Message ID | 20250108-dev-max15303-v1-1-9154eb2c9d9e@analog.com (mailing list archive) |
---|---|
State | Accepted |
Headers | show |
Series | hwmon: (pmbus/max15301): add support for MAX15303 | expand |
On Wed, Jan 08, 2025 at 04:44:23PM +0000, Nuno Sa via B4 Relay wrote: > From: Nuno Sa <nuno.sa@analog.com> > > The MAX15303 is a full-featured, flexible, efficient, 6A digital > point-of-load (PoL) controller with integrated switching MOSFETs. It > contains advanced power management and telemetry features. > > Tested-by: Robin Getz <rgetz503@gmail.com> > Signed-off-by: Nuno Sa <nuno.sa@analog.com> Applied. Thanks, Guenter
diff --git a/Documentation/hwmon/max15301.rst b/Documentation/hwmon/max15301.rst index e3dc22fe1c6d0035593e59481a610452eec8abf9..e2222e98304fda5885b94bc37c0f1f16474ed271 100644 --- a/Documentation/hwmon/max15301.rst +++ b/Documentation/hwmon/max15301.rst @@ -13,6 +13,14 @@ Supported chips: Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf + * Maxim MAX15303 + + Prefix: 'max15303' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max15303.pdf + Author: Erik Rosen <erik.rosen@metormote.com> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 233533e28f7678c41bc1973ebcc3b53b10854baf..419469f40ba0283c72b71071566efec575263e98 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -260,7 +260,7 @@ config SENSORS_MAX15301 tristate "Maxim MAX15301" help If you say yes here you get hardware monitoring support for Maxim - MAX15301, as well as for Flex BMR461. + MAX15301, MAX15303, as well as for Flex BMR461. This driver can also be built as a module. If so, the module will be called max15301. diff --git a/drivers/hwmon/pmbus/max15301.c b/drivers/hwmon/pmbus/max15301.c index 50dfd477772ffe680446b5c0bf31d45a70042d27..d5810b88ea8d8dad151e2597da205dbab6155ae1 100644 --- a/drivers/hwmon/pmbus/max15301.c +++ b/drivers/hwmon/pmbus/max15301.c @@ -25,6 +25,7 @@ static const struct i2c_device_id max15301_id[] = { { "bmr461" }, { "max15301" }, + { "max15303" }, {} }; MODULE_DEVICE_TABLE(i2c, max15301_id);