diff mbox series

[2/2] arm64: dts: freescale: imx93: add i3c1 and i3c2

Message ID 20231016152450.2850498-2-Frank.Li@nxp.com (mailing list archive)
State Rejected
Headers show
Series [1/2] dt-bindings: i3c: Fix silvaco,i3c-master compatible string | expand

Commit Message

Frank Li Oct. 16, 2023, 3:24 p.m. UTC
Add I3C1 and I3C2.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Rob Herring (Arm) Oct. 17, 2023, 8:14 p.m. UTC | #1
On Mon, Oct 16, 2023 at 11:24:50AM -0400, Frank Li wrote:
> Add I3C1 and I3C2.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx93.dtsi | 26 ++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 6f85a05ee7e1..4d9ed0b32853 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -242,6 +242,19 @@ tpm2: pwm@44320000 {
>  				status = "disabled";
>  			};
>  
> +			i3c1: i3c-master@44330000 {
> +				compatible = "silvaco,i3c-master";

The real problem here is not whether we have "v1" or not, but you need 
an SoC specific compatible. Unless there's a public spec where we can 
know exactly how many resets, clocks, interrupts, etc.

Rob
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 6f85a05ee7e1..4d9ed0b32853 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -242,6 +242,19 @@  tpm2: pwm@44320000 {
 				status = "disabled";
 			};
 
+			i3c1: i3c-master@44330000 {
+				compatible = "silvaco,i3c-master";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c1: i2c@44340000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x44340000 0x10000>;
@@ -496,6 +509,19 @@  tpm6: pwm@42510000 {
 				status = "disabled";
 			};
 
+			i3c2: i3c-master@42520000 {
+				compatible = "silvaco,i3c-master";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
 			lpi2c3: i2c@42530000 {
 				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
 				reg = <0x42530000 0x10000>;