switch (board) {
+ case aok_zoe_a1:
+ break;
+ case aya_neo_air:
+ case aya_neo_air_pro:
+ case oxp_mini_amd:
*val = (*val * 255) / 100;
+ break;
+ case oxp_mini_amd_pro:
+ break;
+ default:
+ break;
+ }
return 0;
case hwmon_pwm_enable:
return read_from_ec(OXP_SENSOR_PWM_ENABLE_REG, 1, val);
@@ -191,8 +218,19 @@ static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
case hwmon_pwm_input:
if (val < 0 || val > 255)
return -EINVAL;
- if (board == oxp_mini_amd)
+ switch (board) {
+ case aok_zoe_a1:
+ break;
+ case aya_neo_air:
+ case aya_neo_air_pro:
+ case oxp_mini_amd:
val = (val * 100) / 255;
+ break;
+ case oxp_mini_amd_pro:
+ break;
+ default:
+ break;
+ }
return write_to_ec(dev, OXP_SENSOR_PWM_REG, val);
default:
break;
Add support for the AYANEO AIR and AYANEO AIR Pro models of handheld devices. These devices use the same EC registers and logic as the One X Player mini AMD. Previous AYANEO models are not supported as they use a different EC and do not have the necessary fan speed write enable and setting registers. Tihe driver is tested on Aya Neo AIR while AIR Pro model EC functionality and DMI data were verified using command line tools by another user. The added devices are: - AYANEO AIR (AMD 5560U) - AYANEO AIR Pro (AMD 5560U) - AYANEO AIR Pro (AMD 5825U) Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> --- Documentation/hwmon/oxp-sensors.rst | 19 ++++++---- MAINTAINERS | 1 + drivers/hwmon/oxp-sensors.c | 54 ++++++++++++++++++++++++----- 3 files changed, 59 insertions(+), 15 deletions(-)