From patchwork Tue Dec 5 07:47:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Cosmo Chou X-Patchwork-Id: 13479521 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="ZSQOuTqI" Received: from mail-oi1-x233.google.com (mail-oi1-x233.google.com [IPv6:2607:f8b0:4864:20::233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 507C3134; Mon, 4 Dec 2023 23:49:25 -0800 (PST) Received: by mail-oi1-x233.google.com with SMTP id 5614622812f47-3b9b8522d91so981922b6e.0; Mon, 04 Dec 2023 23:49:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1701762564; x=1702367364; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=5BLWRQU7e2ks4OA6ZEmVZgby82HFHiFIto+WZbyqHV8=; b=ZSQOuTqIVACsjF7mxAozUJMRgcuR9DLzyqjpkh1AFu1zPDcUe9YrBLwZC5nVbLMh8U pvnld+z2EZg+IfZ9zPkPa54iqNy+0J/PBmSBAr/ldBZC3vJ2DPig6Zv4HYsPka1TaLke PDxZRgF2x4dlelOxc7Vh5kKlhmOM0CCDl3FTIhkFK2G1gCUIPgirSy6AHDkrl5iD5WPz zLxOm1v8AzXftDg09o15sHBMaPDoQIgcd54TmUBSlN59aImDBIHDvtbBNj7foRoUFuPc QMOOf3E2om40jBTBwUC325CFEyQfbMwc7/h6IsqDEv3AKDgOqlN8TjFIznY89RE9PYGf st1A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1701762564; x=1702367364; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=5BLWRQU7e2ks4OA6ZEmVZgby82HFHiFIto+WZbyqHV8=; b=B5m6J/JkAZfb2znH4Axv01m3YCsGy0Me0NkQDn3b+wvAu/hwwjHmrgD51TSZx8wJjk m/ODl1TQfSywVmiWn7kyQYYyHgx8v2KHhkWBb30NPssDaGV9J0hMS6CVKmaozKmPKq6j 2L4u6k89TYRQuMqd6Oj1Yb9zpjJEk0uZ9j0DFkXWWg7JjkoA3n8kt7bbFhYhqKNsxVO7 bvXTImU9I2bBzm/u/knGSHbU9oe/wdfzkqbqT2pnlaOtMKHRaA8xrub7C5dO6zIO9lCY KXGfCN67CPnnNDzEPT3x+Yr8h4CiwNZ/WFna76rHm/y8g+0mYmFlGufBLkSTn8TI28g4 gu3Q== X-Gm-Message-State: AOJu0YwAQPOTibyl7A6bymvq2WtJzIpFtesCNNbvPm+57b3u+RF6YYW9 63Pnj20xY9L+tyxAACbNVao= X-Google-Smtp-Source: AGHT+IECqJgTRaJeqghoPO27gsrGckZGXi+FtW2ydQLEvRIBjTr6cTt/rVwwuyB0U/z+KWS7YClp4Q== X-Received: by 2002:a05:6808:1489:b0:3b8:b063:6b9b with SMTP id e9-20020a056808148900b003b8b0636b9bmr6860761oiw.74.1701762564447; Mon, 04 Dec 2023 23:49:24 -0800 (PST) Received: from cosmo-ubuntu-2204.dhcpserver.bu9bmc.local (1-34-21-66.hinet-ip.hinet.net. [1.34.21.66]) by smtp.gmail.com with ESMTPSA id k3-20020aa79983000000b006ce54e08b6asm2582529pfh.203.2023.12.04.23.49.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 04 Dec 2023 23:49:24 -0800 (PST) From: Cosmo Chou To: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, corbet@lwn.net, heiko@sntech.de, jernej.skrabec@gmail.com, macromorgan@hotmail.com, linus.walleij@linaro.org Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, chou.cosmo@gmail.com, cosmo.chou@quantatw.com Subject: [PATCH 3/3] hwmon: Add driver for Astera Labs PT516XX retimer Date: Tue, 5 Dec 2023 15:47:23 +0800 Message-Id: <20231205074723.3546295-4-chou.cosmo@gmail.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20231205074723.3546295-1-chou.cosmo@gmail.com> References: <20231205074723.3546295-1-chou.cosmo@gmail.com> Precedence: bulk X-Mailing-List: linux-hwmon@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This driver implements support for temperature monitoring of Astera Labs PT5161L series PCIe retimer chips. This driver implementation originates from the CSDK available at Link: https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14 The communication protocol utilized is based on the I2C/SMBus standard. Signed-off-by: Cosmo Chou --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/pt516xx.rst | 48 +++ MAINTAINERS | 8 + drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/pt516xx.c | 648 ++++++++++++++++++++++++++++++++ 6 files changed, 716 insertions(+) create mode 100644 Documentation/hwmon/pt516xx.rst create mode 100644 drivers/hwmon/pt516xx.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 72f4e6065bae..2c4df18db663 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -181,6 +181,7 @@ Hardware Monitoring Kernel Drivers pmbus powerz powr1220 + pt516xx pxe1610 pwm-fan q54sj108a2 diff --git a/Documentation/hwmon/pt516xx.rst b/Documentation/hwmon/pt516xx.rst new file mode 100644 index 000000000000..945194f9a804 --- /dev/null +++ b/Documentation/hwmon/pt516xx.rst @@ -0,0 +1,48 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver pt516xx +==================== + +Supported chips: + + * Astera Labs PT5161L + + Prefix: 'pt5161l' + + Addresses: I2C 0x24 + + Datasheet: http://www.asteralabs.com/wp-content/uploads/2021/03/Astera_Labs_PT5161L_Product_Brief.pdf + +Authors: Cosmo Chou + +Description +----------- + +This driver implements support for temperature monitoring of Astera Labs +PT5161L series PCIe retimer chips. + +This driver implementation originates from the CSDK available at +https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14 +The communication protocol utilized is based on the I2C/SMBus standard. + +For more detailed information and specific implementation details, it is +recommended to refer to the CSDK source code available at the provided GitHub +link. + +Sysfs entries +---------------- + +================ ============================================== +temp1_input Measured temperature (in millidegrees Celsius) +================ ============================================== + +Debugfs entries +---------------- + +================ ==================================== +fw_ver Firmware version of the retimer +health Health status (8 bits) + [0]: Heartbeat Okay (1'b1: OK) + [1]: Firmware loaded Okay (1'b1: OK) + [7:2]: Reserved +================ ==================================== diff --git a/MAINTAINERS b/MAINTAINERS index 788be9ab5b73..492002ffd12c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17482,6 +17482,14 @@ F: fs/pstore/ F: include/linux/pstore* K: \b(pstore|ramoops) +PT516XX HARDWARE MONITOR DRIVER +M: Cosmo Chou +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/hwmon/asteralabs,pt516xx.yaml +F: Documentation/hwmon/pt516xx.rst +F: drivers/hwmon/pt516xx.c + PTP HARDWARE CLOCK SUPPORT M: Richard Cochran L: netdev@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index cf27523eed5a..3965bec7774a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1703,6 +1703,16 @@ source "drivers/hwmon/peci/Kconfig" source "drivers/hwmon/pmbus/Kconfig" +config SENSORS_PT516XX + tristate "Astera Labs PT516XX PCIe retimer hardware monitoring" + depends on I2C + help + If you say yes here you get support for temperature monitoring + on the Astera Labs PT516XX PCIe retimer. + + This driver can also be built as a module. If so, the module + will be called pt516xx. + config SENSORS_PWM_FAN tristate "PWM fan" depends on (PWM && OF) || COMPILE_TEST diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index e84bd9685b5c..1942064cd4e9 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -179,6 +179,7 @@ obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_POWERZ) += powerz.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o +obj-$(CONFIG_SENSORS_PT516XX) += pt516xx.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o diff --git a/drivers/hwmon/pt516xx.c b/drivers/hwmon/pt516xx.c new file mode 100644 index 000000000000..824798559fe1 --- /dev/null +++ b/drivers/hwmon/pt516xx.c @@ -0,0 +1,648 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** Main-micro-assisted access command codes */ +// Wide register reads +#define ARIES_MM_RD_WIDE_REG_2B 0x1d +#define ARIES_MM_RD_WIDE_REG_3B 0x1e +#define ARIES_MM_RD_WIDE_REG_4B 0x1f +#define ARIES_MM_RD_WIDE_REG_5B 0x20 +// Wide register writes +#define ARIES_MM_WR_WIDE_REG_2B 0x21 +#define ARIES_MM_WR_WIDE_REG_3B 0x22 +#define ARIES_MM_WR_WIDE_REG_4B 0x23 +#define ARIES_MM_WR_WIDE_REG_5B 0x24 + +/** Temperature measurement constants */ +// Aries current average temp ADC code CSR +#define ARIES_CURRENT_AVG_TEMP_ADC_CSR 0x42c + +// Main Micro Heartbeat reg +#define ARIES_MM_HEARTBEAT_ADDR 0x923 + +/** Main SRAM */ +// AL Main SRAM DMEM offset (A0) +#define AL_MAIN_SRAM_DMEM_OFFSET (64 * 1024) +// SRAM read command +#define AL_TG_RD_LOC_IND_SRAM 0x16 + +/** Micros */ +// Offset for main micro FW info +#define ARIES_MAIN_MICRO_FW_INFO (96 * 1024 - 128) + +/** Path Micro Members */ +// FW Info (Major) offset location in struct +#define ARIES_MM_FW_VERSION_MAJOR 0 +// FW Info (Minor) offset location in struct +#define ARIES_MM_FW_VERSION_MINOR 1 +// FW Info (Build no.) offset location in struct +#define ARIES_MM_FW_VERSION_BUILD 2 + +/** Offsets for MM assisted accesses */ +// Legacy Address and Data registers (using wide registers) +// Reg offset to specify Address for MM assisted accesses +#define ARIES_MM_ASSIST_REG_ADDR_OFFSET 0xd99 +// Reg offset to specify Command +#define ARIES_MM_ASSIST_CMD_OFFSET 0xd9d + +// New Address and Data registers (not using wide registers) +// Reg offset to MM SPARE 0 used specify Address[7:0] +#define ARIES_MM_ASSIST_SPARE_0_OFFSET 0xd9f +// Reg offset to MM SPARE 3 used specify Data Byte 0 +#define ARIES_MM_ASSIST_SPARE_3_OFFSET 0xda2 + +/** Misc block offsets */ +// Device Load check register +#define ARIES_CODE_LOAD_REG 0x605 + +/** Value indicating FW was loaded properly */ +#define ARIES_LOAD_CODE 0xe + +/** EEPROM parameters */ +// Time delay between checking MM status of EEPROM write (microseconds) +#define ARIES_MM_STATUS_TIME 5000 + +#define ARIES_TEMP_CAL_CODE_DEFAULT 84 + +/* Struct defining FW version loaded on an Aries device */ +struct pt516xx_fw_ver { + u8 major; // FW version major release value + u8 minor; // FW version minor release value + u16 build; // FW version build release value +}; + +/* Each client has this additional data */ +struct pt516xx_data { + struct i2c_client *client; + struct dentry *debugfs; + struct pt516xx_fw_ver fw_ver; + struct mutex lock; + bool init_done; + bool pec_enable; // Enable PEC + bool code_load_okay; // indicate if code load reg value is expected + bool mm_heartbeat_okay; // indicate if Main Micro heartbeat is good + bool mm_wide_reg_valid; // MM assisted Wide Register access + u8 temp_cal_code_avg; +}; + +static struct dentry *pt516xx_debugfs_dir; + +/* + * Write multiple data bytes to Aries over I2C + */ +static int pt516xx_write_block_data(struct pt516xx_data *data, u32 address, + u8 len, u8 *val) +{ + struct i2c_client *client = data->client; + int ret; + u8 remain_len = len; + u8 xfer_len, curr_len; + u8 buf[16]; + u8 cmd = 0x0F; // [7]:pec_en, [6:5]:rsvd, [4:2]:func, [1]:start, [0]:end + u8 config = 0x40; // [6]:cfg_type, [4:1]:burst_len, [0]:bit16 of address + + if (data->pec_enable) + cmd |= 0x80; + + // If byte count is greater than 4, perform multiple iterations + while (remain_len > 0) { + if (remain_len > 4) { + curr_len = 4; + remain_len -= 4; + } else { + curr_len = remain_len; + remain_len = 0; + } + + buf[0] = config | (curr_len - 1) << 1 | ((address >> 16) & 0x1); + buf[1] = (address >> 8) & 0xff; + buf[2] = address & 0xff; + memcpy(&buf[3], val, curr_len); + + xfer_len = 3 + curr_len; + ret = i2c_smbus_write_block_data(client, cmd, xfer_len, buf); + if (ret) + return ret; + + val += curr_len; + address += curr_len; + } + + return 0; +} + +/* + * Read multiple data bytes from Aries over I2C + */ +static int pt516xx_read_block_data(struct pt516xx_data *data, u32 address, + u8 len, u8 *val) +{ + struct i2c_client *client = data->client; + int ret, tries; + u8 remain_len = len; + u8 curr_len; + u8 wbuf[16], rbuf[24]; + u8 cmd = 0x08; // [7]:pec_en, [6:5]:rsvd, [4:2]:func, [1]:start, [0]:end + u8 config = 0x00; // [6]:cfg_type, [4:1]:burst_len, [0]:bit16 of address + + if (data->pec_enable) + cmd |= 0x80; + + // If byte count is greater than 16, perform multiple iterations + while (remain_len > 0) { + if (remain_len > 16) { + curr_len = 16; + remain_len -= 16; + } else { + curr_len = remain_len; + remain_len = 0; + } + + wbuf[0] = config | (curr_len - 1) << 1 | + ((address >> 16) & 0x1); + wbuf[1] = (address >> 8) & 0xff; + wbuf[2] = address & 0xff; + + // Perform read operation + for (tries = 0; tries < 3; tries++) { + ret = i2c_smbus_write_block_data(client, (cmd | 0x2), 3, + wbuf); + if (ret) + return ret; + + ret = i2c_smbus_read_block_data(client, (cmd | 0x1), + rbuf); + if (ret == curr_len) + break; + } + if (tries >= 3) + return -ENODATA; + + memcpy(val, rbuf, curr_len); + val += curr_len; + address += curr_len; + } + + return 0; +} + +static int pt516xx_read_wide_reg(struct pt516xx_data *data, u32 address, + u8 width, u8 *val) +{ + int ret, tries; + u8 buf[8]; + u8 status; + + if (data->mm_wide_reg_valid) { + // Write address (3 bytes) + buf[0] = address & 0xff; + buf[1] = (address >> 8) & 0xff; + buf[2] = (address >> 16) & 0x1; + ret = pt516xx_write_block_data( + data, ARIES_MM_ASSIST_SPARE_0_OFFSET, 3, buf); + if (ret) + return ret; + + // Set command based on width + switch (width) { + case 2: + buf[0] = ARIES_MM_RD_WIDE_REG_2B; + break; + case 3: + buf[0] = ARIES_MM_RD_WIDE_REG_3B; + break; + case 4: + buf[0] = ARIES_MM_RD_WIDE_REG_4B; + break; + case 5: + buf[0] = ARIES_MM_RD_WIDE_REG_5B; + break; + default: + return -EINVAL; + } + ret = pt516xx_write_block_data(data, ARIES_MM_ASSIST_CMD_OFFSET, + 1, buf); + if (ret) + return ret; + + // Check access status + status = 0xff; + for (tries = 0; tries < 100; tries++) { + ret = pt516xx_read_block_data( + data, ARIES_MM_ASSIST_CMD_OFFSET, 1, &status); + if (ret) + return ret; + + if (status == 0) + break; + + usleep_range(ARIES_MM_STATUS_TIME, + ARIES_MM_STATUS_TIME + 1000); + } + if (status != 0) + return -ETIMEDOUT; + + // Read N bytes of data based on width + ret = pt516xx_read_block_data( + data, ARIES_MM_ASSIST_SPARE_3_OFFSET, width, val); + if (ret) + return ret; + } else { + return pt516xx_read_block_data(data, address, width, val); + } + + return 0; +} + +/* + * Read multiple (up to eight) data bytes from micro SRAM over I2C + */ +static int +pt516xx_read_block_data_main_micro_indirect(struct pt516xx_data *data, + u32 address, u8 len, u8 *val) +{ + int ret, tries; + u8 buf[8]; + u8 i, status; + u32 uind_offs = ARIES_MM_ASSIST_REG_ADDR_OFFSET; + u32 eeprom_base, eeprom_addr; + + // No multi-byte indirect support here. Hence read a byte at a time + eeprom_base = address - AL_MAIN_SRAM_DMEM_OFFSET; + for (i = 0; i < len; i++) { + // Write eeprom addr + eeprom_addr = eeprom_base + i; + buf[0] = eeprom_addr & 0xff; + buf[1] = (eeprom_addr >> 8) & 0xff; + buf[2] = (eeprom_addr >> 16) & 0xff; + ret = pt516xx_write_block_data(data, uind_offs, 3, buf); + if (ret) + return ret; + + // Write eeprom cmd + buf[0] = AL_TG_RD_LOC_IND_SRAM; + ret = pt516xx_write_block_data(data, uind_offs + 4, 1, buf); + if (ret) + return ret; + + // Test successful access + status = 0xff; + for (tries = 0; tries < 255; tries++) { + ret = pt516xx_read_block_data(data, uind_offs + 4, 1, + &status); + if (ret) + return ret; + + if (status == 0) + break; + } + if (status != 0) + return -ETIMEDOUT; + + ret = pt516xx_read_block_data(data, uind_offs + 3, 1, buf); + if (ret) + return ret; + + val[i] = buf[0]; + } + + return 0; +} + +/* + * Check the status of firmware + */ +static int pt516xx_fwsts_check(struct pt516xx_data *data) +{ + int ret, tries; + u8 buf[8]; + u8 heartbeat, major = 0, minor = 0; + u16 build = 0; + bool hb_changed = false; + + // Read Code Load reg + ret = pt516xx_read_block_data(data, ARIES_CODE_LOAD_REG, 1, buf); + if (ret) + return ret; + + if (buf[0] < ARIES_LOAD_CODE) { + dev_warn( + &data->client->dev, + "Code Load reg unexpected. Not all modules are loaded %x\n", + buf[0]); + data->code_load_okay = false; + } else { + data->code_load_okay = true; + } + + // Check Main Micro heartbeat + // If heartbeat value does not change for 100 tries, no MM heartbeat + // Else heartbeat present even if one value changes + ret = pt516xx_read_block_data(data, ARIES_MM_HEARTBEAT_ADDR, 1, buf); + if (ret) + return ret; + + heartbeat = buf[0]; + for (tries = 0; tries < 100; tries++) { + ret = pt516xx_read_block_data(data, ARIES_MM_HEARTBEAT_ADDR, 1, + buf); + if (ret) + return ret; + + if (buf[0] != heartbeat) { + hb_changed = true; + break; + } + } + data->mm_heartbeat_okay = hb_changed; + + // Read FW version + // If heartbeat not there, set default FW values to 0.0.0 + // and return success + if (data->mm_heartbeat_okay) { + // Get FW version (major) + ret = pt516xx_read_block_data_main_micro_indirect( + data, + ARIES_MAIN_MICRO_FW_INFO + ARIES_MM_FW_VERSION_MAJOR, 1, + &major); + if (ret) + return ret; + + // Get FW version (minor) + ret = pt516xx_read_block_data_main_micro_indirect( + data, + ARIES_MAIN_MICRO_FW_INFO + ARIES_MM_FW_VERSION_MINOR, 1, + &minor); + if (ret) + return ret; + + // Get FW version (build) + ret = pt516xx_read_block_data_main_micro_indirect( + data, + ARIES_MAIN_MICRO_FW_INFO + ARIES_MM_FW_VERSION_BUILD, 2, + (u8 *)&build); + if (ret) + return ret; + } else { + dev_warn(&data->client->dev, "No Main Micro Heartbeat\n"); + } + data->fw_ver.major = major; + data->fw_ver.minor = minor; + data->fw_ver.build = build; + + return 0; +} + +static int pt516xx_fw_is_at_least(struct pt516xx_data *data, u8 major, u8 minor, + u16 build) +{ + u32 ver = major << 24 | minor << 16 | build; + u32 curr_ver = data->fw_ver.major << 24 | data->fw_ver.minor << 16 | + data->fw_ver.build; + + if (curr_ver >= ver) + return true; + + return false; +} + +static int pt516xx_init_dev(struct pt516xx_data *data) +{ + int ret; + + mutex_lock(&data->lock); + ret = pt516xx_fwsts_check(data); + mutex_unlock(&data->lock); + if (ret) + return ret; + + dev_info(&data->client->dev, "fw_ver: %u.%u.%u\n", data->fw_ver.major, + data->fw_ver.minor, data->fw_ver.build); + + if (pt516xx_fw_is_at_least(data, 2, 2, 0)) + data->mm_wide_reg_valid = true; + + data->temp_cal_code_avg = ARIES_TEMP_CAL_CODE_DEFAULT; + data->init_done = true; + + return 0; +} + +static int pt516xx_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct pt516xx_data *data = dev_get_drvdata(dev); + int ret = 0; + long adc_code = 0; + + if (!data->init_done) { + ret = pt516xx_init_dev(data); + if (ret) { + dev_err(dev, "pt516xx_init_dev failed %d\n", ret); + return ret; + } + } + + switch (attr) { + case hwmon_temp_input: + mutex_lock(&data->lock); + ret = pt516xx_read_wide_reg(data, + ARIES_CURRENT_AVG_TEMP_ADC_CSR, 4, + (u8 *)&adc_code); + mutex_unlock(&data->lock); + break; + default: + return -EOPNOTSUPP; + } + if (ret) { + dev_err(dev, "Read adc_code failed %d\n", ret); + return ret; + } + if (adc_code == 0 || adc_code >= 0x3ff) { + dev_err(dev, "Invalid adc_code %lx\n", adc_code); + return -EINVAL; + } + + *val = 110000 + ((adc_code - (data->temp_cal_code_avg + 250)) * -320); + + return 0; +} + +static umode_t pt516xx_is_visible(const void *data, + enum hwmon_sensor_types type, u32 attr, + int channel) +{ + switch (attr) { + case hwmon_temp_input: + return 0444; + default: + break; + } + + return 0; +} + +static const struct hwmon_channel_info *pt516xx_info[] = { + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static const struct hwmon_ops pt516xx_hwmon_ops = { + .is_visible = pt516xx_is_visible, + .read = pt516xx_read, +}; + +static const struct hwmon_chip_info pt516xx_chip_info = { + .ops = &pt516xx_hwmon_ops, + .info = pt516xx_info, +}; + +static ssize_t pt516xx_debugfs_read_fw_ver(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct pt516xx_data *data = file->private_data; + int ret; + char ver[32]; + + mutex_lock(&data->lock); + ret = pt516xx_fwsts_check(data); + mutex_unlock(&data->lock); + if (ret) + return ret; + + ret = snprintf(ver, sizeof(ver), "%u.%u.%u\n", data->fw_ver.major, + data->fw_ver.minor, data->fw_ver.build); + if (ret < 0) + return ret; + + return simple_read_from_buffer(buf, count, ppos, ver, ret + 1); +} + +static const struct file_operations pt516xx_debugfs_ops_fw_ver = { + .read = pt516xx_debugfs_read_fw_ver, + .open = simple_open, +}; + +static ssize_t pt516xx_debugfs_read_health(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct pt516xx_data *data = file->private_data; + int ret; + u8 status = 0; + char health[8]; + + mutex_lock(&data->lock); + ret = pt516xx_fwsts_check(data); + mutex_unlock(&data->lock); + if (ret == 0) { + status |= data->mm_heartbeat_okay ? 1 : 0; // bit0 + status |= data->code_load_okay ? 2 : 0; // bit1 + } + + ret = snprintf(health, sizeof(health), "0x%02x\n", status); + if (ret < 0) + return ret; + + return simple_read_from_buffer(buf, count, ppos, health, ret + 1); +} + +static const struct file_operations pt516xx_debugfs_ops_health = { + .read = pt516xx_debugfs_read_health, + .open = simple_open, +}; + +static int pt516xx_init_debugfs(struct pt516xx_data *data) +{ + if (!pt516xx_debugfs_dir) + return -ENOENT; + + data->debugfs = debugfs_create_dir(dev_name(&data->client->dev), + pt516xx_debugfs_dir); + if (IS_ERR_OR_NULL(data->debugfs)) + return -ENOENT; + + debugfs_create_file("fw_ver", 0444, data->debugfs, data, + &pt516xx_debugfs_ops_fw_ver); + + debugfs_create_file("health", 0444, data->debugfs, data, + &pt516xx_debugfs_ops_health); + + return 0; +} + +static int pt516xx_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct pt516xx_data *data; + + data = devm_kzalloc(dev, sizeof(struct pt516xx_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->lock); + pt516xx_init_dev(data); + + hwmon_dev = devm_hwmon_device_register_with_info( + dev, client->name, data, &pt516xx_chip_info, NULL); + + if (pt516xx_init_debugfs(data)) + dev_warn(dev, "Failed to register debugfs\n"); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id pt516xx_id[] = { + { "pt5161l", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, pt516xx_id); + +static const struct of_device_id __maybe_unused pt516xx_of_match[] = { + { .compatible = "asteralabs,pt5161l" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pt516xx_of_match); + +static struct i2c_driver pt516xx_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "pt516xx", + .of_match_table = of_match_ptr(pt516xx_of_match), + }, + .probe = pt516xx_probe, + .id_table = pt516xx_id, +}; + +module_i2c_driver(pt516xx_driver); + +static int __init pt516xx_core_init(void) +{ + pt516xx_debugfs_dir = debugfs_create_dir("pt516xx", NULL); + if (IS_ERR(pt516xx_debugfs_dir)) + pt516xx_debugfs_dir = NULL; + + return 0; +} + +static void __exit pt516xx_core_exit(void) +{ + debugfs_remove_recursive(pt516xx_debugfs_dir); +} + +module_init(pt516xx_core_init); +module_exit(pt516xx_core_exit); + +MODULE_AUTHOR("Cosmo Chou "); +MODULE_DESCRIPTION("Hwmon driver for Astera Labs Aries PCIe retimer"); +MODULE_LICENSE("GPL");