@@ -1076,6 +1076,20 @@ config INTEL_SCU_IPC_UTIL
source "drivers/platform/x86/siemens/Kconfig"
+config SILICOM_PLATFORM
+ tristate "Silicom Edge Networking device support"
+ depends on HWMON
+ select LEDS_CLASS_MULTICOLOR
+ help
+ This option enables support for the LEDs/GPIO/etc downstream of the
+ embedded controller on Silicom "Cordoba" hardware and derivatives.
+
+ This platform driver provides support for various functions via
+ the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON)
+ and device attributes.
+
+ If you have a Silicom network appliance, say Y or M here.
+
config WINMATE_FM07_KEYS
tristate "Winmate FM07/FM07P front-panel keys driver"
depends on INPUT
@@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE) += serial-multi-instantiate.o
obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
obj-$(CONFIG_TOUCHSCREEN_DMI) += touchscreen_dmi.o
obj-$(CONFIG_WIRELESS_HOTKEY) += wireless-hotkey.o
+obj-$(CONFIG_SILICOM_PLATFORM) += silicom-platform.o
obj-$(CONFIG_X86_ANDROID_TABLETS) += x86-android-tablets/
# Intel uncore drivers
new file mode 100644
@@ -0,0 +1,1001 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// silicom-platform.c - Silicom MEC170x platform driver
+//
+// Copyright (C) 2023 Henry Shi <henrys@silicom-usa.com>
+#include <linux/dmi.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/units.h>
+
+#define MEC_EFUSE_LSB_ADDR 0x28
+#define MEC_POWER_CYCLE_ADDR 0x24
+#define MEC_PORT_OFFSET_MASK 0xfc
+#define MEC_PORT_CHANNEL_MASK 0x7
+#define MEC_DATA_OFFSET_MASK 0x03
+#define MEC_GPIO_IN_POS 0x08
+#define MEC_IO_BASE 0x0800
+#define MEC_IO_LEN 0x8
+#define MEC_ADDR ((MEC_IO_BASE) + 0x02)
+#define MEC_DATA_OFFSET(offset) ((MEC_IO_BASE) + 0x04 + (offset))
+#define EC_ADDR_LSB MEC_ADDR
+#define EC_ADDR_MSB ((MEC_IO_BASE) + MEC_DATA_OFFSET_MASK)
+#define SILICOM_MEC_MAGIC 0x5a
+#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) | (bit))
+#define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14)
+#define MEC_VERSION_MAJOR GENMASK(15, 14)
+#define MEC_VERSION_MINOR GENMASK(13, 8)
+#define MEC_GET_BITS(high, low, arg) FIELD_GET(GENMASK(high, low), arg)
+#define IO_REG_BANK 0x0
+#define DEFAULT_CHAN_LO 0
+#define DEFAULT_CHAN_HI 0
+#define DEFAULT_CHAN_LO_T 0xc
+
+static DEFINE_MUTEX(mec_io_mutex);
+static int efuse_status;
+static int mec_uc_version;
+static int power_cycle;
+
+static const struct hwmon_channel_info *silicom_fan_control_info[] = {
+ HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
+ HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
+ NULL
+};
+
+struct silicom_platform_info {
+ int io_base;
+ int io_len;
+ struct led_classdev_mc *led_info;
+ struct gpio_chip *gpiochip;
+ u8 *gpio_channels;
+ u16 ngpio;
+};
+
+static const char * const plat_0222_gpio_names[] = {
+ "AUTOM0_SFP_TX_FAULT",
+ "SLOT2_LED_OUT",
+ "SIM_M2_SLOT2_B_DET",
+ "SIM_M2_SLOT2_A_DET",
+ "SLOT1_LED_OUT",
+ "SIM_M2_SLOT1_B_DET",
+ "SIM_M2_SLOT1_A_DET",
+ "SLOT0_LED_OUT",
+ "WAN_SFP0_RX_LOS",
+ "WAN_SFP0_PRSNT_N",
+ "WAN_SFP0_TX_FAULT",
+ "AUTOM1_SFP_RX_LOS",
+ "AUTOM1_SFP_PRSNT_N",
+ "AUTOM1_SFP_TX_FAULT",
+ "AUTOM0_SFP_RX_LOS",
+ "AUTOM0_SFP_PRSNT_N",
+ "WAN_SFP1_RX_LOS",
+ "WAN_SFP1_PRSNT_N",
+ "WAN_SFP1_TX_FAULT",
+ "SIM_M2_SLOT1_MUX_SEL",
+ "W_DISABLE_M2_SLOT1_N",
+ "W_DISABLE_MPCIE_SLOT0_N",
+ "W_DISABLE_M2_SLOT0_N",
+ "BT_COMMAND_MODE",
+ "WAN_SFP1_TX_DISABLE",
+ "WAN_SFP0_TX_DISABLE",
+ "AUTOM1_SFP_TX_DISABLE",
+ "AUTOM0_SFP_TX_DISABLE",
+ "SIM_M2_SLOT2_MUX_SEL",
+ "W_DISABLE_M2_SLOT2_N",
+ "RST_CTL_M2_SLOT_1_N",
+ "RST_CTL_M2_SLOT_2_N",
+ "PM_USB_PWR_EN_BOT",
+ "PM_USB_PWR_EN_TOP",
+};
+
+static u8 plat_0222_gpio_channels[] = {
+ OFFSET_BIT_TO_CHANNEL(0x00, 0),
+ OFFSET_BIT_TO_CHANNEL(0x00, 1),
+ OFFSET_BIT_TO_CHANNEL(0x00, 2),
+ OFFSET_BIT_TO_CHANNEL(0x00, 3),
+ OFFSET_BIT_TO_CHANNEL(0x00, 4),
+ OFFSET_BIT_TO_CHANNEL(0x00, 5),
+ OFFSET_BIT_TO_CHANNEL(0x00, 6),
+ OFFSET_BIT_TO_CHANNEL(0x00, 7),
+ OFFSET_BIT_TO_CHANNEL(0x01, 0),
+ OFFSET_BIT_TO_CHANNEL(0x01, 1),
+ OFFSET_BIT_TO_CHANNEL(0x01, 2),
+ OFFSET_BIT_TO_CHANNEL(0x01, 3),
+ OFFSET_BIT_TO_CHANNEL(0x01, 4),
+ OFFSET_BIT_TO_CHANNEL(0x01, 5),
+ OFFSET_BIT_TO_CHANNEL(0x01, 6),
+ OFFSET_BIT_TO_CHANNEL(0x01, 7),
+ OFFSET_BIT_TO_CHANNEL(0x02, 0),
+ OFFSET_BIT_TO_CHANNEL(0x02, 1),
+ OFFSET_BIT_TO_CHANNEL(0x02, 2),
+ OFFSET_BIT_TO_CHANNEL(0x09, 0),
+ OFFSET_BIT_TO_CHANNEL(0x09, 1),
+ OFFSET_BIT_TO_CHANNEL(0x09, 2),
+ OFFSET_BIT_TO_CHANNEL(0x09, 3),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 0),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 1),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 2),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 3),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 4),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 5),
+ OFFSET_BIT_TO_CHANNEL(0x0a, 6),
+ OFFSET_BIT_TO_CHANNEL(0x0b, 0),
+ OFFSET_BIT_TO_CHANNEL(0x0b, 1),
+ OFFSET_BIT_TO_CHANNEL(0x0b, 2),
+ OFFSET_BIT_TO_CHANNEL(0x0b, 3),
+};
+
+static struct platform_device *silicom_platform_dev;
+static struct led_classdev_mc *silicom_led_info __initdata;
+static struct gpio_chip *silicom_gpiochip __initdata;
+static u8 *silicom_gpio_channels __initdata;
+
+static int silicom_mec_port_get(unsigned int offset)
+{
+ u8 reg;
+
+ mutex_lock(&mec_io_mutex);
+ /* Get the dword offset from the channel */
+ outb(MEC_GET_BITS(31, 3, offset) & MEC_PORT_OFFSET_MASK, MEC_ADDR);
+
+ /* Get the current register */
+ reg = inb(MEC_DATA_OFFSET(MEC_GET_BITS(31, 3, offset) & MEC_DATA_OFFSET_MASK));
+ mutex_unlock(&mec_io_mutex);
+
+ return (reg >> (offset & MEC_PORT_CHANNEL_MASK)) & 0x01;
+}
+
+static enum led_brightness silicom_mec_led_get(int channel)
+{
+ /* Outputs are active low */
+ return silicom_mec_port_get(channel) ? LED_OFF : LED_ON;
+}
+
+static void silicom_mec_port_set(int channel, int on)
+{
+ u8 reg;
+
+ mutex_lock(&mec_io_mutex);
+ /* Get the dword offset from the channel */
+ outb(MEC_GET_BITS(31, 3, channel) & MEC_PORT_OFFSET_MASK, MEC_ADDR);
+
+ /* Get the current port settings */
+ reg = inb(MEC_DATA_OFFSET(MEC_GET_BITS(31, 3, channel) & MEC_DATA_OFFSET_MASK));
+ /* Outputs are active low, so clear the bit for on, or set it for off */
+ if (on)
+ reg &= ~(1 << (channel & MEC_PORT_CHANNEL_MASK));
+ else
+ reg |= 1 << (channel & MEC_PORT_CHANNEL_MASK);
+ /* Write back the updated register */
+ outb(reg, MEC_DATA_OFFSET(MEC_GET_BITS(31, 3, channel) & MEC_DATA_OFFSET_MASK));
+ mutex_unlock(&mec_io_mutex);
+}
+
+static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev)
+{
+ struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+ enum led_brightness brightness = LED_OFF;
+ int i;
+
+ for (i = 0; i < mc_cdev->num_colors; i++) {
+ mc_cdev->subled_info[i].brightness =
+ silicom_mec_led_get(mc_cdev->subled_info[i].channel);
+ /* Mark the overall brightness as LED_ON if any of the subleds are on */
+ if (mc_cdev->subled_info[i].brightness != LED_OFF)
+ brightness = LED_ON;
+ }
+
+ return brightness;
+}
+
+static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+ int i;
+
+ led_mc_calc_color_components(mc_cdev, brightness);
+ for (i = 0; i < mc_cdev->num_colors; i++) {
+ silicom_mec_port_set(mc_cdev->subled_info[i].channel,
+ mc_cdev->subled_info[i].brightness);
+ }
+}
+
+static int silicom_gpio_get_direction(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ u8 *channels = gpiochip_get_data(gc);
+
+ /* Input registers have offsets between [0x00, 0x07] */
+ if (CHANNEL_TO_OFFSET(channels[offset]) < MEC_GPIO_IN_POS)
+ return GPIO_LINE_DIRECTION_IN;
+
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int silicom_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ int direction = silicom_gpio_get_direction(gc, offset);
+
+ return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL;
+}
+
+static void silicom_gpio_set(struct gpio_chip *gc,
+ unsigned int offset,
+ int value)
+{
+ u8 *channels = gpiochip_get_data(gc);
+ int direction = silicom_gpio_get_direction(gc, offset);
+ int channel = channels[offset];
+
+ if (direction == GPIO_LINE_DIRECTION_IN)
+ return;
+
+ if (value)
+ silicom_mec_port_set(channel, 0);
+ else if (value == 0)
+ silicom_mec_port_set(channel, 1);
+ else
+ pr_err("Wrong argument value: %d\n", value);
+}
+
+static int silicom_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset,
+ int value)
+{
+ int direction = silicom_gpio_get_direction(gc, offset);
+
+ if (direction == GPIO_LINE_DIRECTION_IN)
+ return -EINVAL;
+
+ silicom_gpio_set(gc, offset, value);
+
+ return 0;
+}
+
+static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ u8 *channels = gpiochip_get_data(gc);
+ int channel = channels[offset];
+
+ return silicom_mec_port_get(channel);
+}
+
+static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_WHITE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
+ },
+ {
+ .color_index = LED_COLOR_ID_YELLOW,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
+ },
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
+ },
+};
+
+static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_WHITE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
+ },
+ {
+ .color_index = LED_COLOR_ID_AMBER,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
+ },
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
+ },
+};
+
+static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
+ },
+ {
+ .color_index = LED_COLOR_ID_GREEN,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
+ },
+ {
+ .color_index = LED_COLOR_ID_BLUE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
+ },
+ {
+ .color_index = LED_COLOR_ID_YELLOW,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
+ },
+};
+
+static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
+ },
+ {
+ .color_index = LED_COLOR_ID_GREEN,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
+ },
+ {
+ .color_index = LED_COLOR_ID_BLUE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
+ },
+ {
+ .color_index = LED_COLOR_ID_YELLOW,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
+ },
+};
+
+static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
+ },
+ {
+ .color_index = LED_COLOR_ID_GREEN,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
+ },
+ {
+ .color_index = LED_COLOR_ID_BLUE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
+ },
+ {
+ .color_index = LED_COLOR_ID_YELLOW,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
+ },
+};
+
+static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
+ {
+ .led_cdev = {
+ .name = "multicolor:wan",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
+ .subled_info = plat_0222_wan_mc_subled_info,
+ },
+ {
+ .led_cdev = {
+ .name = "multicolor:sys",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
+ .subled_info = plat_0222_sys_mc_subled_info,
+ },
+ {
+ .led_cdev = {
+ .name = "multicolor:stat1",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
+ .subled_info = plat_0222_stat1_mc_subled_info,
+ },
+ {
+ .led_cdev = {
+ .name = "multicolor:stat2",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
+ .subled_info = plat_0222_stat2_mc_subled_info,
+ },
+ {
+ .led_cdev = {
+ .name = "multicolor:stat3",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
+ .subled_info = plat_0222_stat3_mc_subled_info,
+ },
+ { },
+};
+
+static struct gpio_chip silicom_gpio_chip = {
+ .label = "silicom-gpio",
+ .get_direction = silicom_gpio_get_direction,
+ .direction_input = silicom_gpio_direction_input,
+ .direction_output = silicom_gpio_direction_output,
+ .get = silicom_gpio_get,
+ .set = silicom_gpio_set,
+ .base = -1,
+ .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
+ .names = plat_0222_gpio_names,
+ /* We're using a mutex to protect the indirect access, so we can sleep
+ * if the lock blocks
+ */
+ .can_sleep = true,
+};
+
+static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
+ .io_base = MEC_IO_BASE,
+ .io_len = MEC_IO_LEN,
+ .led_info = plat_0222_mc_led_info,
+ .gpiochip = &silicom_gpio_chip,
+ .gpio_channels = plat_0222_gpio_channels,
+ /* The original generic cordoba does not have the last 4 outputs of the
+ * plat_0222 variant, the rest are the same, so use the same longer list,
+ * but ignore the last entries here
+ */
+ .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
+
+};
+
+static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
+ },
+ {
+ .color_index = LED_COLOR_ID_GREEN,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
+ },
+ {
+ .color_index = LED_COLOR_ID_BLUE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
+ },
+ {
+ .color_index = LED_COLOR_ID_AMBER,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
+ },
+};
+
+static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
+ },
+ {
+ .color_index = LED_COLOR_ID_GREEN,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
+ },
+ {
+ .color_index = LED_COLOR_ID_BLUE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
+ },
+ {
+ .color_index = LED_COLOR_ID_AMBER,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
+ },
+};
+
+static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
+ {
+ .color_index = LED_COLOR_ID_RED,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
+ },
+ {
+ .color_index = LED_COLOR_ID_GREEN,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
+ },
+ {
+ .color_index = LED_COLOR_ID_BLUE,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
+ },
+ {
+ .color_index = LED_COLOR_ID_AMBER,
+ .brightness = 1,
+ .intensity = 0,
+ .channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
+ },
+};
+
+static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
+ {
+ .led_cdev = {
+ .name = "multicolor:fp_left",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
+ .subled_info = cordoba_fp_left_mc_subled_info,
+ },
+ {
+ .led_cdev = {
+ .name = "multicolor:fp_center",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
+ .subled_info = cordoba_fp_center_mc_subled_info,
+ },
+ {
+ .led_cdev = {
+ .name = "multicolor:fp_right",
+ .brightness = 0,
+ .max_brightness = 1,
+ .brightness_set = silicom_mec_led_mc_brightness_set,
+ .brightness_get = silicom_mec_led_mc_brightness_get,
+ },
+ .num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
+ .subled_info = cordoba_fp_right_mc_subled_info,
+ },
+ { },
+};
+
+static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
+ .io_base = MEC_IO_BASE,
+ .io_len = MEC_IO_LEN,
+ .led_info = cordoba_mc_led_info,
+ .gpiochip = &silicom_gpio_chip,
+ .gpio_channels = plat_0222_gpio_channels,
+ .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
+};
+
+/*
+ * sysfs interface
+ */
+static ssize_t efuse_status_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u32 reg;
+
+ mutex_lock(&mec_io_mutex);
+ /* Select memory region */
+ outb(IO_REG_BANK, EC_ADDR_MSB);
+ outb(MEC_EFUSE_LSB_ADDR, EC_ADDR_LSB);
+
+ /* Get current data from the address */
+ reg = inl(MEC_DATA_OFFSET(DEFAULT_CHAN_LO));
+ mutex_unlock(&mec_io_mutex);
+
+ efuse_status = reg & 0x1;
+
+ return sprintf(buf, "%d\n", efuse_status);
+}
+static DEVICE_ATTR_RO(efuse_status);
+
+static ssize_t uc_version_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u32 reg;
+ int uc_version;
+
+ mutex_lock(&mec_io_mutex);
+ outb(IO_REG_BANK, EC_ADDR_MSB);
+ outb(DEFAULT_CHAN_LO, EC_ADDR_LSB);
+
+ reg = inl(MEC_DATA_OFFSET(DEFAULT_CHAN_LO));
+ mutex_unlock(&mec_io_mutex);
+ uc_version = MEC_GET_BITS(15, 8, reg);
+ if (uc_version >= 192)
+ pr_err("uc version not supported\n");
+
+ uc_version = FIELD_GET(MEC_VERSION_MAJOR, reg) * CENTI +
+ FIELD_GET(MEC_VERSION_MINOR, reg);
+
+ mec_uc_version = uc_version;
+ return sprintf(buf, "%d\n", mec_uc_version);
+}
+static DEVICE_ATTR_RO(uc_version);
+
+static ssize_t power_cycle_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", power_cycle);
+}
+
+static void powercycle_uc(void)
+{
+ mutex_lock(&mec_io_mutex);
+ /* Select memory region */
+ outb(IO_REG_BANK, EC_ADDR_MSB);
+ outb(MEC_POWER_CYCLE_ADDR, EC_ADDR_LSB);
+
+ /* Set to 1 for current data from the address */
+ outb(1, MEC_DATA_OFFSET(DEFAULT_CHAN_LO));
+ mutex_unlock(&mec_io_mutex);
+}
+
+static ssize_t power_cycle_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ if (sscanf(buf, "%du", &power_cycle) != 1) {
+ dev_err(dev, "Failed to read power_cycle\n");
+ return -EINVAL;
+ }
+ if (power_cycle > 0)
+ powercycle_uc();
+
+ return count;
+}
+static DEVICE_ATTR_RW(power_cycle);
+
+static struct attribute *silicom_attrs[] = {
+ &dev_attr_efuse_status.attr,
+ &dev_attr_uc_version.attr,
+ &dev_attr_power_cycle.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(silicom);
+
+static struct platform_driver silicom_platform_driver = {
+ .driver = {
+ .name = "silicom-platform",
+ .dev_groups = silicom_groups,
+ },
+};
+
+static int __init silicom_mc_leds_register(struct device *dev,
+ const struct led_classdev_mc *mc_leds)
+{
+ struct led_classdev_mc *led;
+ int i, err;
+ int size = sizeof(struct mc_subled);
+
+ for (i = 0; mc_leds[i].led_cdev.name; i++) {
+
+ led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+ memcpy(led, &mc_leds[i], sizeof(*led));
+
+ led->subled_info = devm_kzalloc(dev, led->num_colors * size, GFP_KERNEL);
+ if (!led->subled_info)
+ return -ENOMEM;
+ memcpy(led->subled_info, mc_leds[i].subled_info, led->num_colors * size);
+
+ err = devm_led_classdev_multicolor_register(dev, led);
+ if (err) {
+ dev_err(dev, "Failed to register[%d]: %d\n", i, err);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static u32 rpm_get(void)
+{
+ u32 reg;
+
+ mutex_lock(&mec_io_mutex);
+ /* Select memory region */
+ outb(IO_REG_BANK, EC_ADDR_MSB);
+ outb(DEFAULT_CHAN_LO_T, EC_ADDR_LSB);
+ /* Get current data from the address */
+ reg = inw(MEC_DATA_OFFSET(DEFAULT_CHAN_LO));
+ mutex_unlock(&mec_io_mutex);
+
+ return reg;
+}
+
+static u32 temp_get(void)
+{
+ u32 reg;
+
+ mutex_lock(&mec_io_mutex);
+ /* Select memory region */
+ outb(IO_REG_BANK, EC_ADDR_MSB);
+ outb(DEFAULT_CHAN_LO_T, EC_ADDR_LSB);
+ /* Get current data from the address */
+ reg = inl(MEC_DATA_OFFSET(DEFAULT_CHAN_LO));
+ mutex_unlock(&mec_io_mutex);
+
+ return MEC_GET_BITS(31, 16, reg) * CENTI;
+}
+
+static umode_t silicom_fan_control_fan_is_visible(const u32 attr)
+{
+ switch (attr) {
+ case hwmon_fan_input:
+ case hwmon_fan_label:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static umode_t silicom_fan_control_temp_is_visible(const u32 attr)
+{
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_label:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static int silicom_fan_control_read_fan(struct device *dev, u32 attr, long *val)
+{
+ switch (attr) {
+ case hwmon_fan_input:
+ *val = rpm_get();
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int silicom_fan_control_read_temp(struct device *dev, u32 attr, long *val)
+{
+ switch (attr) {
+ case hwmon_temp_input:
+ *val = temp_get();
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t silicom_fan_control_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_fan:
+ return silicom_fan_control_fan_is_visible(attr);
+ case hwmon_temp:
+ return silicom_fan_control_temp_is_visible(attr);
+ default:
+ return 0;
+ }
+}
+
+static int silicom_fan_control_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel,
+ long *val)
+{
+ switch (type) {
+ case hwmon_fan:
+ return silicom_fan_control_read_fan(dev, attr, val);
+ case hwmon_temp:
+ return silicom_fan_control_read_temp(dev, attr, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int silicom_fan_control_read_labels(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel,
+ const char **str)
+{
+ switch (type) {
+ case hwmon_fan:
+ *str = "Silicom_platfomr: Fan Speed";
+ return 0;
+ case hwmon_temp:
+ *str = "Silicom_platform: Thermostat Sensor";
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
+ .is_visible = silicom_fan_control_is_visible,
+ .read = silicom_fan_control_read,
+ .read_string = silicom_fan_control_read_labels,
+};
+
+static const struct hwmon_chip_info silicom_chip_info = {
+ .ops = &silicom_fan_control_hwmon_ops,
+ .info = silicom_fan_control_info,
+};
+
+static int __init silicom_platform_probe(struct platform_device *device)
+{
+ int err;
+ u8 magic, ver;
+ struct device *hwmon_dev;
+ const char *name = "Silocom_Fan_Monitor";
+ //const char *dev_name = "Silicom_platform";
+
+ if (!devm_request_region(&device->dev, MEC_IO_BASE, MEC_IO_LEN, "mec")) {
+ dev_err(&device->dev, "couldn't reserve MEC io ports\n");
+ return -EBUSY;
+ }
+
+ /* Sanity check magic number read for EC */
+ outb(IO_REG_BANK, MEC_ADDR);
+ magic = inb(MEC_DATA_OFFSET(DEFAULT_CHAN_LO));
+ ver = inb(MEC_DATA_OFFSET(DEFAULT_CHAN_HI));
+ dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n", magic, ver);
+
+ if (magic != SILICOM_MEC_MAGIC) {
+ dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
+ return -ENODEV;
+ }
+
+ err = silicom_mc_leds_register(&device->dev, silicom_led_info);
+ if (err) {
+ dev_err(&device->dev, "Failed to register LEDs\n");
+ return err;
+ }
+
+ err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip,
+ silicom_gpio_channels);
+ if (err) {
+ dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
+ return err;
+ }
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&device->dev, name, NULL,
+ &silicom_chip_info, NULL);
+ err = PTR_ERR_OR_ZERO(hwmon_dev);
+ if (err) {
+ dev_err(&device->dev, "Failed to register hwmon_dev: %d\n", err);
+ return err;
+ }
+
+ return err;
+}
+
+static int __init silicom_platform_info_init(const struct dmi_system_id *id)
+{
+ struct silicom_platform_info *info = id->driver_data;
+
+ pr_info("Silicom Platform: Detected %s\n", id->ident);
+
+ silicom_led_info = info->led_info;
+ silicom_gpio_channels = info->gpio_channels;
+ silicom_gpiochip = info->gpiochip;
+ silicom_gpiochip->ngpio = info->ngpio;
+
+ return 1;
+}
+
+static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
+ {
+ .callback = silicom_platform_info_init,
+ .ident = "Silicom Cordoba (Generic)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
+ DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
+ },
+ .driver_data = &silicom_generic_cordoba_info,
+ },
+ {
+ .callback = silicom_platform_info_init,
+ .ident = "Silicom Cordoba (Generic)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
+ DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
+ },
+ .driver_data = &silicom_generic_cordoba_info,
+ },
+ {
+ .callback = silicom_platform_info_init,
+ .ident = "Silicom Cordoba (plat_0222)",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
+ DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
+ },
+ .driver_data = &silicom_plat_0222_cordoba_info,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
+
+static int __init silicom_platform_init(void)
+{
+ if (!dmi_check_system(silicom_dmi_ids)) {
+ pr_err("No DMI match for this platform\n");
+ return -ENODEV;
+ }
+
+ /* Create and register a platform device.
+ * Directly probe the platform driver in init since this isn't a
+ * hotpluggable device. That means we don't need to register a driver
+ * that needs to wait around in memory on the chance a matching device
+ * would get added. Instead run once in __init so that we can free all
+ * those resources when the __init region is wiped
+ */
+ silicom_platform_dev = platform_create_bundle(&silicom_platform_driver,
+ silicom_platform_probe,
+ NULL, 0, NULL, 0);
+
+ return PTR_ERR_OR_ZERO(silicom_platform_dev);
+}
+
+static void __exit silicom_platform_exit(void)
+{
+ platform_device_unregister(silicom_platform_dev);
+ platform_driver_unregister(&silicom_platform_driver);
+}
+
+module_init(silicom_platform_init);
+module_exit(silicom_platform_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Henry Shi <henrys@silicom-usa.com>");
+MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
platform/x86: Add Silicom Platform Driver Add Silicom platform (silicom-platform) Linux driver for Swisscom Business Box (Swisscom BB) as well as Cordoba family products. This platform driver provides support for various functions via the Linux LED framework, GPIO framework, Hardware Monitoring (HWMON) and device attributes. Signed-off-by: Henry Shi <henryshi2018@gmail.com> --- Changes from v1 to v2: =========================== Suggested by Hans de Goede <hdegoede@redhat.com> .Use git send-email to submit patch. .patch contents should be in message body. .Kconfig bit for the driver should be in drivers/platform/x86/Kconfig. changes from patch v2 to v3 =========================== changes suggested by Guenter Roeck <groeck7@gmail.com> .Removed unnecessary include file linux/thermal.h. .Removed EXPORT_SYMBOL for mutex lock/unlock function. Changes suggested by Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> .Remove extra new line in code on multiple position. .Use table instead of space in code. .Uss Linux defined bit operation MACRO define. .Removed local variable in rpm_get(). .Corrected typo in comments. .Corrected incorrect indentation. .Removed unnecessary comments in silicom_mc_leds_register(). .Rewrite efuse_status_show() to used defined variable and removed uncessary local variables. .Rewrite uc_version_show() to used defined variable and removed uncessary local variables. .Removed unused MACRO define: #define CHANNEL_TO_BIT(chan) ((chan) & 0x07). .Rewrite powercycle_uc() to used defined variable and removed uncessary local variables. .use GENMASK() and use FIELD_GET() instead of bit shift. .Added define for constant 0x28 used in efuse_status_show(). .Added define for constant 0x0 used in uc_version_show(). .Added define for constant 0x0 used in powercycle_uc(). .Rearrange functions to avoid uncessary pre-define. .Rewrite rpm_get() to used defined variable and removed uncessary local variables. .Rewrite temp_get() to used defined variable and removed uncessary local variables. .Use FIELD_GET instead of bit shift in temp_get(). .Used #define for constant variable 0/1. Changes suggested by Christophe JAILLET <christophe.jaillet@wanadoo.fr>: .use "if (!led->subled_info)" instead of "if (IS_ERR_OR_NULL(led->subled_info)) "in silicom_mc_leds_register changes from patch v3 to v4 =========================== changes suggested by Guenter Roeck <groeck7@gmail.com> Changes suggested by Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>: .Rewrite silicom_mec_led/gpip_set/get() functions to use two newly created silicom_mec_port_get()/silicom_mec_port_set() which have common code. .Remove duplicate code in silicom_mec_port_get() .Rewrite uc_version_show() to use Linux bit operation MACRO, and add logic to check un-supported register value. .Added "#define MEC_EFUSE_LSB_ADDR 0x28" and "#define MEC_POWER_CYCLE_ADDR 0x24" .Added "#define MEC_VERSION_MAJOR GENMASK(15, 14)" and "#define MEC_VERSION_MINOR GENMASK(13, 8)". Changes suggested by Christophe JAILLET <christophe.jaillet@wanadoo.fr>: .Used a local variable to store "sizeof(struct mc_subled)" in function silicom_mc_leds_register(). change from patch v4 to v5 =========================================== changes suggested by Guenter Roeck <groeck7@gmail.com>: .Corrected return value in temp_get() to return 1/10000th degree. .Removed local variable struct silicom_fan_control_data *ctl in silicom_fan_control_read_fan(), removed storing rpm value to ctl variable. .Removed local variable struct silicom_fan_control_data *ctl in silicom_fan_control_read_temp(), .removed storing rpm value to ctl variable. .Changed return string in silicom_fan_control_read_labels() to specific string for Silicom platform driver. .Removed silicom_fan_control_data structure. .Removed static variable mec_io_base and mec_io_len, and added "#define MEC_IO_BASE 0x0800 and #define MEC_IO_LEN 0x8". .Removed ".write = NULL" in silicom_fan_control_hwmon_ops structure defination. .Removed unnecessary function silicom_fan_control_write(). .Removed unnecessary check for silicom_led_info in function silicom_platform_probe. .Removed unnecessary local variable "silicom_fan_control_data *ctl" in silicom_platform_probe(). .Clean out driver initialization error handling in silicom_platform_init(); .Add patch version and changelog for patch submission. Changes suggested by Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>: .Rename "#define MEC_DATA(offset) to "#define MEC_DATA_OFFSET(offset). .Use constant defined in include/linux/units.h instead of a literal. .return directly instead of go to err condition when platform_device_register_simple() failed. .Remove unnecessary check for silicom_led_info and silicom_gpiochip. .Use a local variable to how multiple use of array size. .Align the arguments to the same column in silicom_mec_led_mc_brightness_set. .Add patch version and changelog that shows version to version changes for patch submission. Changes suggested by Christophe JAILLET <christophe.jaillet@wanadoo.fr>: .Use "sizeof(*led)" instead of "sizeof(struct led_classdev_mc)" .Use "if (!led)" instead of "if (IS_ERR_OR_NULL(led))" .Removed unnecessary error message: "dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led)). change from patch vv5 to v6 =========================================== changes suggested by Guenter Roeck <groeck7@gmail.com>: .Removed checkpath warnings. .Resoved dependencies between CONFIG_HWMON and CONFIG_SILICOM_PLATFORM. change from patch v6 to v7 =========================================== changes suggested by Hans de Goede <hdegoede@redhat.com>: .Usa a proper subsystem prefix for this patch subject: Subject: platform/x86: Add Silicom Platform Driver. change from patch v7 to v8 (current patch) =========================================== changes suggested by Hans de Goede <hdegoede@redhat.com>: .Chnage commit message of this driver. .Adjust location of change log and signed-off-by. .Change "config SILICOM_PLATFORM" and help contents location, and put it to source "drivers/platform/x86/siemens/Kconfig". .Set editor tab to 8 and align the start of extra function parameters to directly after (. This should be applied for all function. .Do not manually create a sysfs dir and register sysfs attribute, instead define a platform_driver structure. .Move MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids) directly after table declaration. .Using pr_info() instead of dev_info() in function silicom_platform_info_init(). .Made dmi_check_system() check the first thing to do in silicom_platform_init(). .Instead of separate platform_device creation + driver registration, switched to using platform_create_bundle(). .Removed mutex_destroy(&mec_io_mutex). Changes suggested by Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>: .Too many GENMASK() within to code itself, need put them to #define. Removed all GENMASK() in c functions. drivers/platform/x86/Kconfig | 14 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/silicom-platform.c | 1001 +++++++++++++++++++++++ 3 files changed, 1016 insertions(+) create mode 100644 drivers/platform/x86/silicom-platform.c