| Message ID | 20230227090312.91091-1-erik@kryo.se (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | hwmon: (nct6775) ASUS PRIME Z590 boards support | expand |
On Mon, Feb 27, 2023 at 10:03:11AM +0100, Erik Ekman wrote: > Tested on Z590M-PLUS. > > dmesg log: > nct6775: Found NCT6798D or compatible chip at 0x2e:0x290 > > sensors output: > nct6798-isa-0290 > Adapter: ISA adapter > in0: 672.00 mV (min = +0.00 V, max = +1.74 V) > in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in2: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM > in3: 3.28 V (min = +0.00 V, max = +0.00 V) ALARM > in4: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM > in5: 808.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in6: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in7: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM > in8: 3.20 V (min = +0.00 V, max = +0.00 V) ALARM > in9: 528.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in10: 672.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in11: 528.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in12: 1.21 V (min = +0.00 V, max = +0.00 V) ALARM > in13: 992.00 mV (min = +0.00 V, max = +0.00 V) ALARM > in14: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM > fan1: 971 RPM (min = 0 RPM) > fan2: 1525 RPM (min = 0 RPM) > fan3: 0 RPM (min = 0 RPM) > fan4: 1094 RPM (min = 0 RPM) > fan5: 0 RPM (min = 0 RPM) > fan6: 0 RPM (min = 0 RPM) > fan7: 0 RPM (min = 0 RPM) > SYSTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > CPUTIN: +40.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor > AUXTIN0: +26.0°C sensor = thermistor > AUXTIN1: +8.0°C sensor = thermistor > AUXTIN2: +22.0°C sensor = thermistor > AUXTIN3: +25.0°C sensor = thermistor > PECI Agent 0 Calibration: +40.0°C > PCH_CHIP_CPU_MAX_TEMP: +0.0°C > PCH_CHIP_TEMP: +55.0°C > PCH_CPU_TEMP: +0.0°C > intrusion0: OK > intrusion1: ALARM > beep_enable: disabled > > Signed-off-by: Erik Ekman <erik@kryo.se> Applied. Thanks, Guenter > --- > drivers/hwmon/nct6775-platform.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c > index 76c6b564d7fc..1a00f4a542fe 100644 > --- a/drivers/hwmon/nct6775-platform.c > +++ b/drivers/hwmon/nct6775-platform.c > @@ -1122,6 +1122,9 @@ static const char * const asus_msi_boards[] = { > "PRIME X670-P", > "PRIME X670-P WIFI", > "PRIME X670E-PRO WIFI", > + "PRIME Z590-A", > + "PRIME Z590-P", > + "PRIME Z590M-PLUS", > "Pro B660M-C-D4", > "ProArt B660-CREATOR D4", > "ProArt X670E-CREATOR WIFI",
diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c index 76c6b564d7fc..1a00f4a542fe 100644 --- a/drivers/hwmon/nct6775-platform.c +++ b/drivers/hwmon/nct6775-platform.c @@ -1122,6 +1122,9 @@ static const char * const asus_msi_boards[] = { "PRIME X670-P", "PRIME X670-P WIFI", "PRIME X670E-PRO WIFI", + "PRIME Z590-A", + "PRIME Z590-P", + "PRIME Z590M-PLUS", "Pro B660M-C-D4", "ProArt B660-CREATOR D4", "ProArt X670E-CREATOR WIFI",
Tested on Z590M-PLUS. dmesg log: nct6775: Found NCT6798D or compatible chip at 0x2e:0x290 sensors output: nct6798-isa-0290 Adapter: ISA adapter in0: 672.00 mV (min = +0.00 V, max = +1.74 V) in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in2: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.28 V (min = +0.00 V, max = +0.00 V) ALARM in4: 1.01 V (min = +0.00 V, max = +0.00 V) ALARM in5: 808.00 mV (min = +0.00 V, max = +0.00 V) ALARM in6: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.38 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.20 V (min = +0.00 V, max = +0.00 V) ALARM in9: 528.00 mV (min = +0.00 V, max = +0.00 V) ALARM in10: 672.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 528.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.21 V (min = +0.00 V, max = +0.00 V) ALARM in13: 992.00 mV (min = +0.00 V, max = +0.00 V) ALARM in14: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 971 RPM (min = 0 RPM) fan2: 1525 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1094 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) fan6: 0 RPM (min = 0 RPM) fan7: 0 RPM (min = 0 RPM) SYSTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor CPUTIN: +40.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +26.0°C sensor = thermistor AUXTIN1: +8.0°C sensor = thermistor AUXTIN2: +22.0°C sensor = thermistor AUXTIN3: +25.0°C sensor = thermistor PECI Agent 0 Calibration: +40.0°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +55.0°C PCH_CPU_TEMP: +0.0°C intrusion0: OK intrusion1: ALARM beep_enable: disabled Signed-off-by: Erik Ekman <erik@kryo.se> --- drivers/hwmon/nct6775-platform.c | 3 +++ 1 file changed, 3 insertions(+)