@@ -50,6 +50,26 @@ int i3c_device_do_priv_xfers(struct i3c_device *dev,
}
EXPORT_SYMBOL_GPL(i3c_device_do_priv_xfers);
+/**
+ * i3c_device_do_setdasa() - do I3C dynamic address assignement with
+ * static address
+ *
+ * @dev: device with which the DAA should be done
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+int i3c_device_do_setdasa(struct i3c_device *dev)
+{
+ int ret;
+
+ i3c_bus_normaluse_lock(dev->bus);
+ ret = i3c_dev_setdasa_locked(dev->desc);
+ i3c_bus_normaluse_unlock(dev->bus);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(i3c_device_do_setdasa);
+
/**
* i3c_device_get_info() - get I3C device information
*
@@ -15,6 +15,7 @@ extern struct bus_type i3c_bus_type;
void i3c_bus_normaluse_lock(struct i3c_bus *bus);
void i3c_bus_normaluse_unlock(struct i3c_bus *bus);
+int i3c_dev_setdasa_locked(struct i3c_dev_desc *dev);
int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev,
struct i3c_priv_xfer *xfers,
int nxfers);
@@ -2708,6 +2708,25 @@ int i3c_master_unregister(struct i3c_master_controller *master)
}
EXPORT_SYMBOL_GPL(i3c_master_unregister);
+int i3c_dev_setdasa_locked(struct i3c_dev_desc *dev)
+{
+ struct i3c_master_controller *master;
+
+ if (!dev)
+ return -ENOENT;
+
+ master = i3c_dev_get_master(dev);
+ if (!master)
+ return -EINVAL;
+
+ if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
+ !dev->boardinfo->static_addr)
+ return -EINVAL;
+
+ return i3c_master_setdasa_locked(master, dev->info.static_addr,
+ dev->boardinfo->init_dyn_addr);
+}
+
int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev,
struct i3c_priv_xfer *xfers,
int nxfers)
@@ -293,6 +293,8 @@ int i3c_device_do_priv_xfers(struct i3c_device *dev,
struct i3c_priv_xfer *xfers,
int nxfers);
+int i3c_device_do_setdasa(struct i3c_device *dev);
+
void i3c_device_get_info(struct i3c_device *dev, struct i3c_device_info *info);
struct i3c_ibi_payload {
Because not all I3C drivers have the hot-join feature ready, and especially not all I3C devices support hot-join feature, exporting SETDASA method could be useful. With this function, the I3C controller could perform a DAA to I3C devices when users decide to turn these I3C devices off and on again during run-time. Tested: This change has been tested with turnning off an I3C device and turning on it again during run-time. The device driver calls SETDASA method to perform DAA to the device. And communication between I3C controller and device is set up again correctly. Signed-off-by: Jack Chen <zenghuchen@google.com> --- drivers/i3c/device.c | 20 ++++++++++++++++++++ drivers/i3c/internals.h | 1 + drivers/i3c/master.c | 19 +++++++++++++++++++ include/linux/i3c/device.h | 2 ++ 4 files changed, 42 insertions(+)