@@ -1739,11 +1739,6 @@ static void identify_cpu(struct cpuinfo_
/* Clear/Set all flags overridden by options, after probe */
apply_forced_caps(c);
-#ifdef CONFIG_X86_64
- if (!topo_is_converted(c))
- c->topo.apicid = apic->phys_pkg_id(c->topo.initial_apicid, 0);
-#endif
-
/*
* Vendor-specific initialization. In this section we
* canonicalize the feature flags, meaning if there are
@@ -76,7 +76,6 @@ extern void init_intel_cacheinfo(struct
extern void init_amd_cacheinfo(struct cpuinfo_x86 *c);
extern void init_hygon_cacheinfo(struct cpuinfo_x86 *c);
-extern int detect_extended_topology(struct cpuinfo_x86 *c);
extern void check_null_seg_clears_base(struct cpuinfo_x86 *c);
void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, u16 die_id);
@@ -20,12 +20,6 @@
#define APICID_SOCKET_ID_BIT 6
-/*
- * nodes_per_socket: Stores the number of nodes per socket.
- * Refer to CPUID Fn8000_001E_ECX Node Identifiers[10:8]
- */
-static u32 nodes_per_socket = 1;
-
#ifdef CONFIG_NUMA
/*
* To workaround broken NUMA config. Read the comment in
@@ -49,76 +43,6 @@ static int nearby_node(int apicid)
}
#endif
-static void hygon_get_topology_early(struct cpuinfo_x86 *c)
-{
- if (cpu_has(c, X86_FEATURE_TOPOEXT))
- smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
-}
-
-/*
- * Fixup core topology information for
- * (1) Hygon multi-node processors
- * Assumption: Number of cores in each internal node is the same.
- * (2) Hygon processors supporting compute units
- */
-static void hygon_get_topology(struct cpuinfo_x86 *c)
-{
- /* get information required for multi-node processors */
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- int err;
- u32 eax, ebx, ecx, edx;
-
- cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
-
- c->topo.die_id = ecx & 0xff;
-
- c->topo.core_id = ebx & 0xff;
-
- if (smp_num_siblings > 1)
- c->x86_max_cores /= smp_num_siblings;
-
- /*
- * In case leaf B is available, use it to derive
- * topology information.
- */
- err = detect_extended_topology(c);
- if (!err)
- c->x86_coreid_bits = get_count_order(c->x86_max_cores);
-
- /* Socket ID is ApicId[6] for these processors. */
- c->topo.pkg_id = c->topo.apicid >> APICID_SOCKET_ID_BIT;
-
- cacheinfo_hygon_init_llc_id(c);
- } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- c->topo.die_id = value & 7;
- c->topo.llc_id = c->topo.die_id;
- } else
- return;
-
- if (nodes_per_socket > 1)
- set_cpu_cap(c, X86_FEATURE_AMD_DCM);
-}
-
-/*
- * On Hygon setup the lower bits of the APIC id distinguish the cores.
- * Assumes number of cores is a power of two.
- */
-static void hygon_detect_cmp(struct cpuinfo_x86 *c)
-{
- unsigned int bits;
-
- bits = c->x86_coreid_bits;
- /* Low order bits define the core id (index of core in socket) */
- c->topo.core_id = c->topo.initial_apicid & ((1 << bits)-1);
- /* Convert the initial APIC ID into the socket ID */
- c->topo.pkg_id = c->topo.initial_apicid >> bits;
- /* Use package ID also for last level cache */
- c->topo.llc_id = c->topo.die_id = c->topo.pkg_id;
-}
-
static void srat_detect_node(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_NUMA
@@ -169,32 +93,6 @@ static void srat_detect_node(struct cpui
#endif
}
-static void early_init_hygon_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- unsigned int bits, ecx;
-
- /* Multi core CPU? */
- if (c->extended_cpuid_level < 0x80000008)
- return;
-
- ecx = cpuid_ecx(0x80000008);
-
- c->x86_max_cores = (ecx & 0xff) + 1;
-
- /* CPU telling us the core id bits shift? */
- bits = (ecx >> 12) & 0xF;
-
- /* Otherwise recompute */
- if (bits == 0) {
- while ((1 << bits) < c->x86_max_cores)
- bits++;
- }
-
- c->x86_coreid_bits = bits;
-#endif
-}
-
static void bsp_init_hygon(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) {
@@ -208,18 +106,6 @@ static void bsp_init_hygon(struct cpuinf
if (cpu_has(c, X86_FEATURE_MWAITX))
use_mwaitx_delay();
- if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
- u32 ecx;
-
- ecx = cpuid_ecx(0x8000001e);
- __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1;
- } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
- u64 value;
-
- rdmsrl(MSR_FAM10H_NODE_ID, value);
- __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1;
- }
-
if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) &&
!boot_cpu_has(X86_FEATURE_VIRT_SSBD)) {
/*
@@ -238,8 +124,6 @@ static void early_init_hygon(struct cpui
{
u32 dummy;
- early_init_hygon_mc(c);
-
set_cpu_cap(c, X86_FEATURE_K8);
rdmsr_safe(MSR_AMD64_PATCH_LEVEL, &c->microcode, &dummy);
@@ -280,8 +164,6 @@ static void early_init_hygon(struct cpui
* we can set it unconditionally.
*/
set_cpu_cap(c, X86_FEATURE_VMMCALL);
-
- hygon_get_topology_early(c);
}
static void init_hygon(struct cpuinfo_x86 *c)
@@ -296,9 +178,6 @@ static void init_hygon(struct cpuinfo_x8
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
- /* get apicid instead of initial apic id from cpuid */
- c->topo.apicid = read_apic_id();
-
/*
* XXX someone from Hygon needs to confirm this DTRT
*
@@ -310,8 +189,6 @@ static void init_hygon(struct cpuinfo_x8
cpu_detect_cache_sizes(c);
- hygon_detect_cmp(c);
- hygon_get_topology(c);
srat_detect_node(c);
init_hygon_cacheinfo(c);
@@ -15,7 +15,6 @@ struct topo_scan {
u16 amd_node_id;
};
-bool topo_is_converted(struct cpuinfo_x86 *c);
void cpu_init_topology(struct cpuinfo_x86 *c);
void cpu_parse_topology(struct cpuinfo_x86 *c);
void topology_set_dom(struct topo_scan *tscan, enum x86_topology_domains dom,
@@ -61,18 +61,6 @@ static void parse_legacy(struct topo_sca
topology_set_dom(tscan, TOPO_CORE_DOMAIN, core_shift, cores >> smt_shift);
}
-bool topo_is_converted(struct cpuinfo_x86 *c)
-{
- /* Temporary until everything is converted over. */
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_HYGON:
- return false;
- default:
- /* Let all UP systems use the below */
- return true;
- }
-}
-
static bool fake_topology(struct topo_scan *tscan)
{
/*
@@ -137,6 +125,10 @@ static void parse_topology(struct topo_s
if (!IS_ENABLED(CONFIG_CPU_SUP_INTEL) || !cpu_parse_topology_ext(tscan))
parse_legacy(tscan);
break;
+ case X86_VENDOR_HYGON:
+ if (IS_ENABLED(CONFIG_CPU_SUP_HYGON))
+ cpu_parse_topology_amd(tscan);
+ break;
}
}
@@ -179,9 +171,6 @@ void cpu_parse_topology(struct cpuinfo_x
parse_topology(&tscan, false);
- if (!topo_is_converted(c))
- return;
-
for (dom = TOPO_SMT_DOMAIN; dom < TOPO_MAX_DOMAIN; dom++) {
if (tscan.dom_shifts[dom] == x86_topo_system.dom_shifts[dom])
continue;
@@ -210,9 +199,6 @@ void __init cpu_init_topology(struct cpu
parse_topology(&tscan, true);
- if (!topo_is_converted(c))
- return;
-
/* Copy the shift values and calculate the unit sizes. */
memcpy(x86_topo_system.dom_shifts, tscan.dom_shifts, sizeof(x86_topo_system.dom_shifts));
Switch it over to use the consolidated topology evaluation and remove the temporary safe guards which are not longer needed. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- arch/x86/kernel/cpu/common.c | 5 - arch/x86/kernel/cpu/cpu.h | 1 arch/x86/kernel/cpu/hygon.c | 123 ---------------------------------- arch/x86/kernel/cpu/topology.h | 1 arch/x86/kernel/cpu/topology_common.c | 22 +----- 5 files changed, 4 insertions(+), 148 deletions(-)