diff mbox series

[v2,2/3] hwmon: (ftsteutates) Replace fanX_source with pwmX_auto_channels_temp

Message ID 20230105225107.58308-3-W_Armin@gmx.de (mailing list archive)
State Accepted
Headers show
Series (ftsteutates) Various fixes | expand

Commit Message

Armin Wolf Jan. 5, 2023, 10:51 p.m. UTC
Replace the nonstandard fanX_source attributes with the standardized
pwmX_auto_channels_temp attributes and document the special behaviour
associated with those attributes.

Tested on a Fujitsu DS3401-B1.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
---
 Documentation/hwmon/ftsteutates.rst |  5 ++
 drivers/hwmon/ftsteutates.c         | 77 +++++++++++------------------
 2 files changed, 33 insertions(+), 49 deletions(-)

--
2.30.2

Comments

Guenter Roeck Jan. 15, 2023, 4:23 p.m. UTC | #1
On Thu, Jan 05, 2023 at 11:51:06PM +0100, Armin Wolf wrote:
> Replace the nonstandard fanX_source attributes with the standardized
> pwmX_auto_channels_temp attributes and document the special behaviour
> associated with those attributes.
> 
> Tested on a Fujitsu DS3401-B1.
> 
> Signed-off-by: Armin Wolf <W_Armin@gmx.de>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  Documentation/hwmon/ftsteutates.rst |  5 ++
>  drivers/hwmon/ftsteutates.c         | 77 +++++++++++------------------
>  2 files changed, 33 insertions(+), 49 deletions(-)
> 
> --
> 2.30.2
> 
> diff --git a/Documentation/hwmon/ftsteutates.rst b/Documentation/hwmon/ftsteutates.rst
> index 198fa8e2819d..b3bfec36661d 100644
> --- a/Documentation/hwmon/ftsteutates.rst
> +++ b/Documentation/hwmon/ftsteutates.rst
> @@ -22,6 +22,11 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
>  8 fans. It also contains an integrated watchdog which is currently
>  implemented in this driver.
> 
> +The ``pwmX_auto_channels_temp`` attributes show which temperature sensor
> +is currently driving which fan channel. This value might dynamically change
> +during runtime depending on the temperature sensor selected by
> +the fan control circuit.
> +
>  The 4 voltages require a board-specific multiplier, since the BMC can
>  only measure voltages up to 3.3V and thus relies on voltage dividers.
>  Consult your motherboard manual for details.
> diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c
> index 23dc3a74f84b..0d8ab94250a9 100644
> --- a/drivers/hwmon/ftsteutates.c
> +++ b/drivers/hwmon/ftsteutates.c
> @@ -6,9 +6,7 @@
>   *		  Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
>   */
>  #include <linux/err.h>
> -#include <linux/fs.h>
>  #include <linux/hwmon.h>
> -#include <linux/hwmon-sysfs.h>
>  #include <linux/i2c.h>
>  #include <linux/init.h>
>  #include <linux/jiffies.h>
> @@ -16,7 +14,6 @@
>  #include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/slab.h>
> -#include <linux/sysfs.h>
>  #include <linux/watchdog.h>
> 
>  #define FTS_DEVICE_ID_REG		0x0000
> @@ -48,6 +45,8 @@
>  #define FTS_NO_TEMP_SENSORS		0x10
>  #define FTS_NO_VOLT_SENSORS		0x04
> 
> +#define FTS_FAN_SOURCE_INVALID		0xff
> +
>  static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
> 
>  static const struct i2c_device_id fts_id[] = {
> @@ -187,7 +186,7 @@ static int fts_update_device(struct fts_data *data)
>  			data->fan_source[i] = err;
>  		} else {
>  			data->fan_input[i] = 0;
> -			data->fan_source[i] = 0;
> +			data->fan_source[i] = FTS_FAN_SOURCE_INVALID;
>  		}
>  	}
> 
> @@ -339,50 +338,6 @@ static int fts_watchdog_init(struct fts_data *data)
>  	return devm_watchdog_register_device(&data->client->dev, &data->wdd);
>  }
> 
> -static ssize_t fan_source_show(struct device *dev,
> -			       struct device_attribute *devattr, char *buf)
> -{
> -	struct fts_data *data = dev_get_drvdata(dev);
> -	int index = to_sensor_dev_attr(devattr)->index;
> -	int err;
> -
> -	err = fts_update_device(data);
> -	if (err < 0)
> -		return err;
> -
> -	return sprintf(buf, "%u\n", data->fan_source[index]);
> -}
> -
> -static SENSOR_DEVICE_ATTR_RO(fan1_source, fan_source, 0);
> -static SENSOR_DEVICE_ATTR_RO(fan2_source, fan_source, 1);
> -static SENSOR_DEVICE_ATTR_RO(fan3_source, fan_source, 2);
> -static SENSOR_DEVICE_ATTR_RO(fan4_source, fan_source, 3);
> -static SENSOR_DEVICE_ATTR_RO(fan5_source, fan_source, 4);
> -static SENSOR_DEVICE_ATTR_RO(fan6_source, fan_source, 5);
> -static SENSOR_DEVICE_ATTR_RO(fan7_source, fan_source, 6);
> -static SENSOR_DEVICE_ATTR_RO(fan8_source, fan_source, 7);
> -
> -static struct attribute *fts_fan_attrs[] = {
> -	&sensor_dev_attr_fan1_source.dev_attr.attr,
> -	&sensor_dev_attr_fan2_source.dev_attr.attr,
> -	&sensor_dev_attr_fan3_source.dev_attr.attr,
> -	&sensor_dev_attr_fan4_source.dev_attr.attr,
> -	&sensor_dev_attr_fan5_source.dev_attr.attr,
> -	&sensor_dev_attr_fan6_source.dev_attr.attr,
> -	&sensor_dev_attr_fan7_source.dev_attr.attr,
> -	&sensor_dev_attr_fan8_source.dev_attr.attr,
> -	NULL
> -};
> -
> -static const struct attribute_group fts_attr_group = {
> -	.attrs = fts_fan_attrs
> -};
> -
> -static const struct attribute_group *fts_attr_groups[] = {
> -	&fts_attr_group,
> -	NULL
> -};
> -
>  static umode_t fts_is_visible(const void *devdata, enum hwmon_sensor_types type, u32 attr,
>  			      int channel)
>  {
> @@ -408,6 +363,7 @@ static umode_t fts_is_visible(const void *devdata, enum hwmon_sensor_types type,
>  			break;
>  		}
>  		break;
> +	case hwmon_pwm:
>  	case hwmon_in:
>  		return 0444;
>  	default:
> @@ -460,6 +416,19 @@ static int fts_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>  			break;
>  		}
>  		break;
> +	case hwmon_pwm:
> +		switch (attr) {
> +		case hwmon_pwm_auto_channels_temp:
> +			if (data->fan_source[channel] == FTS_FAN_SOURCE_INVALID)
> +				*val = 0;
> +			else
> +				*val = BIT(data->fan_source[channel]);
> +
> +			return 0;
> +		default:
> +			break;
> +		}
> +		break;
>  	case hwmon_in:
>  		switch (attr) {
>  		case hwmon_in_input:
> @@ -576,6 +545,16 @@ static const struct hwmon_channel_info *fts_info[] = {
>  			   HWMON_F_INPUT | HWMON_F_ALARM,
>  			   HWMON_F_INPUT | HWMON_F_ALARM
>  			   ),
> +	HWMON_CHANNEL_INFO(pwm,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP,
> +			   HWMON_PWM_AUTO_CHANNELS_TEMP
> +			   ),
>  	HWMON_CHANNEL_INFO(in,
>  			   HWMON_I_INPUT,
>  			   HWMON_I_INPUT,
> @@ -672,7 +651,7 @@ static int fts_probe(struct i2c_client *client)
>  	revision = err;
> 
>  	hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, "ftsteutates", data,
> -							 &fts_chip_info, fts_attr_groups);
> +							 &fts_chip_info, NULL);
>  	if (IS_ERR(hwmon_dev))
>  		return PTR_ERR(hwmon_dev);
diff mbox series

Patch

diff --git a/Documentation/hwmon/ftsteutates.rst b/Documentation/hwmon/ftsteutates.rst
index 198fa8e2819d..b3bfec36661d 100644
--- a/Documentation/hwmon/ftsteutates.rst
+++ b/Documentation/hwmon/ftsteutates.rst
@@ -22,6 +22,11 @@  enhancements. It can monitor up to 4 voltages, 16 temperatures and
 8 fans. It also contains an integrated watchdog which is currently
 implemented in this driver.

+The ``pwmX_auto_channels_temp`` attributes show which temperature sensor
+is currently driving which fan channel. This value might dynamically change
+during runtime depending on the temperature sensor selected by
+the fan control circuit.
+
 The 4 voltages require a board-specific multiplier, since the BMC can
 only measure voltages up to 3.3V and thus relies on voltage dividers.
 Consult your motherboard manual for details.
diff --git a/drivers/hwmon/ftsteutates.c b/drivers/hwmon/ftsteutates.c
index 23dc3a74f84b..0d8ab94250a9 100644
--- a/drivers/hwmon/ftsteutates.c
+++ b/drivers/hwmon/ftsteutates.c
@@ -6,9 +6,7 @@ 
  *		  Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
  */
 #include <linux/err.h>
-#include <linux/fs.h>
 #include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/jiffies.h>
@@ -16,7 +14,6 @@ 
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
-#include <linux/sysfs.h>
 #include <linux/watchdog.h>

 #define FTS_DEVICE_ID_REG		0x0000
@@ -48,6 +45,8 @@ 
 #define FTS_NO_TEMP_SENSORS		0x10
 #define FTS_NO_VOLT_SENSORS		0x04

+#define FTS_FAN_SOURCE_INVALID		0xff
+
 static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };

 static const struct i2c_device_id fts_id[] = {
@@ -187,7 +186,7 @@  static int fts_update_device(struct fts_data *data)
 			data->fan_source[i] = err;
 		} else {
 			data->fan_input[i] = 0;
-			data->fan_source[i] = 0;
+			data->fan_source[i] = FTS_FAN_SOURCE_INVALID;
 		}
 	}

@@ -339,50 +338,6 @@  static int fts_watchdog_init(struct fts_data *data)
 	return devm_watchdog_register_device(&data->client->dev, &data->wdd);
 }

-static ssize_t fan_source_show(struct device *dev,
-			       struct device_attribute *devattr, char *buf)
-{
-	struct fts_data *data = dev_get_drvdata(dev);
-	int index = to_sensor_dev_attr(devattr)->index;
-	int err;
-
-	err = fts_update_device(data);
-	if (err < 0)
-		return err;
-
-	return sprintf(buf, "%u\n", data->fan_source[index]);
-}
-
-static SENSOR_DEVICE_ATTR_RO(fan1_source, fan_source, 0);
-static SENSOR_DEVICE_ATTR_RO(fan2_source, fan_source, 1);
-static SENSOR_DEVICE_ATTR_RO(fan3_source, fan_source, 2);
-static SENSOR_DEVICE_ATTR_RO(fan4_source, fan_source, 3);
-static SENSOR_DEVICE_ATTR_RO(fan5_source, fan_source, 4);
-static SENSOR_DEVICE_ATTR_RO(fan6_source, fan_source, 5);
-static SENSOR_DEVICE_ATTR_RO(fan7_source, fan_source, 6);
-static SENSOR_DEVICE_ATTR_RO(fan8_source, fan_source, 7);
-
-static struct attribute *fts_fan_attrs[] = {
-	&sensor_dev_attr_fan1_source.dev_attr.attr,
-	&sensor_dev_attr_fan2_source.dev_attr.attr,
-	&sensor_dev_attr_fan3_source.dev_attr.attr,
-	&sensor_dev_attr_fan4_source.dev_attr.attr,
-	&sensor_dev_attr_fan5_source.dev_attr.attr,
-	&sensor_dev_attr_fan6_source.dev_attr.attr,
-	&sensor_dev_attr_fan7_source.dev_attr.attr,
-	&sensor_dev_attr_fan8_source.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group fts_attr_group = {
-	.attrs = fts_fan_attrs
-};
-
-static const struct attribute_group *fts_attr_groups[] = {
-	&fts_attr_group,
-	NULL
-};
-
 static umode_t fts_is_visible(const void *devdata, enum hwmon_sensor_types type, u32 attr,
 			      int channel)
 {
@@ -408,6 +363,7 @@  static umode_t fts_is_visible(const void *devdata, enum hwmon_sensor_types type,
 			break;
 		}
 		break;
+	case hwmon_pwm:
 	case hwmon_in:
 		return 0444;
 	default:
@@ -460,6 +416,19 @@  static int fts_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 			break;
 		}
 		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_auto_channels_temp:
+			if (data->fan_source[channel] == FTS_FAN_SOURCE_INVALID)
+				*val = 0;
+			else
+				*val = BIT(data->fan_source[channel]);
+
+			return 0;
+		default:
+			break;
+		}
+		break;
 	case hwmon_in:
 		switch (attr) {
 		case hwmon_in_input:
@@ -576,6 +545,16 @@  static const struct hwmon_channel_info *fts_info[] = {
 			   HWMON_F_INPUT | HWMON_F_ALARM,
 			   HWMON_F_INPUT | HWMON_F_ALARM
 			   ),
+	HWMON_CHANNEL_INFO(pwm,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP,
+			   HWMON_PWM_AUTO_CHANNELS_TEMP
+			   ),
 	HWMON_CHANNEL_INFO(in,
 			   HWMON_I_INPUT,
 			   HWMON_I_INPUT,
@@ -672,7 +651,7 @@  static int fts_probe(struct i2c_client *client)
 	revision = err;

 	hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, "ftsteutates", data,
-							 &fts_chip_info, fts_attr_groups);
+							 &fts_chip_info, NULL);
 	if (IS_ERR(hwmon_dev))
 		return PTR_ERR(hwmon_dev);