[09/10] hwmon: (amc6821) Convert to use regmap

Message ID	20240628151346.1152838-10-linux@roeck-us.net (mailing list archive)
State	New
Headers	show Received: from mail-pl1-f175.google.com (mail-pl1-f175.google.com [209.85.214.175]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3E64E1CB329; Fri, 28 Jun 2024 15:14:08 +0000 (UTC) Sender: Guenter Roeck <groeck7@gmail.com> From: Guenter Roeck <linux@roeck-us.net> To: linux-hwmon@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Farouk Bouabid <farouk.bouabid@cherry.de>, Quentin Schulz <quentin.schulz@cherry.de>, Guenter Roeck <linux@roeck-us.net> Subject: [PATCH 09/10] hwmon: (amc6821) Convert to use regmap Date: Fri, 28 Jun 2024 08:13:45 -0700 Message-Id: <20240628151346.1152838-10-linux@roeck-us.net> In-Reply-To: <20240628151346.1152838-1-linux@roeck-us.net> References: <20240628151346.1152838-1-linux@roeck-us.net> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	hwmon: (amc6821) Various improvements \| expand [00/10] hwmon: (amc6821) Various improvements [01/10] hwmon: (amc6821) Stop accepting invalid pwm values [02/10] hwmon: (amc6821) Make reading and writing fan speed limits consistent [03/10] hwmon: (amc6821) Rename fan1_div to fan1_pulses [04/10] hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4 [05/10] hwmon: (amc2821) Reorder include files, drop unnecessary ones [06/10] hwmon: (amc6821) Use tabs for column alignment in defines [07/10] hwmon: (amc2821) Use BIT() and GENMASK() [08/10] hwmon: (amc6821) Drop unnecessary enum chips [09/10] hwmon: (amc6821) Convert to use regmap [10/10] hwmon: (amc6821) Convert to with_info API

diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index ebffc9393c3d..6ffab4288134 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -14,9 +14,9 @@ #include <linux/hwmon-sysfs.h> #include <linux/i2c.h> #include <linux/init.h> -#include <linux/jiffies.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/regmap.h> #include <linux/slab.h> /* @@ -44,6 +44,7 @@ module_param(init, int, 0444); #define AMC6821_REG_CONF4 0x04 #define AMC6821_REG_STAT1 0x02 #define AMC6821_REG_STAT2 0x03 +#define AMC6821_REG_TEMP_LO 0x06 #define AMC6821_REG_TDATA_LOW 0x08 #define AMC6821_REG_TDATA_HI 0x09 #define AMC6821_REG_LTEMP_HI 0x0A @@ -61,11 +62,8 @@ module_param(init, int, 0444); #define AMC6821_REG_DCY_LOW_TEMP 0x21 #define AMC6821_REG_TACH_LLIMITL 0x10 -#define AMC6821_REG_TACH_LLIMITH 0x11 #define AMC6821_REG_TACH_HLIMITL 0x12 -#define AMC6821_REG_TACH_HLIMITH 0x13 #define AMC6821_REG_TACH_SETTINGL 0x1e -#define AMC6821_REG_TACH_SETTINGH 0x1f #define AMC6821_CONF1_START BIT(0) #define AMC6821_CONF1_FAN_INT_EN BIT(1) @@ -73,7 +71,7 @@ module_param(init, int, 0444); #define AMC6821_CONF1_PWMINV BIT(3) #define AMC6821_CONF1_FAN_FAULT_EN BIT(4) #define AMC6821_CONF1_FDRC0 BIT(5) -#define AMC6821_CONF1_FDRC1 BIT(7) +#define AMC6821_CONF1_FDRC1 BIT(6) #define AMC6821_CONF1_THERMOVIE BIT(7) #define AMC6821_CONF2_PWM_EN BIT(0) @@ -130,224 +128,170 @@ static const u8 fan_reg_low[] = {AMC6821_REG_TDATA_LOW, AMC6821_REG_TACH_HLIMITL, AMC6821_REG_TACH_SETTINGL, }; -static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, - AMC6821_REG_TACH_LLIMITH, - AMC6821_REG_TACH_HLIMITH, - AMC6821_REG_TACH_SETTINGH, }; - /* * Client data (each client gets its own) */ struct amc6821_data { - struct i2c_client *client; + struct regmap *regmap; struct mutex update_lock; - bool valid; /* false until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - /* register values */ - int temp[TEMP_IDX_LEN]; - - u16 fan[FAN1_IDX_LEN]; - u8 fan1_pulses; - - u8 pwm1; u8 temp1_auto_point_temp[3]; u8 temp2_auto_point_temp[3]; - u8 pwm1_auto_point_pwm[3]; - u8 pwm1_enable; - u8 pwm1_auto_channels_temp; - - u8 stat1; - u8 stat2; }; -static struct amc6821_data *amc6821_update_device(struct device *dev) +static int amc6821_init_auto_point_data(struct amc6821_data *data) { - struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int timeout = HZ; - u8 reg; - int i; + struct regmap *regmap = data->regmap; + u32 pwm, regval; + int err; - mutex_lock(&data->update_lock); + err = regmap_read(regmap, AMC6821_REG_DCY_LOW_TEMP, &pwm); + if (err) + return err; - if (time_after(jiffies, data->last_updated + timeout) || - !data->valid) { + err = regmap_read(regmap, AMC6821_REG_PSV_TEMP, &regval); + if (err) + return err; + data->temp1_auto_point_temp[0] = regval; + data->temp2_auto_point_temp[0] = data->temp1_auto_point_temp[0]; - for (i = 0; i < TEMP_IDX_LEN; i++) - data->temp[i] = (int8_t)i2c_smbus_read_byte_data( - client, temp_reg[i]); + err = regmap_read(regmap, AMC6821_REG_LTEMP_FAN_CTRL, &regval); + if (err) + return err; + data->temp1_auto_point_temp[1] = (regval & 0xF8) >> 1; - data->stat1 = i2c_smbus_read_byte_data(client, - AMC6821_REG_STAT1); - data->stat2 = i2c_smbus_read_byte_data(client, - AMC6821_REG_STAT2); + regval &= 0x07; + regval = 0x20 >> regval; + if (regval) + data->temp1_auto_point_temp[2] = + data->temp1_auto_point_temp[1] + + (255 - pwm) / regval; + else + data->temp1_auto_point_temp[2] = 255; - data->pwm1 = i2c_smbus_read_byte_data(client, - AMC6821_REG_DCY); - for (i = 0; i < FAN1_IDX_LEN; i++) { - data->fan[i] = i2c_smbus_read_byte_data( - client, - fan_reg_low[i]); - data->fan[i] += i2c_smbus_read_byte_data( - client, - fan_reg_hi[i]) << 8; - } - data->fan1_pulses = i2c_smbus_read_byte_data(client, - AMC6821_REG_CONF4); - data->fan1_pulses = data->fan1_pulses & AMC6821_CONF4_PSPR ? 4 : 2; + err = regmap_read(regmap, AMC6821_REG_RTEMP_FAN_CTRL, &regval); + if (err) + return err; - data->pwm1_auto_point_pwm[0] = 0; - data->pwm1_auto_point_pwm[2] = 255; - data->pwm1_auto_point_pwm[1] = i2c_smbus_read_byte_data(client, - AMC6821_REG_DCY_LOW_TEMP); + data->temp2_auto_point_temp[1] = (regval & 0xF8) >> 1; + regval &= 0x07; + regval = 0x20 >> regval; - data->temp1_auto_point_temp[0] = - i2c_smbus_read_byte_data(client, - AMC6821_REG_PSV_TEMP); - data->temp2_auto_point_temp[0] = - data->temp1_auto_point_temp[0]; - reg = i2c_smbus_read_byte_data(client, - AMC6821_REG_LTEMP_FAN_CTRL); - data->temp1_auto_point_temp[1] = (reg & 0xF8) >> 1; - reg &= 0x07; - reg = 0x20 >> reg; - if (reg > 0) - data->temp1_auto_point_temp[2] = - data->temp1_auto_point_temp[1] + - (data->pwm1_auto_point_pwm[2] - - data->pwm1_auto_point_pwm[1]) / reg; - else - data->temp1_auto_point_temp[2] = 255; + if (regval) + data->temp2_auto_point_temp[2] = + data->temp2_auto_point_temp[1] + + (255 - pwm) / regval; + else + data->temp2_auto_point_temp[2] = 255; - reg = i2c_smbus_read_byte_data(client, - AMC6821_REG_RTEMP_FAN_CTRL); - data->temp2_auto_point_temp[1] = (reg & 0xF8) >> 1; - reg &= 0x07; - reg = 0x20 >> reg; - if (reg > 0) - data->temp2_auto_point_temp[2] = - data->temp2_auto_point_temp[1] + - (data->pwm1_auto_point_pwm[2] - - data->pwm1_auto_point_pwm[1]) / reg; - else - data->temp2_auto_point_temp[2] = 255; - - reg = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); - reg = (reg >> 5) & 0x3; - switch (reg) { - case 0: /*open loop: software sets pwm1*/ - data->pwm1_auto_channels_temp = 0; - data->pwm1_enable = 1; - break; - case 2: /*closed loop: remote T (temp2)*/ - data->pwm1_auto_channels_temp = 2; - data->pwm1_enable = 2; - break; - case 3: /*closed loop: local and remote T (temp2)*/ - data->pwm1_auto_channels_temp = 3; - data->pwm1_enable = 3; - break; - case 1: /* - * semi-open loop: software sets rpm, chip controls - * pwm1 - */ - data->pwm1_auto_channels_temp = 0; - data->pwm1_enable = 4; - break; - } - - data->last_updated = jiffies; - data->valid = true; - } - mutex_unlock(&data->update_lock); - return data; + return 0; } static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr(devattr)->index; + u32 regval; + int err; - return sprintf(buf, "%d\n", data->temp[ix] * 1000); + err = regmap_read(data->regmap, temp_reg[ix], &regval); + if (err) + return err; + + return sysfs_emit(buf, "%d\n", (int8_t)regval * 1000); } static ssize_t temp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; int ix = to_sensor_dev_attr(attr)->index; long val; + int err; int ret = kstrtol(buf, 10, &val); if (ret) return ret; val = clamp_val(val / 1000, -128, 127); - mutex_lock(&data->update_lock); - data->temp[ix] = val; - if (i2c_smbus_write_byte_data(client, temp_reg[ix], data->temp[ix])) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - } - mutex_unlock(&data->update_lock); + err = regmap_write(data->regmap, temp_reg[ix], val); + if (err) + return err; + return count; } static ssize_t temp_alarm_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr(devattr)->index; - u8 flag; + u32 regval, mask, reg; + int err; switch (ix) { case IDX_TEMP1_MIN: - flag = data->stat1 & AMC6821_STAT1_LTL; + reg = AMC6821_REG_STAT1; + mask = AMC6821_STAT1_LTL; break; case IDX_TEMP1_MAX: - flag = data->stat1 & AMC6821_STAT1_LTH; + reg = AMC6821_REG_STAT1; + mask = AMC6821_STAT1_LTH; break; case IDX_TEMP1_CRIT: - flag = data->stat2 & AMC6821_STAT2_LTC; + reg = AMC6821_REG_STAT2; + mask = AMC6821_STAT2_LTC; break; case IDX_TEMP2_MIN: - flag = data->stat1 & AMC6821_STAT1_RTL; + reg = AMC6821_REG_STAT1; + mask = AMC6821_STAT1_RTL; break; case IDX_TEMP2_MAX: - flag = data->stat1 & AMC6821_STAT1_RTH; + reg = AMC6821_REG_STAT1; + mask = AMC6821_STAT1_RTH; break; case IDX_TEMP2_CRIT: - flag = data->stat2 & AMC6821_STAT2_RTC; + reg = AMC6821_REG_STAT2; + mask = AMC6821_STAT2_RTC; break; default: dev_dbg(dev, "Unknown attr->index (%d).\n", ix); return -EINVAL; } - if (flag) - return sprintf(buf, "1"); - else - return sprintf(buf, "0"); + err = regmap_read(data->regmap, reg, &regval); + if (err) + return err; + return sysfs_emit(buf, "%d\n", !!(regval & mask)); } static ssize_t temp2_fault_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); - if (data->stat1 & AMC6821_STAT1_RTF) - return sprintf(buf, "1"); - else - return sprintf(buf, "0"); + struct amc6821_data *data = dev_get_drvdata(dev); + u32 regval; + int err; + + err = regmap_read(data->regmap, AMC6821_REG_STAT1, &regval); + if (err) + return err; + + return sysfs_emit(buf, "%d\n", !!(regval & AMC6821_STAT1_RTF)); } static ssize_t pwm1_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1); + struct amc6821_data *data = dev_get_drvdata(dev); + u32 regval; + int err; + + err = regmap_read(data->regmap, AMC6821_REG_DCY, &regval); + if (err) + return err; + + return sysfs_emit(buf, "%d\n", regval); } static ssize_t pwm1_store(struct device *dev, @@ -355,7 +299,6 @@ static ssize_t pwm1_store(struct device *dev, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; long val; int ret = kstrtol(buf, 10, &val); if (ret) @@ -364,18 +307,38 @@ static ssize_t pwm1_store(struct device *dev, if (val < 0 || val > 255) return -EINVAL; - mutex_lock(&data->update_lock); - data->pwm1 = val; - i2c_smbus_write_byte_data(client, AMC6821_REG_DCY, data->pwm1); - mutex_unlock(&data->update_lock); + ret = regmap_write(data->regmap, AMC6821_REG_DCY, val); + if (ret) + return ret; + return count; } static ssize_t pwm1_enable_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_enable); + struct amc6821_data *data = dev_get_drvdata(dev); + int err; + u32 val; + + err = regmap_read(data->regmap, AMC6821_REG_CONF1, &val); + if (err) + return err; + switch (val & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) { + case 0: + val = 1; /* manual */ + break; + case AMC6821_CONF1_FDRC0: + val = 4; /* target rpm (fan1_target) controlled */ + break; + case AMC6821_CONF1_FDRC1: + val = 2; /* remote temp controlled */ + break; + default: + val = 3; /* max(local, remote) temp controlled */ + break; + } + return sysfs_emit(buf, "%d\n", val); } static ssize_t pwm1_enable_store(struct device *dev, @@ -383,49 +346,37 @@ static ssize_t pwm1_enable_store(struct device *dev, const char *buf, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; long val; - int config = kstrtol(buf, 10, &val); - if (config) - return config; + u32 mask; + int err; - mutex_lock(&data->update_lock); - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - count = config; - goto unlock; - } + err = kstrtol(buf, 10, &val); + if (err) + return err; switch (val) { case 1: - config &= ~AMC6821_CONF1_FDRC0; - config &= ~AMC6821_CONF1_FDRC1; + mask = 0; break; case 2: - config &= ~AMC6821_CONF1_FDRC0; - config |= AMC6821_CONF1_FDRC1; + mask = AMC6821_CONF1_FDRC1; break; case 3: - config |= AMC6821_CONF1_FDRC0; - config |= AMC6821_CONF1_FDRC1; + mask = AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1; break; case 4: - config |= AMC6821_CONF1_FDRC0; - config &= ~AMC6821_CONF1_FDRC1; + mask = AMC6821_CONF1_FDRC0; break; default: - count = -EINVAL; - goto unlock; + return -EINVAL; } - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF1, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - count = -EIO; - } -unlock: - mutex_unlock(&data->update_lock); + + err = regmap_update_bits(data->regmap, AMC6821_REG_CONF1, + AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1, + mask); + if (err < 0) + return err; + return count; } @@ -433,8 +384,27 @@ static ssize_t pwm1_auto_channels_temp_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_auto_channels_temp); + struct amc6821_data *data = dev_get_drvdata(dev); + u32 val; + int err; + + err = regmap_read(data->regmap, AMC6821_REG_CONF1, &val); + if (err) + return err; + switch (val & (AMC6821_CONF1_FDRC0 | AMC6821_CONF1_FDRC1)) { + case 0: + case AMC6821_CONF1_FDRC0: + val = 0; /* manual or target rpm controlled */ + break; + case AMC6821_CONF1_FDRC1: + val = 2; /* remote temp controlled */ + break; + default: + val = 3; /* max(local, remote) temp controlled */ + break; + } + + return sprintf(buf, "%d\n", val); } static ssize_t temp_auto_point_temp_show(struct device *dev, @@ -443,7 +413,8 @@ static ssize_t temp_auto_point_temp_show(struct device *dev, { int ix = to_sensor_dev_attr_2(devattr)->index; int nr = to_sensor_dev_attr_2(devattr)->nr; - struct amc6821_data *data = amc6821_update_device(dev); + struct amc6821_data *data = dev_get_drvdata(dev); + switch (nr) { case 1: return sprintf(buf, "%d\n", @@ -461,44 +432,59 @@ static ssize_t pwm1_auto_point_pwm_show(struct device *dev, struct device_attribute *devattr, char *buf) { + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr(devattr)->index; - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_auto_point_pwm[ix]); + u32 val; + int err; + + switch (ix) { + case 0: + val = 0; + break; + case 1: + err = regmap_read(data->regmap, AMC6821_REG_DCY_LOW_TEMP, &val); + if (err) + return err; + break; + default: + val = 255; + break; + } + return sysfs_emit(buf, "%d\n", val); } -static inline ssize_t set_slope_register(struct i2c_client *client, - u8 reg, - u8 dpwm, - u8 *ptemp) +static inline int set_slope_register(struct regmap *regmap, + u8 reg, u8 *ptemp) { - int dt; - u8 tmp; + u8 tmp, dpwm; + int err, dt; + u32 pwm; - dt = ptemp[2]-ptemp[1]; + err = regmap_read(regmap, AMC6821_REG_DCY_LOW_TEMP, &pwm); + if (err) + return err; + + dpwm = 255 - pwm; + + dt = ptemp[2] - ptemp[1]; for (tmp = 4; tmp > 0; tmp--) { if (dt * (0x20 >> tmp) >= dpwm) break; } tmp |= (ptemp[1] & 0x7C) << 1; - if (i2c_smbus_write_byte_data(client, - reg, tmp)) { - dev_err(&client->dev, "Register write error, aborting.\n"); - return -EIO; - } - return 0; + return regmap_write(regmap, reg, tmp); } static ssize_t temp_auto_point_temp_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct amc6821_data *data = amc6821_update_device(dev); - struct i2c_client *client = data->client; + struct amc6821_data *data = dev_get_drvdata(dev); + struct regmap *regmap = data->regmap; int ix = to_sensor_dev_attr_2(attr)->index; int nr = to_sensor_dev_attr_2(attr)->nr; u8 *ptemp; u8 reg; - int dpwm; long val; int ret = kstrtol(buf, 10, &val); if (ret) @@ -519,7 +505,6 @@ static ssize_t temp_auto_point_temp_store(struct device *dev, } mutex_lock(&data->update_lock); - data->valid = false; switch (ix) { case 0: @@ -528,13 +513,9 @@ static ssize_t temp_auto_point_temp_store(struct device *dev, ptemp[0] = clamp_val(ptemp[0], 0, data->temp2_auto_point_temp[1]); ptemp[0] = clamp_val(ptemp[0], 0, 63); - if (i2c_smbus_write_byte_data( - client, - AMC6821_REG_PSV_TEMP, - ptemp[0])) { - dev_err(&client->dev, - "Register write error, aborting.\n"); - count = -EIO; + if (regmap_write(regmap, AMC6821_REG_PSV_TEMP, ptemp[0])) { + dev_err(dev, "Register write error, aborting.\n"); + count = -EIO; } goto EXIT; case 1: @@ -550,8 +531,7 @@ static ssize_t temp_auto_point_temp_store(struct device *dev, count = -EINVAL; goto EXIT; } - dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; - if (set_slope_register(client, reg, dpwm, ptemp)) + if (set_slope_register(regmap, reg, ptemp)) count = -EIO; EXIT: @@ -564,38 +544,37 @@ static ssize_t pwm1_auto_point_pwm_store(struct device *dev, const char *buf, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int dpwm; - unsigned long val; - int ret = kstrtoul(buf, 10, &val); + struct regmap *regmap = data->regmap; + long val; + int ret; + + ret = kstrtoul(buf, 10, &val); if (ret) return ret; - if (val > 255) + if (val > 254) return -EINVAL; mutex_lock(&data->update_lock); - data->pwm1_auto_point_pwm[1] = val; - if (i2c_smbus_write_byte_data(client, AMC6821_REG_DCY_LOW_TEMP, - data->pwm1_auto_point_pwm[1])) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - goto EXIT; + + ret = regmap_write(regmap, AMC6821_REG_DCY_LOW_TEMP, val); + if (ret) + goto unlock; + + ret = set_slope_register(regmap, AMC6821_REG_LTEMP_FAN_CTRL, + data->temp1_auto_point_temp); + if (ret) { + count = ret; + goto unlock; } - dpwm = data->pwm1_auto_point_pwm[2] - data->pwm1_auto_point_pwm[1]; - if (set_slope_register(client, AMC6821_REG_LTEMP_FAN_CTRL, dpwm, - data->temp1_auto_point_temp)) { - count = -EIO; - goto EXIT; - } - if (set_slope_register(client, AMC6821_REG_RTEMP_FAN_CTRL, dpwm, - data->temp2_auto_point_temp)) { - count = -EIO; - goto EXIT; + ret = set_slope_register(regmap, AMC6821_REG_RTEMP_FAN_CTRL, + data->temp2_auto_point_temp); + if (ret) { + count = ret; + goto unlock; } -EXIT: - data->valid = false; +unlock: mutex_unlock(&data->update_lock); return count; } @@ -603,58 +582,72 @@ static ssize_t pwm1_auto_point_pwm_store(struct device *dev, static ssize_t fan_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); + struct amc6821_data *data = dev_get_drvdata(dev); int ix = to_sensor_dev_attr(devattr)->index; - if (0 == data->fan[ix]) - return sprintf(buf, "6000000"); - return sprintf(buf, "%d\n", (int)(6000000 / data->fan[ix])); + u32 regval; + u8 regs[2]; + int err; + + err = regmap_bulk_read(data->regmap, fan_reg_low[ix], regs, 2); + if (err) + return err; + regval = (regs[1] << 8) | regs[0]; + + return sysfs_emit(buf, "%d\n", 6000000 / (regval ? : 1)); } static ssize_t fan1_fault_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); - if (data->stat1 & AMC6821_STAT1_FANS) - return sprintf(buf, "1"); - else - return sprintf(buf, "0"); + struct amc6821_data *data = dev_get_drvdata(dev); + u32 regval; + int err; + + err = regmap_read(data->regmap, AMC6821_REG_STAT1, &regval); + if (err) + return err; + + return sysfs_emit(buf, "%d\n", !!(regval & AMC6821_STAT1_FANS)); } static ssize_t fan_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - long val; int ix = to_sensor_dev_attr(attr)->index; - int ret = kstrtol(buf, 10, &val); - if (ret) - return ret; - val = val < 1 ? 0xFFFF : 6000000 / val; + u8 regs[2]; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + val = val < 1 ? 0xFFFF : 6000000 / val; + val = clamp_val(val, 0, 0xFFFF); + + regs[0] = val & 0xff; + regs[1] = val >> 8; + + err = regmap_bulk_write(data->regmap, fan_reg_low[ix], regs, 2); + if (err) + return err; - mutex_lock(&data->update_lock); - data->fan[ix] = (u16)clamp_val(val, 0, 0xFFFF); - if (i2c_smbus_write_byte_data(client, fan_reg_low[ix], - data->fan[ix] & 0xFF)) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - goto EXIT; - } - if (i2c_smbus_write_byte_data(client, - fan_reg_hi[ix], data->fan[ix] >> 8)) { - dev_err(&client->dev, "Register write error, aborting.\n"); - count = -EIO; - } -EXIT: - mutex_unlock(&data->update_lock); return count; } static ssize_t fan1_pulses_show(struct device *dev, struct device_attribute *devattr, char *buf) { - struct amc6821_data *data = amc6821_update_device(dev); - return sprintf(buf, "%d\n", data->fan1_pulses); + struct amc6821_data *data = dev_get_drvdata(dev); + u32 regval; + int err; + + err = regmap_read(data->regmap, AMC6821_REG_CONF4, &regval); + if (err) + return err; + + return sysfs_emit(buf, "%d\n", (regval & AMC6821_CONF4_PSPR) ? 4 : 2); } static ssize_t fan1_pulses_store(struct device *dev, @@ -662,40 +655,22 @@ static ssize_t fan1_pulses_store(struct device *dev, size_t count) { struct amc6821_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; long val; - int config = kstrtol(buf, 10, &val); - if (config) - return config; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + + if (val != 2 && val != 4) + return -EINVAL; + + err = regmap_update_bits(data->regmap, AMC6821_REG_CONF4, + AMC6821_CONF4_PSPR, + val == 4 ? AMC6821_CONF4_PSPR : 0); + if (err) + return err; - mutex_lock(&data->update_lock); - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - count = config; - goto EXIT; - } - switch (val) { - case 2: - config &= ~AMC6821_CONF4_PSPR; - data->fan1_pulses = 2; - break; - case 4: - config |= AMC6821_CONF4_PSPR; - data->fan1_pulses = 4; - break; - default: - count = -EINVAL; - goto EXIT; - } - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - count = -EIO; - } -EXIT: - mutex_unlock(&data->update_lock); return count; } @@ -827,110 +802,84 @@ static int amc6821_detect( return 0; } -static int amc6821_init_client(struct i2c_client *client) +static int amc6821_init_client(struct amc6821_data *data) { - int config; - int err = -EIO; + struct regmap *regmap = data->regmap; + int err; + + err = amc6821_init_auto_point_data(data); + if (err) + return err; if (init) { - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF4); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - return err; - } - - config |= AMC6821_CONF4_MODE; - - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF4, - config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); + err = regmap_set_bits(regmap, AMC6821_REG_CONF4, AMC6821_CONF4_MODE); + if (err) return err; - } - - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF3); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); + err = regmap_clear_bits(regmap, AMC6821_REG_CONF3, AMC6821_CONF3_THERM_FAN_EN); + if (err) return err; - } - - dev_info(&client->dev, "Revision %d\n", config & 0x0f); - - config &= ~AMC6821_CONF3_THERM_FAN_EN; - - if (i2c_smbus_write_byte_data(client, AMC6821_REG_CONF3, - config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); + err = regmap_clear_bits(regmap, AMC6821_REG_CONF2, + AMC6821_CONF2_RTFIE | + AMC6821_CONF2_LTOIE | + AMC6821_CONF2_RTOIE); + if (err) return err; - } - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF2); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); + err = regmap_update_bits(regmap, AMC6821_REG_CONF1, + AMC6821_CONF1_THERMOVIE | AMC6821_CONF1_FANIE | + AMC6821_CONF1_START | AMC6821_CONF1_PWMINV, + AMC6821_CONF1_START | + (pwminv ? AMC6821_CONF1_PWMINV : 0)); + if (err) return err; - } - - config &= ~AMC6821_CONF2_RTFIE; - config &= ~AMC6821_CONF2_LTOIE; - config &= ~AMC6821_CONF2_RTOIE; - if (i2c_smbus_write_byte_data(client, - AMC6821_REG_CONF2, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - return err; - } - - config = i2c_smbus_read_byte_data(client, AMC6821_REG_CONF1); - - if (config < 0) { - dev_err(&client->dev, - "Error reading configuration register, aborting.\n"); - return err; - } - - config &= ~AMC6821_CONF1_THERMOVIE; - config &= ~AMC6821_CONF1_FANIE; - config |= AMC6821_CONF1_START; - if (pwminv) - config |= AMC6821_CONF1_PWMINV; - else - config &= ~AMC6821_CONF1_PWMINV; - - if (i2c_smbus_write_byte_data( - client, AMC6821_REG_CONF1, config)) { - dev_err(&client->dev, - "Configuration register write error, aborting.\n"); - return err; - } } return 0; } +static bool amc6821_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case AMC6821_REG_STAT1: + case AMC6821_REG_STAT2: + case AMC6821_REG_TEMP_LO: + case AMC6821_REG_TDATA_LOW: + case AMC6821_REG_LTEMP_HI: + case AMC6821_REG_RTEMP_HI: + case AMC6821_REG_TDATA_HI: + return true; + default: + return false; + } +} + +static const struct regmap_config amc6821_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = AMC6821_REG_CONF3, + .volatile_reg = amc6821_volatile_reg, + .cache_type = REGCACHE_MAPLE, +}; + static int amc6821_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct amc6821_data *data; struct device *hwmon_dev; + struct regmap *regmap; int err; data = devm_kzalloc(dev, sizeof(struct amc6821_data), GFP_KERNEL); if (!data) return -ENOMEM; - data->client = client; - mutex_init(&data->update_lock); - /* - * Initialize the amc6821 chip - */ - err = amc6821_init_client(client); + regmap = devm_regmap_init_i2c(client, &amc6821_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize regmap\n"); + data->regmap = regmap; + + err = amc6821_init_client(data); if (err) return err;

[09/10] hwmon: (amc6821) Convert to use regmap

Commit Message

Patch