diff mbox series

[5/6] hwmon: (aquacomputer_d5next) Make fan sensor offsets u16

Message ID 20221218113131.3752-6-leonard.anderweit@gmail.com (mailing list archive)
State Accepted
Headers show
Series hwmon: (aquacomputer_d5next) Add Aquacomputer Aquaero sensors | expand

Commit Message

Leonard Anderweit Dec. 18, 2022, 11:31 a.m. UTC 
Make fan sensor offsets u16 as u8 is insufficient for upcoming devices.

Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
---
 drivers/hwmon/aquacomputer_d5next.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index cc53231067f4..d28d7079917a 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -83,7 +83,7 @@  static u8 secondary_ctrl_report[] = {
 #define D5NEXT_5V_VOLTAGE		0x39
 #define D5NEXT_12V_VOLTAGE		0x37
 #define D5NEXT_VIRTUAL_SENSORS_START	0x3f
-static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
+static u16 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
 
 /* Control report offsets for the D5 Next pump */
 #define D5NEXT_TEMP_CTRL_OFFSET		0x2D	/* Temperature sensor offsets location */
@@ -115,7 +115,7 @@  static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };	/* Pump and fan speed (fr
 #define OCTO_POWER_CYCLES		0x18
 #define OCTO_SENSOR_START		0x3D
 #define OCTO_VIRTUAL_SENSORS_START	0x45
-static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
+static u16 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
 
 /* Control report offsets for the Octo */
 #define OCTO_TEMP_CTRL_OFFSET		0xA
@@ -134,7 +134,7 @@  static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0
 #define QUADRO_SENSOR_START		0x34
 #define QUADRO_VIRTUAL_SENSORS_START	0x3c
 #define QUADRO_FLOW_SENSOR_OFFSET	0x6e
-static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
+static u16 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
 
 /* Control report offsets for the Quadro */
 #define QUADRO_TEMP_CTRL_OFFSET		0xA
@@ -313,7 +313,7 @@  struct aqc_data {
 	int checksum_offset;
 
 	int num_fans;
-	u8 *fan_sensor_offsets;
+	u16 *fan_sensor_offsets;
 	u16 *fan_ctrl_offsets;
 	int num_temp_sensors;
 	int temp_sensor_start_offset;