From patchwork Mon Sep 9 15:39:05 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jerome Brunet X-Patchwork-Id: 13797250 Received: from mail-wr1-f47.google.com (mail-wr1-f47.google.com [209.85.221.47]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 039A05588B for ; Mon, 9 Sep 2024 15:39:21 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.47 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725896364; cv=none; b=eTaaKxCophgPXpQ1L01lH2v60gVLbarQiRJaKbg/97YhUQ2aXr2Hw1Hz/F/J2/s06uGQ3vlL3286iZEKYWaI7Oz7RCzvGUFdckQAKnBuBvzzMbtJIT76sSdIwyGg4cEueCwX/r9dHb3adE8vy6Y//ZaDzUrQ3rTGkKTIg4Xp5zY= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725896364; c=relaxed/simple; bh=3cxZUkMWB3bWChq69hrIXMPl+uSIw7UJ+pAYSdFQZ4I=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=UPTLYhteCIQYeYknwWvtnD/ySccjLMQx9zAGXWcxm5PXQbTYnqMy7FBzsfhtNwwjKtcX6vfKuHxmMu3HMLuLK313oXjw40T7zUixBpmQT2x2LPWbefudo45Fcp0zvelLI+8AbgqDf3ljVhYODfcMwwlwH00z8QrzltedEVQBVFs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=uEq1gNe3; arc=none smtp.client-ip=209.85.221.47 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="uEq1gNe3" Received: by mail-wr1-f47.google.com with SMTP id ffacd0b85a97d-374cacf18b1so2633313f8f.2 for ; Mon, 09 Sep 2024 08:39:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1725896360; x=1726501160; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=VkiOCELnHFizmB6BxFn0pXWtV/LlXwXBPgn4A4PXdjU=; b=uEq1gNe3kSbm7U/rQwZuqzh+gU5jXLMxFEFTpQKi2hShVh8AIL2pOlXwvKSFp7HWew MyJ/YXRZXHtw1oPoU7GYNZG0jGYBf7ugcV1ed4xE7Gp18KjaV6rSo5zigNAxLYMl+T1O txJDDypEF2LXxyqJtZwx7AqNLD09OduUiu5MAlsBUr7IGPG//eaD9flFUUGQqQnqBe1o OhRag+5PJcNmo0qFDDs09hI89op+PvQUMt+CEctmHlAagAELR8vFAaob+MrmJO4e0PLv PzC4huz8Ko0nwaIpY38D4GWbB6CQNbttrBvMUEptjuZYA7HRM6FM+dgPPXsxK2WzEMme lskA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1725896360; x=1726501160; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VkiOCELnHFizmB6BxFn0pXWtV/LlXwXBPgn4A4PXdjU=; b=cEBgsqdqM8lMvNM2zjofsDAwJHy2TmIcNOFdDBR8c0rRypZ+jM3EMcSuuemwpwwzEU t/8fcLK547vUqNtpTpOMI50J4gOUqtTwoU5f+NfF79NvQqqTzNg4KQM4RQTSCvCAahYM kpLys6GyFE8cmO/WEXXac3VStMTWohwbccARanWVFCH/2bwVMApb35eMJz7DrkFEJeIi kEb0JkjC5yzc+vW87R0gwb9zNs8NsSEQyAaiRGBw0PGmBHdpcBBpHjPo5nw56q+BBv/N +0PG4k2knvSOASNMaEXfWPIWQbP8HHGl0+aStCD0fiIhgTeTYPWwIN9dIw7N526uDDwk xEQQ== X-Gm-Message-State: AOJu0Yy5vOtVVecjf+64qY2DEV27kYSq1esdlBoVnHm5ODFsOBErjMxW SRqnjtNLOAMBChumxSuK7SG+KgphNAT/twDet4wmqBbEbnefDvLVJtrmv0ysCc8= X-Google-Smtp-Source: AGHT+IFVbo8ijk5oT9KYsYnpWCU4bxAYBABqwUuRrMkySBYEGnpvzzRCmHlnNm1qY9hSLsU2quh1yw== X-Received: by 2002:a5d:4145:0:b0:376:27b7:da81 with SMTP id ffacd0b85a97d-3789268f0b1mr4879745f8f.22.1725896360103; Mon, 09 Sep 2024 08:39:20 -0700 (PDT) Received: from toaster.baylibre.com ([2a01:e0a:3c5:5fb1:788a:4542:ae86:67f4]) by smtp.googlemail.com with ESMTPSA id ffacd0b85a97d-3789564af1asm6305145f8f.18.2024.09.09.08.39.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 09 Sep 2024 08:39:19 -0700 (PDT) From: Jerome Brunet Date: Mon, 09 Sep 2024 17:39:05 +0200 Subject: [PATCH 3/3] hwmon: (pmbus/tps25990): add initial support Precedence: bulk X-Mailing-List: linux-hwmon@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240909-tps25990-v1-3-39b37e43e795@baylibre.com> References: <20240909-tps25990-v1-0-39b37e43e795@baylibre.com> In-Reply-To: <20240909-tps25990-v1-0-39b37e43e795@baylibre.com> To: Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jerome Brunet , Jonathan Corbet , Delphine CC Chiu Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=openpgp-sha256; l=18094; i=jbrunet@baylibre.com; h=from:subject:message-id; bh=3cxZUkMWB3bWChq69hrIXMPl+uSIw7UJ+pAYSdFQZ4I=; b=owEBbQKS/ZANAwAKAeb8Dxw38tqFAcsmYgBm3xajcVfsdJeOvsgNEqArovAPg4f8v/N/6AKWW BS8VGfc8yWJAjMEAAEKAB0WIQT04VmuGPP1bV8btxvm/A8cN/LahQUCZt8WowAKCRDm/A8cN/La hdijD/4paWJye299vD6SIKS0R8Dj39eW9h1CeQZPmV2NOWzKCVTjOaGZ672pAxinyXMwdY4Rday dMcsrqjrjYxXH46vB18tZkDyRJiR5saR3xs+CRfxg818ReedyoXaMJD4hLDl7uyiU4AABSrATKj +4hUX9Q4hgAyhLLZZA6mqYXrulox/shamITjF8fPqSgtG/R0NjQmtQVsjDx1kDKql5K/lnhkAfm Z1HmmJrXMOlJri0/6cU2i3afpHnylbom+7Sj8mUw6k10mOS4qz+sNFy/LOreFloja5eyYsTgdbg 5oOjA2a4HfyY9zHSu5r0YlnQf+jISNXjIWIhkNASPNjc18ile0u+IOmwQGRySaUF9CLqVgnjogz mOUMb++/n/CNRHou2DyOiP6ajZnWmFHnU6Oqt587AxdZiquqpa6PcEXWWXMl+KVcKqjT2vEB9UZ s0JNzGNIVk/gyvlx10qgSVWS54OcqjjvCXqnO+GyRYL2JOQxUeeywxKp9ffcweJUM/XIapqCjNy lPbOdCiDtsVzIyFmdgEmvBTFFLiPV4SrpAlM9x0G1IENhgOEVwbdKYMo5G5kiXHUwUu/TX3pt/R 9feCEVnxgkqaMphODgau1qTBdpc153G2rVqSnDPZfVw2JcT6JbIlWvvgGPAO/ufTmHc/Bb1qb3q 91ZP8xDu1Koh+Gg== X-Developer-Key: i=jbrunet@baylibre.com; a=openpgp; fpr=F29F26CF27BAE1A9719AE6BDC3C92AAF3E60AED9 Add initial support for the Texas Instruments TPS25990 eFuse. This adds the basic PMBUS telemetry support for the device. Signed-off-by: Jerome Brunet --- Documentation/hwmon/tps25990.rst | 141 ++++++++++++ drivers/hwmon/pmbus/Kconfig | 17 ++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/tps25990.c | 474 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 633 insertions(+) diff --git a/Documentation/hwmon/tps25990.rst b/Documentation/hwmon/tps25990.rst new file mode 100644 index 000000000000..7b3ef724008a --- /dev/null +++ b/Documentation/hwmon/tps25990.rst @@ -0,0 +1,141 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver tps25990 +====================== + +Supported chips: + + * TI TPS25990 + + Prefix: 'tps25990' + + * Datasheet + + Publicly available at Texas Instruments website: https://www.ti.com/lit/gpn/tps25990 + +Author: + + Jerome Brunet + +Description +----------- + +This driver implements support for TI TPS25990 eFuse. +This is an integrated, high-current circuit protection and power +management device with PMBUS interface + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct format for reading input voltages, +output voltage, input current, input power and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input current: + +**curr1_average** + +**curr1_crit** + +**curr1_crit_alarm** + +**curr1_highest** + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for main input voltage: + +**in1_average** + +**in1_crit** + +**in1_crit_alarm** + +**in1_highest** + +**in1_input** + +**in1_label** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_lowest** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for auxiliary input voltage: + +**in2_input** + +**in2_label** + +The driver provides the following attributes for output voltage: + +**in3_average** + +**in3_good_off** + +**in3_input** + +**in3_label** + +**in3_lowest** + +**in3_min** + +**in3_min_alarm** + +The driver provides the following attributes for input power: + +**power1_alarm** + +**power1_average** + +**power1_input** + +**power1_input_highest** + +**power1_label** + +**power1_max** + +The driver provides the following attributes for temperature: + +**temp1_average** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_highest** + +**temp1_input** + +**temp1_max** + +**temp1_max_alarm** + +The driver provides the following attributes for history: + +**samples** + +**average_history_reset** + +**highest_history_reset** + +**lowest_history_reset** diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index a4f02cad92fd..3559864e232d 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -510,6 +510,23 @@ config SENSORS_TDA38640_REGULATOR If you say yes here you get regulator support for Infineon TDA38640 as regulator. +config SENSORS_TPS25990 + tristate "TI TPS25990" + help + If you say yes here you get hardware monitoring support for TI + TPS25990. + + This driver can also be built as a module. If so, the module will + be called tps25990. + +config SENSORS_TPS25990_REGULATOR + bool "Regulator support for TPS25990 and compatibles" + depends on SENSORS_TPS25990 && REGULATOR + default SENSORS_TPS2599 + help + If you say yes here you get regulator support for Texas Instruments + TPS25990. + config SENSORS_TPS40422 tristate "TI TPS40422" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index d00bcc758b97..3d3183f8d2a7 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o obj-$(CONFIG_SENSORS_TDA38640) += tda38640.o +obj-$(CONFIG_SENSORS_TPS25990) += tps25990.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o obj-$(CONFIG_SENSORS_TPS546D24) += tps546d24.o diff --git a/drivers/hwmon/pmbus/tps25990.c b/drivers/hwmon/pmbus/tps25990.c new file mode 100644 index 000000000000..14290c4c71dd --- /dev/null +++ b/drivers/hwmon/pmbus/tps25990.c @@ -0,0 +1,474 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2024 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include +#include +#include + +#include "pmbus.h" + +#define TPS25990_READ_VAUX 0xd0 +#define TPS25990_READ_VIN_MIN 0xd1 +#define TPS25990_READ_VIN_PEAK 0xd2 +#define TPS25990_READ_IIN_PEAK 0xd4 +#define TPS25990_READ_PIN_PEAK 0xd5 +#define TPS25990_READ_TEMP_AVG 0xd6 +#define TPS25990_READ_TEMP_PEAK 0xd7 +#define TPS25990_READ_VOUT_MIN 0xda +#define TPS25990_READ_VIN_AVG 0xdc +#define TPS25990_READ_VOUT_AVG 0xdd +#define TPS25990_READ_IIN_AVG 0xde +#define TPS25990_READ_PIN_AVG 0xdf +#define TPS25990_VIREF 0xe0 +#define TPS25990_PK_MIN_AVG 0xea +#define PK_MIN_AVG_RST_PEAK BIT(7) +#define PK_MIN_AVG_RST_AVG BIT(6) +#define PK_MIN_AVG_RST_MIN BIT(5) +#define PK_MIN_AVG_AVG_CNT GENMASK(2, 0) +#define TPS25990_MFR_WRITE_PROTECT 0xf8 +#define TPS25990_UNLOCKED BIT(7) + +#define TPS25990_8B_SHIFT 2 +#define TPS25990_VIN_OVF_NUM 525100 +#define TPS25990_VIN_OVF_DIV 10163 +#define TPS25990_VIN_OVF_OFF 155 +#define TPS25990_IIN_OCF_NUM 953800 +#define TPS25990_IIN_OCF_DIV 129278 +#define TPS25990_IIN_OCF_OFF 157 + +#define TPS25990_DEFAULT_RIMON 910000 + +static int tps25990_mfr_write_protect(struct i2c_client *client, bool protect) +{ + return pmbus_write_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT, + protect ? 0x0 : 0xa2); +} + +static int tps25990_mfr_write_protect_active(struct i2c_client *client) +{ + int ret = pmbus_read_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT); + + if (ret < 0) + return ret; + + return !(ret & TPS25990_UNLOCKED); +} + +#if IS_ENABLED(CONFIG_DEBUG_FS) +static int tps25990_write_protect_get(void *data, u64 *val) +{ + struct i2c_client *client = data; + + return tps25990_mfr_write_protect_active(client); +} + +static int tps25990_write_protect_set(void *data, u64 val) +{ + struct i2c_client *client = data; + + if (val > 1) + return -EINVAL; + + return tps25990_mfr_write_protect(client, val); +} + +DEFINE_DEBUGFS_ATTRIBUTE(tps25990_write_protect_fops, + tps25990_write_protect_get, + tps25990_write_protect_set, + "%llu\n"); + +static int tps25990_init_debugfs(struct i2c_client *client) +{ + struct dentry *dir; + + dir = pmbus_get_debugfs_dir(client); + if (!dir) + return -ENOENT; + + debugfs_create_file("write_protect", 0644, dir, + client, &tps25990_write_protect_fops); + + return 0; +} + +#else +static inline int tps25990_init_debugfs(struct i2c_client *client) +{ + return 0; +} +#endif + +/* + * TPS25990 has history reset based on MIN/AVG/PEAK instead of per sensor type + * Emulate the behaviour a pmbus limit_attr would have for consistency + * - Read: Do nothing and emit 0 + * - Write: Check the input is a number and reset + */ +static ssize_t tps25990_history_reset_show(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + return sysfs_emit(buf, "0\n"); +} + +static ssize_t tps25990_history_reset_store(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev->parent); + s64 val; + int ret; + + if (kstrtos64(buf, 10, &val) < 0) + return -EINVAL; + + ret = pmbus_update_byte_data(client, 0, TPS25990_PK_MIN_AVG, + BIT(attr->index), BIT(attr->index)); + if (ret < 0) + return ret; + + return count; +} + +static SENSOR_DEVICE_ATTR_RW(highest_history_reset, tps25990_history_reset, 7); +static SENSOR_DEVICE_ATTR_RW(average_history_reset, tps25990_history_reset, 6); +static SENSOR_DEVICE_ATTR_RW(lowest_history_reset, tps25990_history_reset, 5); + +static struct attribute *tps25990_attrs[] = { + &sensor_dev_attr_highest_history_reset.dev_attr.attr, + &sensor_dev_attr_average_history_reset.dev_attr.attr, + &sensor_dev_attr_lowest_history_reset.dev_attr.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(tps25990); + +static int tps25990_get_addr(int reg) +{ + switch (reg) { + case PMBUS_SMBALERT_MASK: + /* + * Note: PMBUS_SMBALERT_MASK is not implemented on this chip + * Writing to this address raises CML errors. + * Instead it provides ALERT_MASK which allows to set the mask + * for each of the status registers, but not the specific bits + * in them. + * The default setup assert SMBA# if any bit is set in any of the + * status registers the chip has. This is as close as we can get + * to what pmbus_irq_setup() would set, sooo ... do nothing. + */ + return -ENXIO; + case PMBUS_IIN_OC_FAULT_LIMIT: + /* + * VIREF directly sets the over-current limit at which the eFuse + * will turn the FET off and trigger a fault. Expose it through + * this generic property instead of a manufacturer specific one. + */ + return TPS25990_VIREF; + case PMBUS_VIRT_READ_VIN_MAX: + return TPS25990_READ_VIN_PEAK; + case PMBUS_VIRT_READ_VIN_MIN: + return TPS25990_READ_VIN_MIN; + case PMBUS_VIRT_READ_VIN_AVG: + return TPS25990_READ_VIN_AVG; + case PMBUS_VIRT_READ_VOUT_MIN: + return TPS25990_READ_VOUT_MIN; + case PMBUS_VIRT_READ_VOUT_AVG: + return TPS25990_READ_VOUT_AVG; + case PMBUS_VIRT_READ_IIN_AVG: + return TPS25990_READ_IIN_AVG; + case PMBUS_VIRT_READ_IIN_MAX: + return TPS25990_READ_IIN_PEAK; + case PMBUS_VIRT_READ_TEMP_AVG: + return TPS25990_READ_TEMP_AVG; + case PMBUS_VIRT_READ_TEMP_MAX: + return TPS25990_READ_TEMP_PEAK; + case PMBUS_VIRT_READ_PIN_AVG: + return TPS25990_READ_PIN_AVG; + case PMBUS_VIRT_READ_PIN_MAX: + return TPS25990_READ_PIN_PEAK; + case PMBUS_VIRT_READ_VMON: + return TPS25990_READ_VAUX; + case PMBUS_VIRT_SAMPLES: + return TPS25990_PK_MIN_AVG; + } + + /* Let the register check do its job */ + if (reg < PMBUS_VIRT_BASE) + return reg; + + return -ENXIO; +} + +/* + * Some registers use a different scale than the one registered with + * pmbus_driver_info. An extra conversion step is necessary to adapt + * the register value to the conversion on the sensor type + */ +static int tps25990_read_adapt_value(int reg, int val) +{ + switch (reg) { + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_OT_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + case PMBUS_POWER_GOOD_OFF: + /* + * These registers provide an 8 bits value instead of a + * 10bits one. Just shifting twice the register value is + * enough to make the sensor type conversion work, even + * if the datasheet provides different m, b and R for + * those. + */ + val <<= TPS25990_8B_SHIFT; + break; + + case PMBUS_VIN_OV_FAULT_LIMIT: + val = DIV_ROUND_CLOSEST(val * TPS25990_VIN_OVF_NUM, TPS25990_VIN_OVF_DIV); + val += TPS25990_VIN_OVF_OFF; + break; + + case PMBUS_IIN_OC_FAULT_LIMIT: + val = DIV_ROUND_CLOSEST(val * TPS25990_IIN_OCF_NUM, TPS25990_IIN_OCF_DIV); + val += TPS25990_IIN_OCF_OFF; + break; + + case PMBUS_VIRT_SAMPLES: + val = 1 << val; + break; + } + + return val; +} + +static int tps25990_read_word(struct i2c_client *client, + int page, int phase, int reg) +{ + int ret, addr; + + addr = tps25990_get_addr(reg); + if (addr < 0) + return addr; + + switch (reg) { + case PMBUS_VIRT_SAMPLES: + ret = pmbus_read_byte_data(client, page, addr); + ret = FIELD_GET(PK_MIN_AVG_AVG_CNT, ret); + break; + + case PMBUS_IIN_OC_FAULT_LIMIT: + ret = pmbus_read_byte_data(client, page, addr); + break; + + default: + ret = pmbus_read_word_data(client, page, -1, addr); + break; + } + + if (ret >= 0) + ret = tps25990_read_adapt_value(reg, ret); + + return ret; +} + +static int tps25990_write_adapt_value(int reg, int val) +{ + switch (reg) { + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_OT_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + case PMBUS_POWER_GOOD_OFF: + val >>= TPS25990_8B_SHIFT; + val = clamp(val, 0, 0xff); + break; + + case PMBUS_VIN_OV_FAULT_LIMIT: + val -= TPS25990_VIN_OVF_OFF; + val = DIV_ROUND_CLOSEST(val * TPS25990_VIN_OVF_DIV, TPS25990_VIN_OVF_NUM); + val = clamp_val(val, 0, 0xf); + break; + + case PMBUS_IIN_OC_FAULT_LIMIT: + val -= TPS25990_IIN_OCF_OFF; + val = DIV_ROUND_CLOSEST(val * TPS25990_IIN_OCF_DIV, TPS25990_IIN_OCF_NUM); + val = clamp_val(val, 0, 0x3f); + break; + + case PMBUS_VIRT_SAMPLES: + val = clamp_val(val, 1, 1 << PK_MIN_AVG_AVG_CNT); + val = ilog2(val); + break; + } + + return val; +} + +static int tps25990_write_word(struct i2c_client *client, + int page, int reg, u16 value) +{ + int addr, ret; + + addr = tps25990_get_addr(reg); + if (addr < 0) + return addr; + + value = tps25990_write_adapt_value(reg, value); + + switch (reg) { + case PMBUS_VIRT_SAMPLES: + ret = pmbus_update_byte_data(client, page, addr, + PK_MIN_AVG_AVG_CNT, + FIELD_PREP(PK_MIN_AVG_AVG_CNT, value)); + break; + + case PMBUS_IIN_OC_FAULT_LIMIT: + ret = pmbus_write_byte_data(client, page, addr, + value); + break; + + default: + ret = pmbus_write_word_data(client, page, addr, value); + break; + } + + return ret; +} + +#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR) +static const struct regulator_desc tps25990_reg_desc[] = { + PMBUS_REGULATOR_ONE("vout"), +}; +#endif + +static const struct pmbus_driver_info tps25990_base_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 5251, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -2, + .format[PSC_VOLTAGE_OUT] = direct, + .m[PSC_VOLTAGE_OUT] = 5251, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = -2, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 140, + .b[PSC_TEMPERATURE] = 32100, + .R[PSC_TEMPERATURE] = -2, + /* + * Current and Power measurement depends on the ohm value + * of Rimon. m is multiplied by 1000 below to have an integer + * and -3 is added to R to compensate. + */ + .format[PSC_CURRENT_IN] = direct, + .m[PSC_CURRENT_IN] = 9538, + .b[PSC_CURRENT_IN] = 0, + .R[PSC_CURRENT_IN] = -6, + .format[PSC_POWER] = direct, + .m[PSC_POWER] = 4901, + .b[PSC_POWER] = 0, + .R[PSC_POWER] = -7, + .func[0] = (PMBUS_HAVE_VIN | + PMBUS_HAVE_VOUT | + PMBUS_HAVE_VMON | + PMBUS_HAVE_IIN | + PMBUS_HAVE_PIN | + PMBUS_HAVE_TEMP | + PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_SAMPLES), + .read_word_data = tps25990_read_word, + .write_word_data = tps25990_write_word, + .groups = tps25990_groups, + +#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR) + .reg_desc = tps25990_reg_desc, + .num_regulators = ARRAY_SIZE(tps25990_reg_desc), +#endif +}; + +static const struct i2c_device_id tps25990_i2c_id[] = { + { "tps25990" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, tps25990_i2c_id); + +static const struct of_device_id tps25990_of_match[] = { + { .compatible = "ti,tps25990" }, + {} +}; +MODULE_DEVICE_TABLE(of, tps25990_of_match); + +static int tps25990_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct pmbus_driver_info *info; + u32 rimon = TPS25990_DEFAULT_RIMON; + int ret; + + ret = device_property_read_u32(dev, "ti,rimon-milli-ohms", &rimon); + if (ret == -EINVAL) { + dev_warn(dev, + "using default rimon: current and power scale possibly wrong\n"); + } else if (ret < 0) { + return dev_err_probe(dev, ret, "failed get rimon\n"); + } + + /* + * TPS25990 may be stacked with several TPS25895, allowing a higher + * current. The higher the allowed current is, the lower rimon + * will be. How low it can realistically get is unknown. + * To avoid problems with precision later on, rimon is provided in + * milli Ohms. This is a precaution to keep a stable ABI. + * At the moment, doing the calculation with rimon in milli Ohms + * would overflow the s32 'm' in the direct conversion. Convert it + * back to Ohms until greater precision is actually needed. + */ + rimon /= 1000; + + info = devm_kmemdup(dev, &tps25990_base_info, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + /* Adapt the current and power scale for each instance */ + info->m[PSC_CURRENT_IN] *= rimon; + info->m[PSC_POWER] *= rimon; + + ret = pmbus_do_probe(client, info); + if (ret < 0) + return ret; + + return tps25990_init_debugfs(client); +} + +static struct i2c_driver tps25990_driver = { + .driver = { + .name = "tps25990", + .of_match_table = tps25990_of_match, + }, + .probe = tps25990_probe, + .id_table = tps25990_i2c_id, +}; +module_i2c_driver(tps25990_driver); + +MODULE_AUTHOR("Jerome Brunet "); +MODULE_DESCRIPTION("PMBUS driver for TPS25990 eFuse"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS);