Message ID | 20250207132806.3113268-1-naresh.solanki@9elements.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | [1/2] dt-bindings: hwmon: ir38060: Move & update dt binding | expand |
On Fri, 07 Feb 2025 18:58:03 +0530, Naresh Solanki wrote: > Move dt binding under hwmon/pmbus & align accordingly. > > Previously the DT binding was invalid & wouldn't work with pmbus driver. > Pmbus driver expects a regulator node & hence added the same. > > Fixes: 1d333cd641fb ("ARM: dts: aspeed: sbp1: IBM sbp1 BMC board") > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> > --- > Changes in V2: > 1. Update commit message > 2. Add Fixes tags > --- > .../hwmon/pmbus/infineon,ir38060.yaml | 61 +++++++++++++++++++ > .../bindings/regulator/infineon,ir38060.yaml | 45 -------------- > 2 files changed, 61 insertions(+), 45 deletions(-) > create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > delete mode 100644 Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250207132806.3113268-1-naresh.solanki@9elements.com: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dtb: ethernet-phy@0: 'reg' is a required property from schema $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
On Fri, Feb 07, 2025 at 06:58:03PM +0530, Naresh Solanki wrote: > Move dt binding under hwmon/pmbus & align accordingly. > > Previously the DT binding was invalid & wouldn't work with pmbus driver. > Pmbus driver expects a regulator node & hence added the same. 2 out of 3 (schema, dts, driver) agree. Fix the driver. > > Fixes: 1d333cd641fb ("ARM: dts: aspeed: sbp1: IBM sbp1 BMC board") > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> > --- > Changes in V2: > 1. Update commit message > 2. Add Fixes tags > --- > .../hwmon/pmbus/infineon,ir38060.yaml | 61 +++++++++++++++++++ > .../bindings/regulator/infineon,ir38060.yaml | 45 -------------- > 2 files changed, 61 insertions(+), 45 deletions(-) > create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > delete mode 100644 Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml > > diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > new file mode 100644 > index 000000000000..e1f683846a54 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > @@ -0,0 +1,61 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,ir38060.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Infineon Buck Regulators with PMBUS interfaces > + > +maintainers: > + - Not Me. Nothing new here, but WTF. Expect a meta-schema change to warn on this. Rob
On Wed, Feb 12, 2025 at 11:57:13AM -0600, Rob Herring wrote: > On Fri, Feb 07, 2025 at 06:58:03PM +0530, Naresh Solanki wrote: > > Move dt binding under hwmon/pmbus & align accordingly. > > > > Previously the DT binding was invalid & wouldn't work with pmbus driver. > > Pmbus driver expects a regulator node & hence added the same. > > 2 out of 3 (schema, dts, driver) agree. Fix the driver. > > > > > Fixes: 1d333cd641fb ("ARM: dts: aspeed: sbp1: IBM sbp1 BMC board") > > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> > > --- > > Changes in V2: > > 1. Update commit message > > 2. Add Fixes tags > > --- > > .../hwmon/pmbus/infineon,ir38060.yaml | 61 +++++++++++++++++++ > > .../bindings/regulator/infineon,ir38060.yaml | 45 -------------- > > 2 files changed, 61 insertions(+), 45 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > > delete mode 100644 Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml > > > > diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > > new file mode 100644 > > index 000000000000..e1f683846a54 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml > > @@ -0,0 +1,61 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,ir38060.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Infineon Buck Regulators with PMBUS interfaces > > + > > +maintainers: > > + - Not Me. > > Nothing new here, but WTF. Expect a meta-schema change to warn on this. And it was fucking me that did it, that's the best/worst part about it.
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml new file mode 100644 index 000000000000..e1f683846a54 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,ir38060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon Buck Regulators with PMBUS interfaces + +maintainers: + - Not Me. + +properties: + compatible: + enum: + - infineon,ir38060 + - infineon,ir38064 + - infineon,ir38164 + - infineon,ir38263 + + reg: + maxItems: 1 + + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@34 { + compatible = "infineon,ir38060"; + reg = <0x34>; + + regulators { + vout { + regulator-name = "p5v_aux"; + regulator-min-microvolt = <437500>; + regulator-max-microvolt = <1387500>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml b/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml deleted file mode 100644 index e6ffbc2a2298..000000000000 --- a/Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Infineon Buck Regulators with PMBUS interfaces - -maintainers: - - Not Me. - -allOf: - - $ref: regulator.yaml# - -properties: - compatible: - enum: - - infineon,ir38060 - - infineon,ir38064 - - infineon,ir38164 - - infineon,ir38263 - - reg: - maxItems: 1 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - regulator@34 { - compatible = "infineon,ir38060"; - reg = <0x34>; - - regulator-min-microvolt = <437500>; - regulator-max-microvolt = <1387500>; - }; - };
Move dt binding under hwmon/pmbus & align accordingly. Previously the DT binding was invalid & wouldn't work with pmbus driver. Pmbus driver expects a regulator node & hence added the same. Fixes: 1d333cd641fb ("ARM: dts: aspeed: sbp1: IBM sbp1 BMC board") Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> --- Changes in V2: 1. Update commit message 2. Add Fixes tags --- .../hwmon/pmbus/infineon,ir38060.yaml | 61 +++++++++++++++++++ .../bindings/regulator/infineon,ir38060.yaml | 45 -------------- 2 files changed, 61 insertions(+), 45 deletions(-) create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/infineon,ir38060.yaml delete mode 100644 Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml base-commit: bfbb730c4255e1965d202f48e7aa71baa9a7c65b