diff mbox series

[v2,1/5] dt-bindings: hwmon/pmbus: ti,lm25066: document regulators

Message ID 20240223-tingling-mutt-dd55dd87ff5e@spud (mailing list archive)
State Accepted
Headers show
Series PMBUS Regulator cleanups | expand

Commit Message

Conor Dooley Feb. 23, 2024, 4:21 p.m. UTC 
From: Conor Dooley <conor.dooley@microchip.com>

All devices documented in the lm25066 binding are intended for use with
a regulator, be that for purely monitoring purposes (lm25056) or, for
the other devices, as the controller of that regulator. The binding does
not currently allow regulator child nodes, so add one.

Each of these devices interacts with only a single regulator and
documentation refers to it as "Vout", hence the choice of child node
name.

Acked-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml  | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Krzysztof Kozlowski Feb. 24, 2024, 11:13 a.m. UTC | #1 
On 23/02/2024 17:21, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> All devices documented in the lm25066 binding are intended for use with
> a regulator, be that for purely monitoring purposes (lm25056) or, for
> the other devices, as the controller of that regulator. The binding does
> not currently allow regulator child nodes, so add one.
> 
> Each of these devices interacts with only a single regulator and
> documentation refers to it as "Vout", hence the choice of child node
> name.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
index da8292bc32f5..4373e9c86e54 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -34,6 +34,18 @@  properties:
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg