diff mbox series

[v4,2/3] hwmon (xdpe12284): Add support for xdpe11280

Message ID fa6a4b636a05ecb337d132824efca2545188a2a2.1646214248.git.sylv@sylv.io (mailing list archive)
State Accepted
Headers show
Series Support XDPE112 | expand

Commit Message

Marcello Sylvester Bauer March 2, 2022, 9:49 a.m. UTC 
Add support for another Infineon Multi-phase controller chip. The
xdpe11280 uses linear instead of vid data format for VOUT. Detect
VOUT_MODE format during identification and skip the xdpe122 related
adaptions in case it is linear.

Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
---
 Documentation/hwmon/xdpe12284.rst | 12 ++++++++----
 drivers/hwmon/pmbus/xdpe12284.c   | 21 ++++++++++++++++++---
 2 files changed, 26 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/hwmon/xdpe12284.rst b/Documentation/hwmon/xdpe12284.rst
index 67d1f87808e5..a224dc74ad35 100644
--- a/Documentation/hwmon/xdpe12284.rst
+++ b/Documentation/hwmon/xdpe12284.rst
@@ -5,6 +5,10 @@  Kernel driver xdpe122
 
 Supported chips:
 
+  * Infineon XDPE11280
+
+    Prefix: 'xdpe11280'
+
   * Infineon XDPE12254
 
     Prefix: 'xdpe12254'
@@ -20,10 +24,10 @@  Authors:
 Description
 -----------
 
-This driver implements support for Infineon Multi-phase XDPE122 family
-dual loop voltage regulators.
-The family includes XDPE12284 and XDPE12254 devices.
-The devices from this family complaint with:
+This driver implements support for Infineon Multi-phase XDPE112 and XDPE122
+family dual loop voltage regulators.
+These families include XDPE11280, XDPE12284 and XDPE12254 devices.
+The devices from this family compliant with:
 
 - Intel VR13 and VR13HC rev 1.3, IMVP8 rev 1.2 and IMPVP9 rev 1.3 DC-DC
   converter specification.
diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
index b07da06a40c9..b979c88d2e87 100644
--- a/drivers/hwmon/pmbus/xdpe12284.c
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -76,7 +76,22 @@  static int xdpe122_identify(struct i2c_client *client,
 			    struct pmbus_driver_info *info)
 {
 	u8 vout_params;
-	int i, ret;
+	int i, ret, vout_mode;
+
+	vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+	if (vout_mode >= 0 && vout_mode != 0xff) {
+		switch (vout_mode >> 5) {
+		case 0:
+			info->format[PSC_VOLTAGE_OUT] = linear;
+			return 0;
+		case 1:
+			info->format[PSC_VOLTAGE_OUT] = vid;
+			info->read_word_data = xdpe122_read_word_data;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
 
 	for (i = 0; i < XDPE122_PAGE_NUM; i++) {
 		/* Read the register with VOUT scaling value.*/
@@ -110,7 +125,6 @@  static int xdpe122_identify(struct i2c_client *client,
 static struct pmbus_driver_info xdpe122_info = {
 	.pages = XDPE122_PAGE_NUM,
 	.format[PSC_VOLTAGE_IN] = linear,
-	.format[PSC_VOLTAGE_OUT] = vid,
 	.format[PSC_TEMPERATURE] = linear,
 	.format[PSC_CURRENT_IN] = linear,
 	.format[PSC_CURRENT_OUT] = linear,
@@ -124,7 +138,6 @@  static struct pmbus_driver_info xdpe122_info = {
 		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
 		PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
 	.identify = xdpe122_identify,
-	.read_word_data = xdpe122_read_word_data,
 };
 
 static int xdpe122_probe(struct i2c_client *client)
@@ -140,6 +153,7 @@  static int xdpe122_probe(struct i2c_client *client)
 }
 
 static const struct i2c_device_id xdpe122_id[] = {
+	{"xdpe11280", 0},
 	{"xdpe12254", 0},
 	{"xdpe12284", 0},
 	{}
@@ -148,6 +162,7 @@  static const struct i2c_device_id xdpe122_id[] = {
 MODULE_DEVICE_TABLE(i2c, xdpe122_id);
 
 static const struct of_device_id __maybe_unused xdpe122_of_match[] = {
+	{.compatible = "infineon,xdpe11280"},
 	{.compatible = "infineon,xdpe12254"},
 	{.compatible = "infineon,xdpe12284"},
 	{}