| Message ID | f9cff1af48255fd988a7ead37c93aa32c60f7699.1692033412.git.mail@carsten-spiess.de (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | hwmon: (isl28022) new driver for ISL28022 power monitor | expand |
On Thu, Aug 17, 2023 at 04:29:20PM +0200, Carsten Spieß wrote: > Driver for Renesas ISL28022 power monitor with I2C interface. > The device monitors voltage, current via shunt resistor > and calculated power. > > Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> > --- > v4: > - no changes > v3: > - changelog added > v2/v3: > - hwmon input shunt voltage removed > - debugfs for shunt voltage read access added > - missing error handling added > - shunt resistor minimum and default value added > - properties reworked > - device_property_* instead of_property fixed > - possible overflows fixed > - MAINTAINERS order fixed > - documentation updated > --- > Documentation/hwmon/index.rst | 1 + > Documentation/hwmon/isl28022.rst | 63 ++++ > MAINTAINERS | 7 + > drivers/hwmon/Kconfig | 11 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/isl28022.c | 496 +++++++++++++++++++++++++++++++ > 6 files changed, 579 insertions(+) > create mode 100644 Documentation/hwmon/isl28022.rst > create mode 100644 drivers/hwmon/isl28022.c > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index d11924667f76..c9548fc5c40e 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -90,6 +90,7 @@ Hardware Monitoring Kernel Drivers > ir35221 > ir38064 > ir36021 > + isl28022 > isl68137 > it87 > jc42 > diff --git a/Documentation/hwmon/isl28022.rst b/Documentation/hwmon/isl28022.rst > new file mode 100644 > index 000000000000..8d4422a2dacd > --- /dev/null > +++ b/Documentation/hwmon/isl28022.rst > @@ -0,0 +1,63 @@ > +.. SPDX-License-Identifier: GPL-2.0-or-later > + > +Kernel driver isl28022 > +====================== > + > +Supported chips: > + > + * Renesas ISL28022 > + > + Prefix: 'isl28022' > + > + Addresses scanned: none > + > + Datasheet: Publicly available at the Renesas website > + > + https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf > + > +Author: > + Carsten Spieß <mail@carsten-spiess.de> > + > +Description > +----------- > + > +The ISL28022 is a power monitor with I2C interface. The device monitors > +voltage, current via shunt resistor and calculated power. > + > +Usage Notes > +----------- > + > +This driver does not auto-detect devices. You will have to instantiate the > +device explicitly. Please see Documentation/i2c/instantiating-devices.rst for > +details. > + > +The shunt value in micro-ohms, shunt voltage range and averaging can be set > +with device properties. > +Please refer to the Documentation/devicetree/bindings/hwmon/isl,isl28022.yaml > +for bindings if the device tree is used. > + > +The driver supports only shunt and bus continuous ADC mode at 15bit resolution. > +Averaging can be set from 1 to 128 samples (power of 2) on both channels. > +Shunt voltage range of 40, 80, 160 or 320mV is allowed > +The bus voltage range is 60V fixed. > + > +Sysfs entries > +------------- > + > +The following attributes are supported. All attributes are read-only. > + > +======================= ======================================================= > +in0_input bus voltage (milli Volt) > + > +curr1_input current (milli Ampere) > +power1_input power (micro Watt) > +======================= ======================================================= > + > +Debugfs entries > +--------------- > + > +The following attributes are supported. All attributes are read-only. > + > +======================= ======================================================= > +shunt_voltage shunt voltage (micro Volt) > +======================= ======================================================= > diff --git a/MAINTAINERS b/MAINTAINERS > index 7abb5710e1bb..b02e3b991676 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11065,6 +11065,13 @@ F: drivers/isdn/Makefile > F: drivers/isdn/hardware/ > F: drivers/isdn/mISDN/ > > +ISL28022 HARDWARE MONITORING DRIVER > +M: Carsten Spieß <mail@carsten-spiess.de> > +L: linux-hwmon@vger.kernel.org > +S: Maintained > +F: Documentation/hwmon/isl28022.rst > +F: drivers/hwmon/isl28022.c > + > ISOFS FILESYSTEM > M: Jan Kara <jack@suse.cz> > L: linux-fsdevel@vger.kernel.org > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 2913299c2c9e..3049c519e6ac 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -800,6 +800,17 @@ config SENSORS_CORETEMP > sensor inside your CPU. Most of the family 6 CPUs > are supported. Check Documentation/hwmon/coretemp.rst for details. > > +config SENSORS_ISL28022 > + tristate "Renesas ISL28022" > + depends on I2C > + select REGMAP_I2C > + help > + If you say yes here you get support for ISL28022 power monitor. > + Check Documentation/hwmon/isl28022.rst for details. > + > + This driver can also be built as a module. If so, the module > + will be called isl28022. > + > config SENSORS_IT87 > tristate "ITE IT87xx and compatibles" > depends on !PPC > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index ff6bfd109c72..4046fed7f48d 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -98,6 +98,7 @@ obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o > obj-$(CONFIG_SENSORS_INA238) += ina238.o > obj-$(CONFIG_SENSORS_INA3221) += ina3221.o > obj-$(CONFIG_SENSORS_INTEL_M10_BMC_HWMON) += intel-m10-bmc-hwmon.o > +obj-$(CONFIG_SENSORS_ISL28022) += isl28022.o > obj-$(CONFIG_SENSORS_IT87) += it87.o > obj-$(CONFIG_SENSORS_JC42) += jc42.o > obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o > diff --git a/drivers/hwmon/isl28022.c b/drivers/hwmon/isl28022.c > new file mode 100644 > index 000000000000..18b4481d5ff6 > --- /dev/null > +++ b/drivers/hwmon/isl28022.c > @@ -0,0 +1,496 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * isl28022.c - driver for Renesas ISL28022 power monitor chip monitoring > + * > + * Copyright (c) 2023 Carsten Spieß <mail@carsten-spiess.de> > + */ > + > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/slab.h> > +#include <linux/i2c.h> > +#include <linux/hwmon.h> > +#include <linux/hwmon-sysfs.h> Unnecessary include file. > +#include <linux/debugfs.h> > +#include <linux/err.h> > +#include <linux/of_device.h> > +#include <linux/regmap.h> > +#include <linux/util_macros.h> > +#include <linux/regulator/consumer.h> Aplhabetic include file order, please. > + > +/* ISL28022 registers */ > +#define ISL28022_REG_CONFIG 0x00 > +#define ISL28022_REG_SHUNT 0x01 > +#define ISL28022_REG_BUS 0x02 > +#define ISL28022_REG_POWER 0x03 > +#define ISL28022_REG_CURRENT 0x04 > +#define ISL28022_REG_CALIB 0x05 > +#define ISL28022_REG_SHUNT_THR 0x06 > +#define ISL28022_REG_BUS_THR 0x07 > +#define ISL28022_REG_INT 0x08 > +#define ISL28022_REG_AUX 0x09 > +#define ISL28022_REG_MAX ISL28022_REG_AUX > + > +/* ISL28022 config flags */ > +/* mode flags */ > +#define ISL28022_MODE_SHIFT 0 > +#define ISL28022_MODE_MASK 0x0007 > + > +#define ISL28022_MODE_PWR_DOWN 0x0 > +#define ISL28022_MODE_TRG_S 0x1 > +#define ISL28022_MODE_TRG_B 0x2 > +#define ISL28022_MODE_TRG_SB 0x3 > +#define ISL28022_MODE_ADC_OFF 0x4 > +#define ISL28022_MODE_CONT_S 0x5 > +#define ISL28022_MODE_CONT_B 0x6 > +#define ISL28022_MODE_CONT_SB 0x7 > + > +/* shunt ADC settings */ > +#define ISL28022_SADC_SHIFT 3 > +#define ISL28022_SADC_MASK 0x0078 > + > +#define ISL28022_BADC_SHIFT 7 > +#define ISL28022_BADC_MASK 0x0780 > + > +#define ISL28022_ADC_12 0x0 /* 12 bit ADC */ > +#define ISL28022_ADC_13 0x1 /* 13 bit ADC */ > +#define ISL28022_ADC_14 0x2 /* 14 bit ADC */ > +#define ISL28022_ADC_15 0x3 /* 15 bit ADC */ > +#define ISL28022_ADC_15_1 0x8 /* 15 bit ADC, 1 sample */ > +#define ISL28022_ADC_15_2 0x9 /* 15 bit ADC, 2 samples */ > +#define ISL28022_ADC_15_4 0xA /* 15 bit ADC, 4 samples */ > +#define ISL28022_ADC_15_8 0xB /* 15 bit ADC, 8 samples */ > +#define ISL28022_ADC_15_16 0xC /* 15 bit ADC, 16 samples */ > +#define ISL28022_ADC_15_32 0xD /* 15 bit ADC, 32 samples */ > +#define ISL28022_ADC_15_64 0xE /* 15 bit ADC, 64 samples */ > +#define ISL28022_ADC_15_128 0xF /* 15 bit ADC, 128 samples */ > + > +/* shunt voltage range */ > +#define ISL28022_PG_SHIFT 11 > +#define ISL28022_PG_MASK 0x1800 > + > +#define ISL28022_PG_40 0x0 /* +/-40 mV */ > +#define ISL28022_PG_80 0x1 /* +/-80 mV */ > +#define ISL28022_PG_160 0x2 /* +/-160 mV */ > +#define ISL28022_PG_320 0x3 /* +/-3200 mV */ > + > +/* bus voltage range */ > +#define ISL28022_BRNG_SHIFT 13 > +#define ISL28022_BRNG_MASK 0x6000 > + > +#define ISL28022_BRNG_16 0x0 /* 16 V */ > +#define ISL28022_BRNG_32 0x1 /* 32 V */ > +#define ISL28022_BRNG_60 0x3 /* 60 V */ > + > +/* reset */ > +#define ISL28022_RESET 0x8000 > + > +struct isl28022_data { > + struct i2c_client *client; > + struct regmap *regmap; > +#ifdef CONFIG_DEBUG_FS > + struct dentry *debugfs; > +#endif > + u32 shunt; > + u32 gain; > + u32 average; > + u16 config; > + u16 calib; > +}; > + > +static int isl28022_read(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long *val) > +{ > + struct isl28022_data *data = dev_get_drvdata(dev); > + unsigned int regval; > + int err; > + > + switch (type) { > + case hwmon_in: > + switch (attr) { > + case hwmon_in_input: > + err = regmap_read(data->regmap, > + ISL28022_REG_BUS, ®val); > + if (err < 0) > + return err; > + /* driver supports only 60V mode (BRNG 11) */ > + *val = (long)(((u16)regval) & 0xFFFC); > + break; > + default: > + return -EINVAL; > + } > + break; > + case hwmon_curr: > + switch (attr) { > + case hwmon_curr_input: > + err = regmap_read(data->regmap, > + ISL28022_REG_CURRENT, ®val); > + if (err < 0) > + return err; > + *val = ((long)regval * 1250L * (long)data->gain) / > + (long)data->shunt; > + break; > + default: > + return -EINVAL; > + } > + break; > + case hwmon_power: > + switch (attr) { > + case hwmon_power_input: > + err = regmap_read(data->regmap, > + ISL28022_REG_POWER, ®val); > + if (err < 0) > + return err; > + *val = ((51200000L * ((long)data->gain)) / > + (long)data->shunt) * (long)regval; > + break; > + default: > + return -EINVAL; > + } > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > +static umode_t isl28022_is_visible(const void *data, enum hwmon_sensor_types type, > + u32 attr, int channel) > +{ > + switch (type) { > + case hwmon_in: > + switch (attr) { > + case hwmon_in_input: > + return 0444; > + } > + break; > + case hwmon_curr: > + switch (attr) { > + case hwmon_curr_input: > + return 0444; > + } > + break; > + case hwmon_power: > + switch (attr) { > + case hwmon_power_input: > + return 0444; > + } > + break; > + default: > + break; > + } > + return 0; > +} Various default: missing. > + > +static const struct hwmon_channel_info *isl28022_info[] = { > + HWMON_CHANNEL_INFO(in, > + HWMON_I_INPUT), /* channel 0: bus voltage (mV) */ > + HWMON_CHANNEL_INFO(curr, > + HWMON_C_INPUT), /* channel 1: current (mA) */ > + HWMON_CHANNEL_INFO(power, > + HWMON_P_INPUT), /* channel 1: power (µW) */ > + NULL > +}; > + > +static const struct hwmon_ops isl28022_hwmon_ops = { > + .is_visible = isl28022_is_visible, > + .read = isl28022_read, > +}; > + > +static const struct hwmon_chip_info isl28022_chip_info = { > + .ops = &isl28022_hwmon_ops, > + .info = isl28022_info, > +}; > + > +static bool isl28022_is_writeable_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ISL28022_REG_CONFIG: > + case ISL28022_REG_CALIB: > + case ISL28022_REG_SHUNT_THR: > + case ISL28022_REG_BUS_THR: > + case ISL28022_REG_INT: > + case ISL28022_REG_AUX: > + return true; > + } > + > + return false; > +} > + > +static bool isl28022_is_volatile_reg(struct device *dev, unsigned int reg) > +{ > + switch (reg) { > + case ISL28022_REG_CONFIG: > + case ISL28022_REG_SHUNT: > + case ISL28022_REG_BUS: > + case ISL28022_REG_POWER: > + case ISL28022_REG_CURRENT: > + case ISL28022_REG_INT: > + case ISL28022_REG_AUX: > + return true; > + } > + return true; > +} > + > +static const struct regmap_config isl28022_regmap_config = { > + .reg_bits = 8, > + .val_bits = 16, > + .max_register = ISL28022_REG_MAX, > + .writeable_reg = isl28022_is_writeable_reg, > + .volatile_reg = isl28022_is_volatile_reg, > + .val_format_endian = REGMAP_ENDIAN_BIG, > + .cache_type = REGCACHE_RBTREE, > + .use_single_read = true, > + .use_single_write = true, > +}; > + > +static const struct i2c_device_id isl28022_ids[] = { > + { "isl28022", 0}, > + { /* LIST END */ } > +}; > +MODULE_DEVICE_TABLE(i2c, isl28022_ids); > + > +#ifdef CONFIG_DEBUG_FS > +static int shunt_voltage_show(struct seq_file *seqf, void *unused) > +{ > + struct isl28022_data *data = seqf->private; > + unsigned int regval; > + int err; > + > + err = regmap_read(data->regmap, > + ISL28022_REG_SHUNT, ®val); > + if (err) > + return err; > + > + /* print shunt voltage in micro volt */ > + seq_printf(seqf, "%d\n", regval * 10); > + > + return 0; > +} > +DEFINE_SHOW_ATTRIBUTE(shunt_voltage); > + > +static struct dentry *isl28022_debugfs_root; > + > +static void isl28022_debugfs_remove(void *res) > +{ > + debugfs_remove_recursive(res); > +} > + > +static int isl28022_debugfs_init(struct isl28022_data *data) > +{ This function should not return an error (see below). > + char name[16]; > + int err; > + struct dentry *entry; > + > + scnprintf(name, sizeof(name), "%d-%04hx", data->client->adapter->nr, data->client->addr); > + I am sure I mentioned this before. data->client is only used in this function. Pass it as argument instead of storing it in data->client. > + data->debugfs = debugfs_create_dir(name, isl28022_debugfs_root); Why store 'debugfs' in data ? It is not used outside this function. Actually, 'data' is only used to get data->client, and to (unnecessarily) store debugfs in it. Just pass 'client', add a local 'debugfs' variable instead, and drop both 'client' and 'debugfs' from struct isl28022_data. > + if (IS_ERR(data->debugfs)) > + return PTR_ERR(data->debugfs); > + > + err = devm_add_action_or_reset(&data->client->dev, isl28022_debugfs_remove, data->debugfs); > + if (err) > + return err; > + > + entry = debugfs_create_file("shunt_voltage", 0444, data->debugfs, data, > + &shunt_voltage_fops); > + if (IS_ERR(entry)) > + return PTR_ERR(entry); > + Error checking / handling of debugfs calls in this function should not be necessary. debugfs code handles it transparently. > + return 0; > +} > +#endif /* CONFIG_DEBUG_FS*/ > + > +/* > + * read property values and make consistency checks. > + * > + * following values for shunt range and resistor are allowed: > + * 40 mV -> gain 1, shunt min. 800 micro ohms > + * 80 mV -> gain 2, shunt min. 1600 micro ohms > + * 160 mV -> gain 4, shunt min. 3200 micro ohms > + * 320 mV -> gain 8, shunt min. 6400 micro ohms > + */ > +static int isl28022_read_properties(struct device *dev, struct isl28022_data *data) > +{ > + u32 val; > + int err; > + > + err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val); > + if (err == -ENODATA) > + val = 10000; > + else if (err < 0) > + return err; > + data->shunt = val; > + > + err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val); > + if (err == -ENODATA) > + val = 320000; > + else if (err < 0) > + return err; > + switch (val) { > + case 40000: > + data->gain = 1; > + if (data->shunt < 800) > + goto shunt_invalid; > + break; > + case 80000: > + data->gain = 2; > + if (data->shunt < 1600) > + goto shunt_invalid; > + break; > + case 160000: > + data->gain = 4; > + if (data->shunt < 3200) > + goto shunt_invalid; > + break; > + case 320000: > + data->gain = 8; > + if (data->shunt < 6400) > + goto shunt_invalid; > + break; > + default: > + dev_err(dev, "renesas,shunt-range-microvolt invalid value %d\n", val); > + return -EINVAL; > + } > + > + err = device_property_read_u32(dev, "renesas,average-samples", &val); > + if (err == -ENODATA) > + val = 1; -ENODATA means the property exists (as boolean) but contains no value. Is that really what you want here and above ? It contradicts the devicetree documentation which suggests defaults but doesn't say anything about a boolean property which should be interpreted as "use default". Should this check for -EINVAL instead ? > + else if (err < 0) > + return err; > + if ((val > 128) || (BIT(__ffs(val)) != val)) { Please no unnecessary ( ). Also, the return value of __ffs() is undefined if the parameter is 0. While BIT(some random number) is unlikely to be 0, it might well be if 'some random number' is >= 32. I don't think relying on this is a good idea. I would suggest checking for hweight32(val) != 1 instead. > + dev_err(dev, "renesas,average-samples invalid value %d\n", val); > + return -EINVAL; > + } > + data->average = val; > + > + return 0; > + > +shunt_invalid: > + dev_err(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt); > + return -EINVAL; > +} > + > +/* > + * write configuration and calibration registers > + * > + * The driver supports only shunt and bus continuous ADC mode at 15bit resolution > + * with averaging from 1 to 128 samples (pow of 2) on both channels. > + * Shunt voltage gain 1,2,4 or 8 is allowed. > + * The bus voltage range is 60V fixed. > + */ > +static int isl28022_config(struct isl28022_data *data) > +{ > + int err; > + > + data->config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) | > + (ISL28022_BRNG_60 << ISL28022_BRNG_SHIFT) | > + (__ffs(data->gain) << ISL28022_PG_SHIFT) | > + ((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_SADC_SHIFT) | > + ((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_BADC_SHIFT); > + > + data->calib = data->shunt ? 0x8000 / data->gain : 0; > + > + err = regmap_write(data->regmap, ISL28022_REG_CONFIG, data->config); > + if (err < 0) > + return err; > + > + err = regmap_write(data->regmap, ISL28022_REG_CALIB, data->calib); > + if (err < 0) > + return err; > + > + return 0; > +} > + > +static int isl28022_probe(struct i2c_client *client) > +{ > + struct device *dev = &client->dev; > + struct device *hwmon_dev; > + struct isl28022_data *data; > + int err; > + > + if (!i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_BYTE_DATA | > + I2C_FUNC_SMBUS_WORD_DATA)) > + return -ENODEV; > + > + data = devm_kzalloc(dev, sizeof(struct isl28022_data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + data->client = client; > + > + err = isl28022_read_properties(dev, data); > + if (err) > + return err; > + > + data->regmap = devm_regmap_init_i2c(client, &isl28022_regmap_config); > + if (IS_ERR(data->regmap)) > + return PTR_ERR(data->regmap); > + > + err = isl28022_config(data); > + if (err) > + return err; > + > +#ifdef CONFIG_DEBUG_FS > + err = isl28022_debugfs_init(data); > + if (err) > + return err; debugfs errors are not supposed to result in instantiation aborts. > +#endif > + > + hwmon_dev = devm_hwmon_device_register_with_info(dev, "isl28022_hwmon", > + data, &isl28022_chip_info, NULL); > + if (IS_ERR(hwmon_dev)) > + return PTR_ERR(hwmon_dev); > + > + dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name); > + return 0; > +} > + > +static const struct of_device_id __maybe_unused isl28022_of_match[] = { > + { .compatible = "renesas,isl28022"}, > + { /* LIST END */ } > +}; > +MODULE_DEVICE_TABLE(of, isl28022_of_match); > + > +static struct i2c_driver isl28022_driver = { > + .class = I2C_CLASS_HWMON, > + .driver = { > + .name = "isl28022", > + }, > + .probe_new = isl28022_probe, > + .id_table = isl28022_ids, > +}; > + > +#ifdef CONFIG_DEBUG_FS > +static int __init > +isl28022_init(void) > +{ > + int err; > + > + isl28022_debugfs_root = debugfs_create_dir("isl28022", NULL); > + err = i2c_add_driver(&isl28022_driver); > + if (!err) > + return 0; > + > + debugfs_remove_recursive(isl28022_debugfs_root); > + return err; > +} > + > +static void __exit > +isl28022_exit(void) > +{ > + i2c_del_driver(&isl28022_driver); > + debugfs_remove_recursive(isl28022_debugfs_root); > +} > + > +module_init(isl28022_init); > +module_exit(isl28022_exit); > +#else /* CONFIG_DEBUG_FS */ > +module_i2c_driver(isl28022_driver); > +#endif /* CONFIG_DEBUG_FS */ This set of ifdefs is unnecessary. debugfs functions are dummies if debugfs is not enabled. The above just makes the code more difficult to understand. In general, it is always better to avoid "#ifdef CONFIG_DEBUG_FS" to make sure that the code compiles with and without it. Please consider just always keeping that code. The compiler will drop most if not all of it if debugfs is not enabled. > + > +MODULE_AUTHOR("Carsten Spieß <mail@carsten-spiess.de>"); > +MODULE_DESCRIPTION("ISL28022 driver"); > +MODULE_LICENSE("GPL"); > -- > 2.34.1 >
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index d11924667f76..c9548fc5c40e 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -90,6 +90,7 @@ Hardware Monitoring Kernel Drivers ir35221 ir38064 ir36021 + isl28022 isl68137 it87 jc42 diff --git a/Documentation/hwmon/isl28022.rst b/Documentation/hwmon/isl28022.rst new file mode 100644 index 000000000000..8d4422a2dacd --- /dev/null +++ b/Documentation/hwmon/isl28022.rst @@ -0,0 +1,63 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver isl28022 +====================== + +Supported chips: + + * Renesas ISL28022 + + Prefix: 'isl28022' + + Addresses scanned: none + + Datasheet: Publicly available at the Renesas website + + https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf + +Author: + Carsten Spieß <mail@carsten-spiess.de> + +Description +----------- + +The ISL28022 is a power monitor with I2C interface. The device monitors +voltage, current via shunt resistor and calculated power. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +device explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. + +The shunt value in micro-ohms, shunt voltage range and averaging can be set +with device properties. +Please refer to the Documentation/devicetree/bindings/hwmon/isl,isl28022.yaml +for bindings if the device tree is used. + +The driver supports only shunt and bus continuous ADC mode at 15bit resolution. +Averaging can be set from 1 to 128 samples (power of 2) on both channels. +Shunt voltage range of 40, 80, 160 or 320mV is allowed +The bus voltage range is 60V fixed. + +Sysfs entries +------------- + +The following attributes are supported. All attributes are read-only. + +======================= ======================================================= +in0_input bus voltage (milli Volt) + +curr1_input current (milli Ampere) +power1_input power (micro Watt) +======================= ======================================================= + +Debugfs entries +--------------- + +The following attributes are supported. All attributes are read-only. + +======================= ======================================================= +shunt_voltage shunt voltage (micro Volt) +======================= ======================================================= diff --git a/MAINTAINERS b/MAINTAINERS index 7abb5710e1bb..b02e3b991676 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11065,6 +11065,13 @@ F: drivers/isdn/Makefile F: drivers/isdn/hardware/ F: drivers/isdn/mISDN/ +ISL28022 HARDWARE MONITORING DRIVER +M: Carsten Spieß <mail@carsten-spiess.de> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/isl28022.rst +F: drivers/hwmon/isl28022.c + ISOFS FILESYSTEM M: Jan Kara <jack@suse.cz> L: linux-fsdevel@vger.kernel.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 2913299c2c9e..3049c519e6ac 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -800,6 +800,17 @@ config SENSORS_CORETEMP sensor inside your CPU. Most of the family 6 CPUs are supported. Check Documentation/hwmon/coretemp.rst for details. +config SENSORS_ISL28022 + tristate "Renesas ISL28022" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for ISL28022 power monitor. + Check Documentation/hwmon/isl28022.rst for details. + + This driver can also be built as a module. If so, the module + will be called isl28022. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on !PPC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index ff6bfd109c72..4046fed7f48d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o obj-$(CONFIG_SENSORS_INA238) += ina238.o obj-$(CONFIG_SENSORS_INA3221) += ina3221.o obj-$(CONFIG_SENSORS_INTEL_M10_BMC_HWMON) += intel-m10-bmc-hwmon.o +obj-$(CONFIG_SENSORS_ISL28022) += isl28022.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_JC42) += jc42.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o diff --git a/drivers/hwmon/isl28022.c b/drivers/hwmon/isl28022.c new file mode 100644 index 000000000000..18b4481d5ff6 --- /dev/null +++ b/drivers/hwmon/isl28022.c @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * isl28022.c - driver for Renesas ISL28022 power monitor chip monitoring + * + * Copyright (c) 2023 Carsten Spieß <mail@carsten-spiess.de> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/debugfs.h> +#include <linux/err.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/util_macros.h> +#include <linux/regulator/consumer.h> + +/* ISL28022 registers */ +#define ISL28022_REG_CONFIG 0x00 +#define ISL28022_REG_SHUNT 0x01 +#define ISL28022_REG_BUS 0x02 +#define ISL28022_REG_POWER 0x03 +#define ISL28022_REG_CURRENT 0x04 +#define ISL28022_REG_CALIB 0x05 +#define ISL28022_REG_SHUNT_THR 0x06 +#define ISL28022_REG_BUS_THR 0x07 +#define ISL28022_REG_INT 0x08 +#define ISL28022_REG_AUX 0x09 +#define ISL28022_REG_MAX ISL28022_REG_AUX + +/* ISL28022 config flags */ +/* mode flags */ +#define ISL28022_MODE_SHIFT 0 +#define ISL28022_MODE_MASK 0x0007 + +#define ISL28022_MODE_PWR_DOWN 0x0 +#define ISL28022_MODE_TRG_S 0x1 +#define ISL28022_MODE_TRG_B 0x2 +#define ISL28022_MODE_TRG_SB 0x3 +#define ISL28022_MODE_ADC_OFF 0x4 +#define ISL28022_MODE_CONT_S 0x5 +#define ISL28022_MODE_CONT_B 0x6 +#define ISL28022_MODE_CONT_SB 0x7 + +/* shunt ADC settings */ +#define ISL28022_SADC_SHIFT 3 +#define ISL28022_SADC_MASK 0x0078 + +#define ISL28022_BADC_SHIFT 7 +#define ISL28022_BADC_MASK 0x0780 + +#define ISL28022_ADC_12 0x0 /* 12 bit ADC */ +#define ISL28022_ADC_13 0x1 /* 13 bit ADC */ +#define ISL28022_ADC_14 0x2 /* 14 bit ADC */ +#define ISL28022_ADC_15 0x3 /* 15 bit ADC */ +#define ISL28022_ADC_15_1 0x8 /* 15 bit ADC, 1 sample */ +#define ISL28022_ADC_15_2 0x9 /* 15 bit ADC, 2 samples */ +#define ISL28022_ADC_15_4 0xA /* 15 bit ADC, 4 samples */ +#define ISL28022_ADC_15_8 0xB /* 15 bit ADC, 8 samples */ +#define ISL28022_ADC_15_16 0xC /* 15 bit ADC, 16 samples */ +#define ISL28022_ADC_15_32 0xD /* 15 bit ADC, 32 samples */ +#define ISL28022_ADC_15_64 0xE /* 15 bit ADC, 64 samples */ +#define ISL28022_ADC_15_128 0xF /* 15 bit ADC, 128 samples */ + +/* shunt voltage range */ +#define ISL28022_PG_SHIFT 11 +#define ISL28022_PG_MASK 0x1800 + +#define ISL28022_PG_40 0x0 /* +/-40 mV */ +#define ISL28022_PG_80 0x1 /* +/-80 mV */ +#define ISL28022_PG_160 0x2 /* +/-160 mV */ +#define ISL28022_PG_320 0x3 /* +/-3200 mV */ + +/* bus voltage range */ +#define ISL28022_BRNG_SHIFT 13 +#define ISL28022_BRNG_MASK 0x6000 + +#define ISL28022_BRNG_16 0x0 /* 16 V */ +#define ISL28022_BRNG_32 0x1 /* 32 V */ +#define ISL28022_BRNG_60 0x3 /* 60 V */ + +/* reset */ +#define ISL28022_RESET 0x8000 + +struct isl28022_data { + struct i2c_client *client; + struct regmap *regmap; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs; +#endif + u32 shunt; + u32 gain; + u32 average; + u16 config; + u16 calib; +}; + +static int isl28022_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct isl28022_data *data = dev_get_drvdata(dev); + unsigned int regval; + int err; + + switch (type) { + case hwmon_in: + switch (attr) { + case hwmon_in_input: + err = regmap_read(data->regmap, + ISL28022_REG_BUS, ®val); + if (err < 0) + return err; + /* driver supports only 60V mode (BRNG 11) */ + *val = (long)(((u16)regval) & 0xFFFC); + break; + default: + return -EINVAL; + } + break; + case hwmon_curr: + switch (attr) { + case hwmon_curr_input: + err = regmap_read(data->regmap, + ISL28022_REG_CURRENT, ®val); + if (err < 0) + return err; + *val = ((long)regval * 1250L * (long)data->gain) / + (long)data->shunt; + break; + default: + return -EINVAL; + } + break; + case hwmon_power: + switch (attr) { + case hwmon_power_input: + err = regmap_read(data->regmap, + ISL28022_REG_POWER, ®val); + if (err < 0) + return err; + *val = ((51200000L * ((long)data->gain)) / + (long)data->shunt) * (long)regval; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static umode_t isl28022_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_in: + switch (attr) { + case hwmon_in_input: + return 0444; + } + break; + case hwmon_curr: + switch (attr) { + case hwmon_curr_input: + return 0444; + } + break; + case hwmon_power: + switch (attr) { + case hwmon_power_input: + return 0444; + } + break; + default: + break; + } + return 0; +} + +static const struct hwmon_channel_info *isl28022_info[] = { + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT), /* channel 0: bus voltage (mV) */ + HWMON_CHANNEL_INFO(curr, + HWMON_C_INPUT), /* channel 1: current (mA) */ + HWMON_CHANNEL_INFO(power, + HWMON_P_INPUT), /* channel 1: power (µW) */ + NULL +}; + +static const struct hwmon_ops isl28022_hwmon_ops = { + .is_visible = isl28022_is_visible, + .read = isl28022_read, +}; + +static const struct hwmon_chip_info isl28022_chip_info = { + .ops = &isl28022_hwmon_ops, + .info = isl28022_info, +}; + +static bool isl28022_is_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ISL28022_REG_CONFIG: + case ISL28022_REG_CALIB: + case ISL28022_REG_SHUNT_THR: + case ISL28022_REG_BUS_THR: + case ISL28022_REG_INT: + case ISL28022_REG_AUX: + return true; + } + + return false; +} + +static bool isl28022_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ISL28022_REG_CONFIG: + case ISL28022_REG_SHUNT: + case ISL28022_REG_BUS: + case ISL28022_REG_POWER: + case ISL28022_REG_CURRENT: + case ISL28022_REG_INT: + case ISL28022_REG_AUX: + return true; + } + return true; +} + +static const struct regmap_config isl28022_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ISL28022_REG_MAX, + .writeable_reg = isl28022_is_writeable_reg, + .volatile_reg = isl28022_is_volatile_reg, + .val_format_endian = REGMAP_ENDIAN_BIG, + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +static const struct i2c_device_id isl28022_ids[] = { + { "isl28022", 0}, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, isl28022_ids); + +#ifdef CONFIG_DEBUG_FS +static int shunt_voltage_show(struct seq_file *seqf, void *unused) +{ + struct isl28022_data *data = seqf->private; + unsigned int regval; + int err; + + err = regmap_read(data->regmap, + ISL28022_REG_SHUNT, ®val); + if (err) + return err; + + /* print shunt voltage in micro volt */ + seq_printf(seqf, "%d\n", regval * 10); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(shunt_voltage); + +static struct dentry *isl28022_debugfs_root; + +static void isl28022_debugfs_remove(void *res) +{ + debugfs_remove_recursive(res); +} + +static int isl28022_debugfs_init(struct isl28022_data *data) +{ + char name[16]; + int err; + struct dentry *entry; + + scnprintf(name, sizeof(name), "%d-%04hx", data->client->adapter->nr, data->client->addr); + + data->debugfs = debugfs_create_dir(name, isl28022_debugfs_root); + if (IS_ERR(data->debugfs)) + return PTR_ERR(data->debugfs); + + err = devm_add_action_or_reset(&data->client->dev, isl28022_debugfs_remove, data->debugfs); + if (err) + return err; + + entry = debugfs_create_file("shunt_voltage", 0444, data->debugfs, data, + &shunt_voltage_fops); + if (IS_ERR(entry)) + return PTR_ERR(entry); + + return 0; +} +#endif /* CONFIG_DEBUG_FS*/ + +/* + * read property values and make consistency checks. + * + * following values for shunt range and resistor are allowed: + * 40 mV -> gain 1, shunt min. 800 micro ohms + * 80 mV -> gain 2, shunt min. 1600 micro ohms + * 160 mV -> gain 4, shunt min. 3200 micro ohms + * 320 mV -> gain 8, shunt min. 6400 micro ohms + */ +static int isl28022_read_properties(struct device *dev, struct isl28022_data *data) +{ + u32 val; + int err; + + err = device_property_read_u32(dev, "shunt-resistor-micro-ohms", &val); + if (err == -ENODATA) + val = 10000; + else if (err < 0) + return err; + data->shunt = val; + + err = device_property_read_u32(dev, "renesas,shunt-range-microvolt", &val); + if (err == -ENODATA) + val = 320000; + else if (err < 0) + return err; + switch (val) { + case 40000: + data->gain = 1; + if (data->shunt < 800) + goto shunt_invalid; + break; + case 80000: + data->gain = 2; + if (data->shunt < 1600) + goto shunt_invalid; + break; + case 160000: + data->gain = 4; + if (data->shunt < 3200) + goto shunt_invalid; + break; + case 320000: + data->gain = 8; + if (data->shunt < 6400) + goto shunt_invalid; + break; + default: + dev_err(dev, "renesas,shunt-range-microvolt invalid value %d\n", val); + return -EINVAL; + } + + err = device_property_read_u32(dev, "renesas,average-samples", &val); + if (err == -ENODATA) + val = 1; + else if (err < 0) + return err; + if ((val > 128) || (BIT(__ffs(val)) != val)) { + dev_err(dev, "renesas,average-samples invalid value %d\n", val); + return -EINVAL; + } + data->average = val; + + return 0; + +shunt_invalid: + dev_err(dev, "renesas,shunt-resistor-microvolt invalid value %d\n", data->shunt); + return -EINVAL; +} + +/* + * write configuration and calibration registers + * + * The driver supports only shunt and bus continuous ADC mode at 15bit resolution + * with averaging from 1 to 128 samples (pow of 2) on both channels. + * Shunt voltage gain 1,2,4 or 8 is allowed. + * The bus voltage range is 60V fixed. + */ +static int isl28022_config(struct isl28022_data *data) +{ + int err; + + data->config = (ISL28022_MODE_CONT_SB << ISL28022_MODE_SHIFT) | + (ISL28022_BRNG_60 << ISL28022_BRNG_SHIFT) | + (__ffs(data->gain) << ISL28022_PG_SHIFT) | + ((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_SADC_SHIFT) | + ((ISL28022_ADC_15_1 + __ffs(data->average)) << ISL28022_BADC_SHIFT); + + data->calib = data->shunt ? 0x8000 / data->gain : 0; + + err = regmap_write(data->regmap, ISL28022_REG_CONFIG, data->config); + if (err < 0) + return err; + + err = regmap_write(data->regmap, ISL28022_REG_CALIB, data->calib); + if (err < 0) + return err; + + return 0; +} + +static int isl28022_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct device *hwmon_dev; + struct isl28022_data *data; + int err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(struct isl28022_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + + err = isl28022_read_properties(dev, data); + if (err) + return err; + + data->regmap = devm_regmap_init_i2c(client, &isl28022_regmap_config); + if (IS_ERR(data->regmap)) + return PTR_ERR(data->regmap); + + err = isl28022_config(data); + if (err) + return err; + +#ifdef CONFIG_DEBUG_FS + err = isl28022_debugfs_init(data); + if (err) + return err; +#endif + + hwmon_dev = devm_hwmon_device_register_with_info(dev, "isl28022_hwmon", + data, &isl28022_chip_info, NULL); + if (IS_ERR(hwmon_dev)) + return PTR_ERR(hwmon_dev); + + dev_info(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), client->name); + return 0; +} + +static const struct of_device_id __maybe_unused isl28022_of_match[] = { + { .compatible = "renesas,isl28022"}, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(of, isl28022_of_match); + +static struct i2c_driver isl28022_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "isl28022", + }, + .probe_new = isl28022_probe, + .id_table = isl28022_ids, +}; + +#ifdef CONFIG_DEBUG_FS +static int __init +isl28022_init(void) +{ + int err; + + isl28022_debugfs_root = debugfs_create_dir("isl28022", NULL); + err = i2c_add_driver(&isl28022_driver); + if (!err) + return 0; + + debugfs_remove_recursive(isl28022_debugfs_root); + return err; +} + +static void __exit +isl28022_exit(void) +{ + i2c_del_driver(&isl28022_driver); + debugfs_remove_recursive(isl28022_debugfs_root); +} + +module_init(isl28022_init); +module_exit(isl28022_exit); +#else /* CONFIG_DEBUG_FS */ +module_i2c_driver(isl28022_driver); +#endif /* CONFIG_DEBUG_FS */ + +MODULE_AUTHOR("Carsten Spieß <mail@carsten-spiess.de>"); +MODULE_DESCRIPTION("ISL28022 driver"); +MODULE_LICENSE("GPL");
Driver for Renesas ISL28022 power monitor with I2C interface. The device monitors voltage, current via shunt resistor and calculated power. Signed-off-by: Carsten Spieß <mail@carsten-spiess.de> --- v4: - no changes v3: - changelog added v2/v3: - hwmon input shunt voltage removed - debugfs for shunt voltage read access added - missing error handling added - shunt resistor minimum and default value added - properties reworked - device_property_* instead of_property fixed - possible overflows fixed - MAINTAINERS order fixed - documentation updated --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/isl28022.rst | 63 ++++ MAINTAINERS | 7 + drivers/hwmon/Kconfig | 11 + drivers/hwmon/Makefile | 1 + drivers/hwmon/isl28022.c | 496 +++++++++++++++++++++++++++++++ 6 files changed, 579 insertions(+) create mode 100644 Documentation/hwmon/isl28022.rst create mode 100644 drivers/hwmon/isl28022.c