Message ID | 20240127154844.989-1-aladyshev22@gmail.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data' | expand |
On Sat, Jan 27, 2024 at 06:48:44PM +0300, Konstantin Aladyshev wrote: > The current driver code no longer perfrom internal conversion from > VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL. > Correct the comment message inside the 'mp2975_read_byte_data' > function to comply with the driver logic. > > Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Applied. Thanks, Guenter
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c index 5bbfdacb61a7..e5fa10b3b8bc 100644 --- a/drivers/hwmon/pmbus/mp2975.c +++ b/drivers/hwmon/pmbus/mp2975.c @@ -131,10 +131,9 @@ static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg) switch (reg) { case PMBUS_VOUT_MODE: /* - * Enforce VOUT direct format, since device allows to set the - * different formats for the different rails. Conversion from - * VID to direct provided by driver internally, in case it is - * necessary. + * Report direct format as configured by MFR_DC_LOOP_CTRL. + * Unlike on MP2971/MP2973 the reported VOUT_MODE isn't automatically + * internally updated, but always reads as PB_VOUT_MODE_VID. */ return PB_VOUT_MODE_DIRECT; default:
The current driver code no longer perfrom internal conversion from VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL. Correct the comment message inside the 'mp2975_read_byte_data' function to comply with the driver logic. Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> --- drivers/hwmon/pmbus/mp2975.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)