diff mbox series

[v7,2/3] dt-bindings: hwmon: adt7475: Deprecate adi,pwm-active-state

Message ID 20240722221737.3407958-3-chris.packham@alliedtelesis.co.nz (mailing list archive)
State Accepted
Headers show
Series hwmon: (adt7475) duty cycle configuration | expand

Commit Message

Chris Packham July 22, 2024, 10:17 p.m. UTC
Now that we have fan child nodes that can specify flags for the PWM
outputs we no longer need the adi,pwm-active-state property.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---

Notes:
    Changes in v6 & v7:
    - None
    Changes in v5:
    - Add ack from Rob
    Changes in v4:
    - None
    Changes in v3:
    - New

 Documentation/devicetree/bindings/hwmon/adt7475.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Guenter Roeck July 25, 2024, 2:06 p.m. UTC | #1
On Tue, Jul 23, 2024 at 10:17:36AM +1200, Chris Packham wrote:
> Now that we have fan child nodes that can specify flags for the PWM
> outputs we no longer need the adi,pwm-active-state property.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Acked-by: Rob Herring (Arm) <robh@kernel.org>

Applied.

Thanks,
Guenter
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index df2b5b889e4d..79e8d62fa3b3 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -45,6 +45,7 @@  properties:
       the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
       uses a logic high output for 100% duty cycle.
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
     minItems: 3
     maxItems: 3
     items:
@@ -121,7 +122,6 @@  examples:
         reg = <0x2e>;
         adi,bypass-attenuator-in0 = <1>;
         adi,bypass-attenuator-in1 = <0>;
-        adi,pwm-active-state = <1 0 1>;
         adi,pin10-function = "smbalert#";
         adi,pin14-function = "tach4";
         #pwm-cells = <4>;