From patchwork Fri Jul 14 06:43:36 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: werneazc X-Patchwork-Id: 13312997 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EFEBCEB64DA for ; Fri, 14 Jul 2023 06:43:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231864AbjGNGnt (ORCPT ); Fri, 14 Jul 2023 02:43:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36422 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231854AbjGNGnr (ORCPT ); Fri, 14 Jul 2023 02:43:47 -0400 Received: from mail-il1-x143.google.com (mail-il1-x143.google.com [IPv6:2607:f8b0:4864:20::143]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7637B2698; Thu, 13 Jul 2023 23:43:45 -0700 (PDT) Received: by mail-il1-x143.google.com with SMTP id e9e14a558f8ab-34617b29276so6532995ab.0; Thu, 13 Jul 2023 23:43:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20221208; t=1689317025; x=1691909025; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=wffe1vS+f752A0Pf7z40C5tMz30DOBDsupKmEE8rn28=; b=mNw+LvfacCZx9yOGa/5EMlRgaS2skq7Miz4rOkLVhKo/i2EDN3iI5vsIainIjRA1t8 gq8JunED6hSsC55+yM5fKHsiG8ZkvyqmVoKitFviEXM5sg3PEPtgWRnpkV8yPFtvhVPs jcRi5a/1DI3hWsWKossEF5BHRyb6n6Jz/sbCj3YibwPWLjP2hK/zap3ajB/hr/Xu/GSd SAUigJKoueiyYuCxmx7izWDHvaRAbpSvBUCC4UZHfgX0+CLXbqfjROY1sxfP9KlO5X3s nMkamW9tsrx2JthL9xmDw1AQyo9vAfvdFHXZ9y7ZaBXREhQJLop0lLoqbm2995lAEvKS TSQg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1689317025; x=1691909025; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=wffe1vS+f752A0Pf7z40C5tMz30DOBDsupKmEE8rn28=; b=CDlMzjphD9aiLu3TSrM0Bv80RUMQP2opP1lbkchpxoq8JQkKR3oR6CpgX9h/RMAFGs VzodFQOEJzzBWU+Qn74BvwuVCKaFlROZ3DMyXntoXVuRwonH6nTrAA2uv4VEzwgWW2DG Th4DZreXj3Lu4Rdo/afqBaIwuDhKdcDOvLITbWDY9PZpswJe6MoTu5OHYIOhx8mU7D1c hy2b4P2MkarmrXlk8MlpcwN5iKm298oB6PKqEpvUfZcHlZZpHBdY8V69fbibPoAXXrLE gG3S7Wu3L+yxcgm+hufl0lN9rWfunSB7PytmsWNuPviRApeGWzUqOpjkdCpLO2+ci9uD XEkg== X-Gm-Message-State: ABy/qLYZ5nmX+clPXyeEcDp8Ahfeac4uzV/nrx/Uvb35EaiBC/Y4papM zFTf65nNpYAtGKni9ZF6XVA= X-Google-Smtp-Source: APBJJlEc/biaFQQCtvNmMmTkro7jijDLiq2Tzfp4FV8q1R2pOZXaD2+IKCkXxOaPrOcFmK6bj1dzag== X-Received: by 2002:a05:6e02:1d84:b0:345:9d3a:709c with SMTP id h4-20020a056e021d8400b003459d3a709cmr1433081ila.12.1689317024589; Thu, 13 Jul 2023 23:43:44 -0700 (PDT) Received: from ws-565760.systec.local ([212.185.67.148]) by smtp.gmail.com with ESMTPSA id t28-20020a02ccbc000000b0042b3bf0baacsm2390245jap.138.2023.07.13.23.43.43 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 13 Jul 2023 23:43:44 -0700 (PDT) From: Andre Werner X-Google-Original-From: Andre Werner To: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, Andre Werner Subject: [PATCH v2 2/2] hwmon: (hs3001) Add driver for Renesas HS3001 Date: Fri, 14 Jul 2023 08:43:36 +0200 Message-ID: <20230714064336.28371-2-andre.werner@systec-electronic.com> X-Mailer: git-send-email 2.41.0 In-Reply-To: <20230714064336.28371-1-andre.werner@systec-electronic.com> References: <20230714064336.28371-1-andre.werner@systec-electronic.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-hwmon@vger.kernel.org Add base support for Renesas HS3001 temperature and humidity sensors and its compatibles HS3002, HS3003 and HS3004. The sensor has a fix I2C address 0x44. The resolution is fixed to 14bit (ref. Missing feature). Missing feature: - Accessing non-volatile memory: Custom board has no possibility to control voltage supply of sensor. Thus, we cannot send the necessary control commands within the first 10ms after power-on. Signed-off-by: Andre Werner --- Documentation/hwmon/hs3001.rst | 37 +++++ MAINTAINERS | 6 + drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/hs3001.c | 259 +++++++++++++++++++++++++++++++++ 5 files changed, 313 insertions(+) create mode 100644 Documentation/hwmon/hs3001.rst create mode 100644 drivers/hwmon/hs3001.c diff --git a/Documentation/hwmon/hs3001.rst b/Documentation/hwmon/hs3001.rst new file mode 100644 index 000000000000..703fb9c45313 --- /dev/null +++ b/Documentation/hwmon/hs3001.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver HS3001 +=================== + +Supported chips: + + * Renesas HS3001, HS3002, HS3003, HS3004 + + Prefix: 'hs3001' + + Addresses scanned: - + + Datasheet: https://www.renesas.com/us/en/document/dst/hs300x-datasheet?r=417401 + +Author: + + - Andre Werner + +Description +----------- + +This driver implements support for the Renesas HS3001 chips, a humidity +and temperature family. Temperature is measured in degrees celsius, relative +humidity is expressed as a percentage. In the sysfs interface, all values are +scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. + +The device communicates with the I2C protocol. Sensors have the I2C +address 0x44 by default. + +sysfs-Interface +--------------- + +=============================================================================== +temp1_input: temperature input +humidity1_input: humidity input +=============================================================================== diff --git a/MAINTAINERS b/MAINTAINERS index dfbb271f1667..4d8603436f9f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9484,6 +9484,12 @@ S: Maintained W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi F: fs/hpfs/ +HS3001 Hardware Temperature and Humidity Sensor +M: Andre Werner +L: linux-hwmon@vger.kernel.org +S: Maintained +F: drivers/hwmon/hs3001.c + HSI SUBSYSTEM M: Sebastian Reichel S: Maintained diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 307477b8a371..ca6be5a23271 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -734,6 +734,16 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. +config SENSORS_HS3001 + tristate "Renesas HS3001 humidity and temperature sensors" + depends on I2C + help + If you say yes here you get support for the Renesas HS3001, + to HS3004 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called hs3001. + config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3f4b0fda0998..cdae4e1fc919 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -86,6 +86,7 @@ obj-$(CONFIG_SENSORS_GSC) += gsc-hwmon.o obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o obj-$(CONFIG_SENSORS_GXP_FAN_CTRL) += gxp-fan-ctrl.o obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o +obj-$(CONFIG_SENSORS_HS3001) += hs3001.o obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o diff --git a/drivers/hwmon/hs3001.c b/drivers/hwmon/hs3001.c new file mode 100644 index 000000000000..af8ad72dccb0 --- /dev/null +++ b/drivers/hwmon/hs3001.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* This is a non-complete driver implementation for the + * HS3001 humidity and temperature sensor and compatibles. It does not include + * the configuration possibilities, where it needs to be set to 'programming mode' + * during power-up. + * + * + * Copyright (C) 2022 SYS TEC electronic AG + * Author: Andre Werner + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Measurement times */ +#define HS3001_WAKEUP_TIME 100 /* us */ +#define HS3001_8BIT_RESOLUTION 550 /* us */ +#define HS3001_10BIT_RESOLUTION 1310 /* us */ +#define HS3001_12BIT_RESOLUTION 4500 /* us */ +#define HS3001_14BIT_RESOLUTION 16900 /* us */ + +#define HS3001_RESPONSE_LENGTH 4 + +#define HS3001_FIXPOINT_ARITH 1000 +#define HS3001_MIN_TEMPERATURE (-40 * HS3001_FIXPOINT_ARITH) /* milli degree */ +#define HS3001_MAX_TEMPERATURE (125 * HS3001_FIXPOINT_ARITH) /* milli degree */ +#define HS3001_MIN_HUMIDITY (0 * HS3001_FIXPOINT_ARITH) /* milli percent */ +#define HS3001_MAX_HUMIDITY (100 * HS3001_FIXPOINT_ARITH) /* milli percent */ + +#define HS3001_MASK_HUMIDITY_0X3FFF 0x3FFF +#define HS3001_MASK_TEMPERATURE_0XFFFC 0xFFFC +#define HS3001_MASK_STATUS_0XC0 0xC0 +#define HS3001_STATUS_SHIFT 6 + +/* Definitions for Status Bits of A/D Data */ +#define HS3001_DATA_VALID 0x00 /* Valid Data */ +#define HS3001_DATA_STALE 0x01 /* Stale Data */ + +#define LIMIT_MAX 0 +#define LIMIT_MIN 1 + +enum hs3001_chips { + hs3001, +}; + +struct hs3001_data { + struct i2c_client *client; + enum hs3001_chips type; + u32 wait_time; /* in us */ + int temperature; /* in milli degree */ + u32 humidity; /* in milli % */ +}; + +static int hs3001_extract_temperature(u16 raw) +{ + /* fixpoint arithmetic 1 digit */ + int temp = ((raw & HS3001_MASK_TEMPERATURE_0XFFFC) >> 2) * + HS3001_FIXPOINT_ARITH; + + temp /= (1 << 14) - 1; + + return temp * 165 - 40 * HS3001_FIXPOINT_ARITH; +} + +static u32 hs3001_extract_humidity(u16 raw) +{ + int hum = (raw & HS3001_MASK_HUMIDITY_0X3FFF) * HS3001_FIXPOINT_ARITH; + + hum /= (1 << 14) - 1; + + return hum * 100; +} + +static int hs3001_data_fetch_command(struct i2c_client *client, + struct hs3001_data *data) +{ + int ret; + u8 buf[HS3001_RESPONSE_LENGTH]; + u8 hs3001_status; + + ret = i2c_master_recv(client, buf, HS3001_RESPONSE_LENGTH); + + if (ret != HS3001_RESPONSE_LENGTH) { + ret = ret < 0 ? ret : -EIO; + dev_dbg(&client->dev, + "Error in i2c communication. Error code: %d.\n", ret); + return ret; + } + + hs3001_status = (buf[0] & HS3001_MASK_STATUS_0XC0) >> + HS3001_STATUS_SHIFT; + if (hs3001_status == HS3001_DATA_STALE) { + dev_dbg(&client->dev, "Sensor busy.\n"); + return -EBUSY; + } else if (hs3001_status != HS3001_DATA_VALID) { + dev_dbg(&client->dev, "Data invalid.\n"); + return -EIO; + } + + data->humidity = + hs3001_extract_humidity(be16_to_cpup((__be16 *)&buf[0])); + data->temperature = + hs3001_extract_temperature(be16_to_cpup((__be16 *)&buf[2])); + + return 0; +} + +umode_t hs3001_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + /* Both, humidity and temperature can only be read. */ + return 0444; +} + +int hs3001_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct hs3001_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ret; + unsigned char buf[1] = { 0x00 }; + + ret = i2c_master_send(client, buf, 0); + if (ret < 0) + return ret; + + /* Sensor needs some time to process measurement depending on + * resolution + */ + fsleep(data->wait_time); + + ret = hs3001_data_fetch_command(client, data); + if (ret < 0) + return ret; + + switch (type) { + case hwmon_temp: + switch (attr) { + case hwmon_temp_input: + *val = data->temperature; + break; + default: + return -EINVAL; + } + break; + case hwmon_humidity: + switch (attr) { + case hwmon_humidity_input: + *val = data->humidity; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct hwmon_channel_info *hs3001_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + HWMON_CHANNEL_INFO(humidity, HWMON_H_INPUT), + NULL +}; + +static const struct hwmon_ops hs3001_hwmon_ops = { + .is_visible = hs3001_is_visible, + .read = hs3001_read, +}; + +static const struct hwmon_chip_info hs3001_chip_info = { + .ops = &hs3001_hwmon_ops, + .info = hs3001_info, +}; + +/* device ID table */ +static const struct i2c_device_id hs3001_ids[] = { + { "hs3001", hs3001 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, hs3001_ids); + +static const struct of_device_id hs3001_of_match[] = { + {.compatible = "renesas,hs3001", + .data = (void *)hs3001 + }, + { }, +}; + +MODULE_DEVICE_TABLE(of, hs3001_of_match); + +static int hs3001_probe(struct i2c_client *client) +{ + struct hs3001_data *data; + struct device *hwmon_dev; + struct device *dev = &client->dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + + if (client->dev.of_node) + data->type = (enum hs3001_chips)of_device_get_match_data(&client->dev); + else + data->type = i2c_match_id(hs3001_ids, client)->driver_data; + + /* Measurement time = wake-up time + measurement time temperature + * + measurment time humidity. This is currently static, because + * enabling programming mode is not supported, yet. + */ + data->wait_time = (HS3001_WAKEUP_TIME + HS3001_14BIT_RESOLUTION + + HS3001_14BIT_RESOLUTION); + + /* Test access to device */ + ret = i2c_master_send(client, NULL, 0); + if (ret) + return ret; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, + client->name, data, &hs3001_chip_info, NULL); + + if (IS_ERR(hwmon_dev)) + return dev_err_probe(dev, PTR_ERR(hwmon_dev), + "Unable to register hwmon device.\n"); + + return 0; +} + +static struct i2c_driver hs3001_i2c_driver = { + .driver = { + .name = "hs3001", + .of_match_table = hs3001_of_match, + }, + .probe_new = hs3001_probe, + .id_table = hs3001_ids, +}; + +module_i2c_driver(hs3001_i2c_driver); + +MODULE_AUTHOR("Andre Werner "); +MODULE_DESCRIPTION("HS3001 humidity and temperature sensor base driver"); +MODULE_LICENSE("GPL");