From patchwork Fri Sep 20 16:56:14 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jerome Brunet X-Patchwork-Id: 13808637 Received: from mail-wm1-f43.google.com (mail-wm1-f43.google.com [209.85.128.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7B26E183094 for ; Fri, 20 Sep 2024 16:56:45 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.43 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726851408; cv=none; b=lT8qBMMRWc3sI2ZaGyl07E2zV//5qpqRpEsRZY7A49AUdXzvQy4Uher04YL0SQdcSKqJQmpptbquK0uvp7QCpeKQumnjfZijkv08qeM4BKSs9HvEfPVoemeioIWmvu0A5alufqIQ1micOc4oQ9nE2yFGQdeAaA+SMfSy40/RDCI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726851408; c=relaxed/simple; bh=UgtO+3cWXVEcCkUu4pfa3jXNe3npwZ44KY1zNE8lug8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=E/uAKuuxqZkRNwJLp73r9zPDttzqUlpViAvaHit3243PJWLaF/jRsrQDaZari5JuRbWZIEzoAqdhA8CBrzrrg9f1XM8aVSoDLu36Q1vFxuHBpm2AXWQS89aPZGtxXV+4pdn3butNQdAHEiW5GAoKmPa+x4OwIEnMSPgPMZsTyqE= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com; spf=pass smtp.mailfrom=baylibre.com; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b=1vHoosNh; arc=none smtp.client-ip=209.85.128.43 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=baylibre.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=baylibre.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=baylibre-com.20230601.gappssmtp.com header.i=@baylibre-com.20230601.gappssmtp.com header.b="1vHoosNh" Received: by mail-wm1-f43.google.com with SMTP id 5b1f17b1804b1-42cb1e623d1so20417655e9.0 for ; Fri, 20 Sep 2024 09:56:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=baylibre-com.20230601.gappssmtp.com; s=20230601; t=1726851404; x=1727456204; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=zlqM3Wq2LMBkFmA2JX6btIgMsHeJfMjg4hSFeS+f3ZA=; b=1vHoosNh8SWONZFSikeXnU0VK5dVxgOBLQYA5Qg6TegN9xKy3sHCKMhGLpT5QmUPL4 71snRIOzH6nLTmGjW25QS0Fte55QD/15mGNNGRIATN3HBS+fghJRCP7GL+ADkDzZadqR LRx+Ff4Dqz2gTpM/svZgCMtepll1xstP1nveNmKOo0ft6AzdYwR/ws0qWmKK3AUVVB8i 2kA+wXYBrpCFjw3HV1BLCVqbR0BBAccOn5buJZCykjtbUNvCfVSuqOS1YmCXMZmx4ZQe i8h0nnHIq63To+p9bP+gQqWmXrsVZA/OfFHxVd2F/pHrllKM8T7HH245F7e45pQcrt5E 39jQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1726851404; x=1727456204; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=zlqM3Wq2LMBkFmA2JX6btIgMsHeJfMjg4hSFeS+f3ZA=; b=uROzREYyWJCqS0Ay6pxq1uVQiivOWcuJIMe0DAqh7+BmEHYgqV34qfenyXNWJDBAjO eQ7JtY5r9uilBjPhdAp+yYjk2hlbwlnOmDbXd1AYRxVzKxlNLhpLw5A5fdFjMSgQJTYN VYlJD+dn1elQE4AMlw6XGljt5UgCr0sxM/srRq+PQDAEIObgcdXqIrUSC9ugrZUHya94 nWFK3hbkUL/BTDVHcFfQs7IQioDkKdvX9vVpfdmyR6l+WtaUv6BG5rrSLylNdb0dfnl6 pz/eCTWVdnEWY29dVhn3tJYslU4HSaa2lQkB3KPvZVuz3X1P8gvVRtSGbGELQKlvHH/Y NTzQ== X-Gm-Message-State: AOJu0Yzyg39u7O4dVqkWhbi62BQub+b1tPR40SaFHu9vQqIwJuwUzW3O Mh6SZET9YVfRPpAHiBhE9dH2LVxnCInm8n22nGXvnquyq5vU3h/GDxg5x+GWjN4= X-Google-Smtp-Source: AGHT+IG6Gl6Xf33ZpH5wBoFvM9jlClYdpKUap5d5TKoMTLI9z8bm0sV3RKZOCxo+FeAmimsuIwxYNA== X-Received: by 2002:adf:f791:0:b0:373:54c:26a4 with SMTP id ffacd0b85a97d-37a42380d5cmr2263515f8f.54.1726851403615; Fri, 20 Sep 2024 09:56:43 -0700 (PDT) Received: from toaster.baylibre.com ([2a01:e0a:3c5:5fb1:8e69:83a7:a29a:ba83]) by smtp.googlemail.com with ESMTPSA id 5b1f17b1804b1-42e6c718e40sm97430135e9.1.2024.09.20.09.56.42 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 20 Sep 2024 09:56:43 -0700 (PDT) From: Jerome Brunet Date: Fri, 20 Sep 2024 18:56:14 +0200 Subject: [PATCH v2 3/3] hwmon: (pmbus/tps25990): add initial support Precedence: bulk X-Mailing-List: linux-hwmon@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240920-tps25990-v2-3-f3e39bce5173@baylibre.com> References: <20240920-tps25990-v2-0-f3e39bce5173@baylibre.com> In-Reply-To: <20240920-tps25990-v2-0-f3e39bce5173@baylibre.com> To: Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jerome Brunet , Jonathan Corbet , Delphine CC Chiu , Naresh Solanki , Patrick Rudolph Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=openpgp-sha256; l=17286; i=jbrunet@baylibre.com; h=from:subject:message-id; bh=UgtO+3cWXVEcCkUu4pfa3jXNe3npwZ44KY1zNE8lug8=; b=owEBbQKS/ZANAwAKAeb8Dxw38tqFAcsmYgBm7alGRaKtRDsIMYChQFtqGTkxhgAa3J/6VLsCC 1T7XISomguJAjMEAAEKAB0WIQT04VmuGPP1bV8btxvm/A8cN/LahQUCZu2pRgAKCRDm/A8cN/La hbUtD/9Uh5tsJSPA5EP2pTgBHiPWGlsWRMRyyA9plPxQXT7qylEgLZNt+syGcQB7xv+5Zz4KUD8 Jqjg+X/5v87vKmRAA6njNh1rGqtr0qpylXFrEqVTu0FOT5/A4uBZ0u7EVSGnG8IZFwFHRdt5FFI qDGByGtZ5P1sYXHeKdXkItuT79FNdPcYBA5UJKW2tGKSlXqYk6lzDkDh/7cfW4OCA2HwIe1mJw6 jLPde/YfvzU3dcAgBtXHMrBZ3WgrADvpALEM6ts9MAefZ9cWDrTL9MMcRwaTRVf3LzGHfL1VE18 +BmTO7M0RGJbGMDNWJLGW7cpZJP+sI4e5wbcDvt1eAGpv9bV19Wx+U1po6iqpLZv8eQckx0pcUu EfBG4U81i39RwH+8JUlHtIdyb+k3BWdbnqS27F1k6CFrf6pVPTlUZOrLgZ5Xq+FEplfPDGAQLff f73CdcLc7s+wZ357ezQ6Pnju/oJ4gDGsEkQw9zkgEClTfN6mHeu5YIdoRvvCqd7TJ0jCI7H3bt5 QbRLnYzciUKjDB4LMP+IQV6DTUYJd+NBJ4piRpZbgxOqFZo16WsIH8NsIf6u/eKjFIskeMWdDO4 ZBHTSd+VJwhtj1RiIFWY9+ZYDPSVocFPrVPwSh5ZeQcGL9wytTl1c4iS2TbbXYTquCwmUjJSd5t TEvGTiT3G93VXBQ== X-Developer-Key: i=jbrunet@baylibre.com; a=openpgp; fpr=F29F26CF27BAE1A9719AE6BDC3C92AAF3E60AED9 Add initial support for the Texas Instruments TPS25990 eFuse. This adds the basic PMBUS telemetry support for the device. Signed-off-by: Jerome Brunet --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/tps25990.rst | 148 ++++++++++++++ drivers/hwmon/pmbus/Kconfig | 17 ++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/tps25990.c | 427 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 594 insertions(+) diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index ea3b5be8fe4f..205ed31c66ff 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -234,6 +234,7 @@ Hardware Monitoring Kernel Drivers tmp464 tmp513 tps23861 + tps25990 tps40422 tps53679 tps546d24 diff --git a/Documentation/hwmon/tps25990.rst b/Documentation/hwmon/tps25990.rst new file mode 100644 index 000000000000..ed9e74d43e2c --- /dev/null +++ b/Documentation/hwmon/tps25990.rst @@ -0,0 +1,148 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver tps25990 +====================== + +Supported chips: + + * TI TPS25990 + + Prefix: 'tps25990' + + * Datasheet + + Publicly available at Texas Instruments website: https://www.ti.com/lit/gpn/tps25990 + +Author: + + Jerome Brunet + +Description +----------- + +This driver implements support for TI TPS25990 eFuse. +This is an integrated, high-current circuit protection and power +management device with PMBUS interface + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct format for reading input voltages, +output voltage, input current, input power and temperature. + +Due to the specificities of the chip, all history reset attributes +are tied together. Resetting the history of a sensor, resets the +history of all the sensors. + +The driver exports the following attributes via the 'sysfs' files +for input current: + +**curr1_average** + +**curr1_crit** + +**curr1_crit_alarm** + +**curr1_highest** + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +**curr1_reset_history** + +The driver provides the following attributes for main input voltage: + +**in1_average** + +**in1_crit** + +**in1_crit_alarm** + +**in1_highest** + +**in1_input** + +**in1_label** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_lowest** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +**in1_reset_history** + +The driver provides the following attributes for auxiliary input voltage: + +**in2_input** + +**in2_label** + +The driver provides the following attributes for output voltage: + +**in3_average** + +**in3_input** + +**in3_label** + +**in3_lowest** + +**in3_min** + +**in3_min_alarm** + +**in3_reset_history** + +The driver provides the following attributes for input power: + +**power1_alarm** + +**power1_average** + +**power1_input** + +**power1_input_highest** + +**power1_label** + +**power1_max** + +**power1_reset_history** + +The driver provides the following attributes for temperature: + +**temp1_average** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_highest** + +**temp1_input** + +**temp1_max** + +**temp1_max_alarm** + +**temp1_reset_history** + +The driver provides the following attributes for sampling: + +**samples** + diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index a4f02cad92fd..a3fd442e0277 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -510,6 +510,23 @@ config SENSORS_TDA38640_REGULATOR If you say yes here you get regulator support for Infineon TDA38640 as regulator. +config SENSORS_TPS25990 + tristate "TI TPS25990" + help + If you say yes here you get hardware monitoring support for TI + TPS25990. + + This driver can also be built as a module. If so, the module will + be called tps25990. + +config SENSORS_TPS25990_REGULATOR + bool "Regulator support for TPS25990 and compatibles" + depends on SENSORS_TPS25990 && REGULATOR + default SENSORS_TPS25990 + help + If you say yes here you get regulator support for Texas Instruments + TPS25990. + config SENSORS_TPS40422 tristate "TI TPS40422" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index d00bcc758b97..3d3183f8d2a7 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o obj-$(CONFIG_SENSORS_TDA38640) += tda38640.o +obj-$(CONFIG_SENSORS_TPS25990) += tps25990.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o obj-$(CONFIG_SENSORS_TPS546D24) += tps546d24.o diff --git a/drivers/hwmon/pmbus/tps25990.c b/drivers/hwmon/pmbus/tps25990.c new file mode 100644 index 000000000000..03848d671c10 --- /dev/null +++ b/drivers/hwmon/pmbus/tps25990.c @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2024 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include +#include +#include + +#include "pmbus.h" + +#define TPS25990_READ_VAUX 0xd0 +#define TPS25990_READ_VIN_MIN 0xd1 +#define TPS25990_READ_VIN_PEAK 0xd2 +#define TPS25990_READ_IIN_PEAK 0xd4 +#define TPS25990_READ_PIN_PEAK 0xd5 +#define TPS25990_READ_TEMP_AVG 0xd6 +#define TPS25990_READ_TEMP_PEAK 0xd7 +#define TPS25990_READ_VOUT_MIN 0xda +#define TPS25990_READ_VIN_AVG 0xdc +#define TPS25990_READ_VOUT_AVG 0xdd +#define TPS25990_READ_IIN_AVG 0xde +#define TPS25990_READ_PIN_AVG 0xdf +#define TPS25990_VIREF 0xe0 +#define TPS25990_PK_MIN_AVG 0xea +#define PK_MIN_AVG_RST_PEAK BIT(7) +#define PK_MIN_AVG_RST_AVG BIT(6) +#define PK_MIN_AVG_RST_MIN BIT(5) +#define PK_MIN_AVG_AVG_CNT GENMASK(2, 0) +#define TPS25990_MFR_WRITE_PROTECT 0xf8 +#define TPS25990_UNLOCKED BIT(7) + +#define TPS25990_8B_SHIFT 2 +#define TPS25990_VIN_OVF_NUM 525100 +#define TPS25990_VIN_OVF_DIV 10163 +#define TPS25990_VIN_OVF_OFF 155 +#define TPS25990_IIN_OCF_NUM 953800 +#define TPS25990_IIN_OCF_DIV 129278 +#define TPS25990_IIN_OCF_OFF 157 + +#define PK_MIN_AVG_RST_MASK (PK_MIN_AVG_RST_PEAK | \ + PK_MIN_AVG_RST_AVG | \ + PK_MIN_AVG_RST_MIN) + +/* + * Arbitrary default Rimon value: 1kOhm + * This correspond to an overcurrent limit of 55A, close to the specified limit + * of un-stacked TPS25990 and makes further calculation easier to setup in + * sensor.conf, if necessary + */ +#define TPS25990_DEFAULT_RIMON 1000000000 + +static void tps25990_set_m(int *m, u32 rimon) +{ + u64 val = ((u64)*m) * rimon; + + /* Make sure m fits the s32 type */ + *m = DIV_ROUND_CLOSEST_ULL(val, 1000000); +} + +static int tps25990_mfr_write_protect_set(struct i2c_client *client, + u8 protect) +{ + /* + * The chip has a single protection mode, set it regardless of + * the specific protection requested + */ + return pmbus_write_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT, + protect ? 0x0 : 0xa2); +} + +static int tps25990_mfr_write_protect_get(struct i2c_client *client) +{ + int ret = pmbus_read_byte_data(client, -1, TPS25990_MFR_WRITE_PROTECT); + + if (ret < 0) + return ret; + + return (ret & TPS25990_UNLOCKED) ? 0 : PB_WP_ALL; +} + +static int tps25990_read_word_data(struct i2c_client *client, + int page, int phase, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VIRT_READ_VIN_MAX: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_VIN_PEAK); + break; + + case PMBUS_VIRT_READ_VIN_MIN: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_VIN_MIN); + break; + + case PMBUS_VIRT_READ_VIN_AVG: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_VIN_AVG); + break; + + case PMBUS_VIRT_READ_VOUT_MIN: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_VOUT_MIN); + break; + + case PMBUS_VIRT_READ_VOUT_AVG: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_VOUT_AVG); + break; + + case PMBUS_VIRT_READ_IIN_AVG: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_IIN_AVG); + break; + + case PMBUS_VIRT_READ_IIN_MAX: + return TPS25990_READ_IIN_PEAK; + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_IIN_PEAK); + break; + + case PMBUS_VIRT_READ_TEMP_AVG: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_TEMP_AVG); + break; + + case PMBUS_VIRT_READ_TEMP_MAX: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_TEMP_PEAK); + break; + + case PMBUS_VIRT_READ_PIN_AVG: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_PIN_AVG); + break; + + case PMBUS_VIRT_READ_PIN_MAX: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_PIN_PEAK); + break; + + case PMBUS_VIRT_READ_VMON: + ret = pmbus_read_word_data(client, page, phase, + TPS25990_READ_VAUX); + break; + + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_OT_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * These registers provide an 8 bits value instead of a + * 10bits one. Just shifting twice the register value is + * enough to make the sensor type conversion work, even + * if the datasheet provides different m, b and R for + * those. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + break; + ret <<= TPS25990_8B_SHIFT; + break; + + case PMBUS_VIN_OV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + break; + ret = DIV_ROUND_CLOSEST(ret * TPS25990_VIN_OVF_NUM, + TPS25990_VIN_OVF_DIV); + ret += TPS25990_VIN_OVF_OFF; + break; + + case PMBUS_IIN_OC_FAULT_LIMIT: + /* + * VIREF directly sets the over-current limit at which the eFuse + * will turn the FET off and trigger a fault. Expose it through + * this generic property instead of a manufacturer specific one. + */ + ret = pmbus_read_byte_data(client, page, TPS25990_VIREF); + if (ret < 0) + break; + ret = DIV_ROUND_CLOSEST(ret * TPS25990_IIN_OCF_NUM, + TPS25990_IIN_OCF_DIV); + ret += TPS25990_IIN_OCF_OFF; + break; + + case PMBUS_VIRT_SAMPLES: + ret = pmbus_read_byte_data(client, page, TPS25990_PK_MIN_AVG); + if (ret < 0) + break; + ret = 1 << FIELD_GET(PK_MIN_AVG_AVG_CNT, ret); + break; + + case PMBUS_VIRT_RESET_TEMP_HISTORY: + case PMBUS_VIRT_RESET_VIN_HISTORY: + case PMBUS_VIRT_RESET_IIN_HISTORY: + case PMBUS_VIRT_RESET_PIN_HISTORY: + case PMBUS_VIRT_RESET_VOUT_HISTORY: + ret = 0; + break; + + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int tps25990_write_word_data(struct i2c_client *client, + int page, int reg, u16 value) +{ + int ret; + + switch (reg) { + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VOUT_UV_WARN_LIMIT: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_OT_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_PIN_OP_WARN_LIMIT: + value >>= TPS25990_8B_SHIFT; + value = clamp_val(value, 0, 0xff); + ret = pmbus_write_word_data(client, page, reg, value); + break; + + case PMBUS_VIN_OV_FAULT_LIMIT: + value -= TPS25990_VIN_OVF_OFF; + value = DIV_ROUND_CLOSEST(((unsigned int)value) * TPS25990_VIN_OVF_DIV, + TPS25990_VIN_OVF_NUM); + value = clamp_val(value, 0, 0xf); + ret = pmbus_write_word_data(client, page, reg, value); + break; + + case PMBUS_IIN_OC_FAULT_LIMIT: + value -= TPS25990_IIN_OCF_OFF; + value = DIV_ROUND_CLOSEST(((unsigned int)value) * TPS25990_IIN_OCF_DIV, + TPS25990_IIN_OCF_NUM); + value = clamp_val(value, 0, 0x3f); + ret = pmbus_write_byte_data(client, page, TPS25990_VIREF, value); + break; + + case PMBUS_VIRT_SAMPLES: + value = clamp_val(value, 1, 1 << PK_MIN_AVG_AVG_CNT); + value = ilog2(value); + ret = pmbus_update_byte_data(client, page, TPS25990_PK_MIN_AVG, + PK_MIN_AVG_AVG_CNT, + FIELD_PREP(PK_MIN_AVG_AVG_CNT, value)); + break; + + case PMBUS_VIRT_RESET_TEMP_HISTORY: + case PMBUS_VIRT_RESET_VIN_HISTORY: + case PMBUS_VIRT_RESET_IIN_HISTORY: + case PMBUS_VIRT_RESET_PIN_HISTORY: + case PMBUS_VIRT_RESET_VOUT_HISTORY: + /* + * TPS25990 has history resets based on MIN/AVG/PEAK instead of per + * sensor type. Exposing this quirk in hwmon is not desirable so + * reset MIN, AVG and PEAK together. Even is there effectively only + * one reset, which resets everything, expose the 5 entries so + * userspace is not required map a sensor type to another to trigger + * a reset + */ + ret = pmbus_update_byte_data(client, 0, TPS25990_PK_MIN_AVG, + PK_MIN_AVG_RST_MASK, + PK_MIN_AVG_RST_MASK); + break; + + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int tps25990_read_byte_data(struct i2c_client *client, + int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_WRITE_PROTECT: + ret = tps25990_mfr_write_protect_get(client); + break; + + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int tps25990_write_byte_data(struct i2c_client *client, + int page, int reg, u8 byte) +{ + int ret; + + switch (reg) { + case PMBUS_WRITE_PROTECT: + ret = tps25990_mfr_write_protect_set(client, byte); + break; + + default: + ret = -ENODATA; + break; + } + + return ret; +} + +#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR) +static const struct regulator_desc tps25990_reg_desc[] = { + PMBUS_REGULATOR_ONE("vout"), +}; +#endif + +static const struct pmbus_driver_info tps25990_base_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = direct, + .m[PSC_VOLTAGE_IN] = 5251, + .b[PSC_VOLTAGE_IN] = 0, + .R[PSC_VOLTAGE_IN] = -2, + .format[PSC_VOLTAGE_OUT] = direct, + .m[PSC_VOLTAGE_OUT] = 5251, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = -2, + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 140, + .b[PSC_TEMPERATURE] = 32100, + .R[PSC_TEMPERATURE] = -2, + /* + * Current and Power measurement depends on the ohm value + * of Rimon. m is multiplied by 1000 below to have an integer + * and -3 is added to R to compensate. + */ + .format[PSC_CURRENT_IN] = direct, + .m[PSC_CURRENT_IN] = 9538, + .b[PSC_CURRENT_IN] = 0, + .R[PSC_CURRENT_IN] = -6, + .format[PSC_POWER] = direct, + .m[PSC_POWER] = 4901, + .b[PSC_POWER] = 0, + .R[PSC_POWER] = -7, + .func[0] = (PMBUS_HAVE_VIN | + PMBUS_HAVE_VOUT | + PMBUS_HAVE_VMON | + PMBUS_HAVE_IIN | + PMBUS_HAVE_PIN | + PMBUS_HAVE_TEMP | + PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_STATUS_INPUT | + PMBUS_HAVE_STATUS_TEMP | + PMBUS_HAVE_SAMPLES), + .read_word_data = tps25990_read_word_data, + .write_word_data = tps25990_write_word_data, + .read_byte_data = tps25990_read_byte_data, + .write_byte_data = tps25990_write_byte_data, + +#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR) + .reg_desc = tps25990_reg_desc, + .num_regulators = ARRAY_SIZE(tps25990_reg_desc), +#endif +}; + +static const struct i2c_device_id tps25990_i2c_id[] = { + { "tps25990" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, tps25990_i2c_id); + +static const struct of_device_id tps25990_of_match[] = { + { .compatible = "ti,tps25990" }, + {} +}; +MODULE_DEVICE_TABLE(of, tps25990_of_match); + +static int tps25990_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct pmbus_driver_info *info; + u32 rimon = TPS25990_DEFAULT_RIMON; + int ret; + + ret = device_property_read_u32(dev, "ti,rimon-micro-ohms", &rimon); + if (ret < 0 && ret != -EINVAL) + return dev_err_probe(dev, ret, "failed to get rimon\n"); + + info = devm_kmemdup(dev, &tps25990_base_info, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + /* Adapt the current and power scale for each instance */ + tps25990_set_m(&info->m[PSC_CURRENT_IN], rimon); + tps25990_set_m(&info->m[PSC_POWER], rimon); + + return pmbus_do_probe(client, info); +} + +static struct i2c_driver tps25990_driver = { + .driver = { + .name = "tps25990", + .of_match_table = tps25990_of_match, + }, + .probe = tps25990_probe, + .id_table = tps25990_i2c_id, +}; +module_i2c_driver(tps25990_driver); + +MODULE_AUTHOR("Jerome Brunet "); +MODULE_DESCRIPTION("PMBUS driver for TPS25990 eFuse"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS);