Message ID | 20230406164331.6557-2-daniel.matyas@analog.com (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | Hwmon driver for MAX31827 temperature switch | expand |
On Thu, 06 Apr 2023 19:43:26 +0300, Daniel Matyas wrote: > MAX31827 is a low-power temperature switch with I2C interface. > > The device is a ±1°C accuracy from -40°C to +125°C > (12 bits) local temperature switch and sensor with I2C/SM- > Bus interface. The combination of small 6-bump wafer-lev- > el package (WLP) and high accuracy makes this temper- > ature sensor/switch ideal for a wide range of applications. > > Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> > --- > .../bindings/hwmon/adi,max31827.yaml | 48 +++++++++++++++++++ > .../devicetree/bindings/trivial-devices.yaml | 2 + > MAINTAINERS | 7 +++ > 3 files changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/hwmon/adi,max31827.yaml:48:4: [error] no new line character at the end of file (new-line-at-end-of-file) dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/hwmon/adi,max31827.example.dtb: max31827@42: 'vref-supply' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/trivial-devices.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230406164331.6557-2-daniel.matyas@analog.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 06/04/2023 18:43, Daniel Matyas wrote: > MAX31827 is a low-power temperature switch with I2C interface. > > The device is a ±1°C accuracy from -40°C to +125°C > (12 bits) local temperature switch and sensor with I2C/SM- > Bus interface. The combination of small 6-bump wafer-lev- > el package (WLP) and high accuracy makes this temper- > ature sensor/switch ideal for a wide range of applications. > > Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> > --- > .../bindings/hwmon/adi,max31827.yaml | 48 +++++++++++++++++++ > .../devicetree/bindings/trivial-devices.yaml | 2 + > MAINTAINERS | 7 +++ > 3 files changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml > new file mode 100644 > index 000000000000..b6ed2d46a35d > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch Where are the compatibles? I expect them in such case to be compatible with this 31827. > + > +maintainers: > + - Daniel Matyas <daniel.matyas@analog.com> > + > +description: | > + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with > + I2C Interface > + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf Missing blank line > +properties: > + compatible: > + enum: > + - adi,max31827 > + > + reg: > + maxItems: 1 > + > + vref-supply: > + description: > + Must have values in the interval (1.6V; 3.6V) in order for the device to > + function correctly. > + > +required: > + - compatible > + - reg > + - vref-supply > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; Drop status > + max31827: max31827@42 { Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Drop also label. You do not use it. > + compatible = "adi,max31827"; > + reg = <0x42>; > + vref-supply = <®_vdd>; > + }; > + }; > +... > \ No newline at end of file Patch error to fix. > diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml > index 6f482a254a1d..7763610b97bc 100644 > --- a/Documentation/devicetree/bindings/trivial-devices.yaml > +++ b/Documentation/devicetree/bindings/trivial-devices.yaml > @@ -43,6 +43,8 @@ properties: > - adi,adp5589 > # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher > - adi,lt7182s > + # MAX31827 Low-Power Temperature Switch with I2C interface > + - adi,max31827 No need for this. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml new file mode 100644 index 000000000000..b6ed2d46a35d --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas <daniel.matyas@analog.com> + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf +properties: + compatible: + enum: + - adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + max31827: max31827@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + }; + }; +... \ No newline at end of file diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 6f482a254a1d..7763610b97bc 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -43,6 +43,8 @@ properties: - adi,adp5589 # Analog Devices LT7182S Dual Channel 6A, 20V PolyPhase Step-Down Silent Switcher - adi,lt7182s + # MAX31827 Low-Power Temperature Switch with I2C interface + - adi,max31827 # AMS iAQ-Core VOC Sensor - ams,iaq-core # i2c serial eeprom (24cxx) diff --git a/MAINTAINERS b/MAINTAINERS index 90abe83c02f3..549cea6bc340 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12535,6 +12535,13 @@ F: Documentation/userspace-api/media/drivers/max2175.rst F: drivers/media/i2c/max2175* F: include/uapi/linux/max2175.h +MAX31827 TEMPERATURE SWITCH DRIVER +M: Daniel Matyas <daniel.matyas@analog.com> +L: linux-hwmon@vger.kernel.org +S: Supported +W: http://ez.analog.com/community/linux-device-drivers +F: Documentation/devicetree/bindings/hwmon/adi,max31827.yaml + MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER L: linux-hwmon@vger.kernel.org S: Orphan
MAX31827 is a low-power temperature switch with I2C interface. The device is a ±1°C accuracy from -40°C to +125°C (12 bits) local temperature switch and sensor with I2C/SM- Bus interface. The combination of small 6-bump wafer-lev- el package (WLP) and high accuracy makes this temper- ature sensor/switch ideal for a wide range of applications. Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> --- .../bindings/hwmon/adi,max31827.yaml | 48 +++++++++++++++++++ .../devicetree/bindings/trivial-devices.yaml | 2 + MAINTAINERS | 7 +++ 3 files changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml