@@ -437,7 +437,7 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
static const struct regulator_desc lm25066_reg_desc[] = {
- PMBUS_REGULATOR_ONE("vout"),
+ PMBUS_REGULATOR_ONE_NODE("vout"),
};
#endif
@@ -51,8 +51,8 @@ static const struct regulator_desc mpq7932_regulators_desc[] = {
};
static const struct regulator_desc mpq7932_regulators_desc_one[] = {
- PMBUS_REGULATOR_STEP_ONE("buck", MPQ7932_N_VOLTAGES,
- MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
+ PMBUS_REGULATOR_STEP_ONE_NODE("buck", MPQ7932_N_VOLTAGES,
+ MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN),
};
#endif
@@ -508,11 +508,11 @@ int pmbus_regulator_init_cb(struct regulator_dev *rdev,
#define PMBUS_REGULATOR(_name, _id) PMBUS_REGULATOR_STEP(_name, _id, 0, 0, 0)
-#define PMBUS_REGULATOR_STEP_ONE(_name, _voltages, _step, _min_uV) \
+#define __PMBUS_REGULATOR_STEP_ONE(_name, _node, _voltages, _step, _min_uV) \
{ \
.name = (_name), \
.of_match = of_match_ptr(_name), \
- .regulators_node = of_match_ptr("regulators"), \
+ .regulators_node = of_match_ptr(_node), \
.ops = &pmbus_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
@@ -522,7 +522,19 @@ int pmbus_regulator_init_cb(struct regulator_dev *rdev,
.init_cb = pmbus_regulator_init_cb, \
}
-#define PMBUS_REGULATOR_ONE(_name) PMBUS_REGULATOR_STEP_ONE(_name, 0, 0, 0)
+/*
+ * _NODE macros are defined for historic reasons and MUST NOT be used in new
+ * drivers.
+ */
+#define PMBUS_REGULATOR_STEP_ONE_NODE(_name, _voltages, _step, _min_uV) \
+ __PMBUS_REGULATOR_STEP_ONE(_name, "regulators", _voltages, _step, _min_uV)
+
+#define PMBUS_REGULATOR_ONE_NODE(_name) PMBUS_REGULATOR_STEP_ONE_NODE(_name, 0, 0, 0)
+
+#define PMBUS_REGULATOR_STEP_ONE(_name, _voltages, _step, _min_uV) \
+ __PMBUS_REGULATOR_STEP_ONE(_name, NULL, _voltages, _step, _min_uV)
+
+#define PMBUS_REGULATOR_ONE(_name) PMBUS_REGULATOR_STEP_ONE(_name, 0, 0, 0)
/* Function declarations */
@@ -15,7 +15,7 @@
#include "pmbus.h"
static const struct regulator_desc __maybe_unused tda38640_reg_desc[] = {
- PMBUS_REGULATOR_ONE("vout"),
+ PMBUS_REGULATOR_ONE_NODE("vout"),
};
struct tda38640_data {
@@ -333,7 +333,7 @@ static int tps25990_write_byte_data(struct i2c_client *client,
#if IS_ENABLED(CONFIG_SENSORS_TPS25990_REGULATOR)
static const struct regulator_desc tps25990_reg_desc[] = {
- PMBUS_REGULATOR_ONE("vout"),
+ PMBUS_REGULATOR_ONE_NODE("vout"),
};
#endif
Single-channel regulators do not need and should not have a "regulators" node. We can not entirely remove it due to existing bindings. To solve the problem for new drivers, provide additional macros PMBUS_REGULATOR_ONE_NODE and PMBUS_REGULATOR_STEP_ONE_NODE and convert existing drivers to use those macros. The exception is the ir38064 driver because its devicetree files and its description do not require or use the nested regulators node. Modify PMBUS_REGULATOR_STEP_ONE and PMBUS_REGULATOR_ONE to set the regulators_node pointer to NULL. Cc: Cedricjustine.Encarnacion@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- RFT: Untested. Open question is if not setting .regulators_node is sufficient to solve the problem. RFC: Open question is if existing bindings (if unused in-tree) should be converted to not require the nested "regulators" node. drivers/hwmon/pmbus/lm25066.c | 2 +- drivers/hwmon/pmbus/mpq7932.c | 4 ++-- drivers/hwmon/pmbus/pmbus.h | 18 +++++++++++++++--- drivers/hwmon/pmbus/tda38640.c | 2 +- drivers/hwmon/pmbus/tps25990.c | 2 +- 5 files changed, 20 insertions(+), 8 deletions(-)