diff mbox series

[v4,5/6] i3c: mipi-i3c-hci: Add a quirk to set timing parameters

Message ID 20240821133554.391937-6-Shyam-sundar.S-k@amd.com (mailing list archive)
State Superseded
Headers show
Series Introduce initial AMD I3C HCI driver support | expand

Commit Message

Shyam Sundar S K Aug. 21, 2024, 1:35 p.m. UTC 
The AMD HCI controller is currently unstable at 12.5 MHz. To address this,
a quirk is added to configure the clock rate to 9 MHz as a workaround,
with proportional adjustments to the Open-Drain (OD) and Push-Pull (PP)
values.

Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
 drivers/i3c/master/mipi-i3c-hci/Makefile     |  3 +-
 drivers/i3c/master/mipi-i3c-hci/core.c       |  6 +++-
 drivers/i3c/master/mipi-i3c-hci/hci.h        |  2 ++
 drivers/i3c/master/mipi-i3c-hci/hci_quirks.c | 33 ++++++++++++++++++++
 4 files changed, 42 insertions(+), 2 deletions(-)
 create mode 100644 drivers/i3c/master/mipi-i3c-hci/hci_quirks.c

Comments

Jarkko Nikula Aug. 23, 2024, 10:11 a.m. UTC | #1 
On 8/21/24 4:35 PM, Shyam Sundar S K wrote:
> The AMD HCI controller is currently unstable at 12.5 MHz. To address this,
> a quirk is added to configure the clock rate to 9 MHz as a workaround,
> with proportional adjustments to the Open-Drain (OD) and Push-Pull (PP)
> values.
> 
> Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
> Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
>   drivers/i3c/master/mipi-i3c-hci/Makefile     |  3 +-
>   drivers/i3c/master/mipi-i3c-hci/core.c       |  6 +++-
>   drivers/i3c/master/mipi-i3c-hci/hci.h        |  2 ++
>   drivers/i3c/master/mipi-i3c-hci/hci_quirks.c | 33 ++++++++++++++++++++
>   4 files changed, 42 insertions(+), 2 deletions(-)
>   create mode 100644 drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
> 
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
diff mbox series

Patch

diff --git a/drivers/i3c/master/mipi-i3c-hci/Makefile b/drivers/i3c/master/mipi-i3c-hci/Makefile
index a658e7b8262c..1f8cd5c48fde 100644
--- a/drivers/i3c/master/mipi-i3c-hci/Makefile
+++ b/drivers/i3c/master/mipi-i3c-hci/Makefile
@@ -3,4 +3,5 @@ 
 obj-$(CONFIG_MIPI_I3C_HCI)		+= mipi-i3c-hci.o
 mipi-i3c-hci-y				:= core.o ext_caps.o pio.o dma.o \
 					   cmd_v1.o cmd_v2.o \
-					   dat_v1.o dct_v1.o
+					   dat_v1.o dct_v1.o \
+					   hci_quirks.o
diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index c0f3c0ce9f6a..fe49765fc2da 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -784,6 +784,10 @@  static int i3c_hci_init(struct i3c_hci *hci)
 		return ret;
 	}
 
+	/* Configure OD and PP timings for AMD platforms */
+	if (hci->quirks & HCI_QUIRK_OD_PP_TIMING)
+		amd_set_od_pp_timing(hci);
+
 	return 0;
 }
 
@@ -837,7 +841,7 @@  static const __maybe_unused struct of_device_id i3c_hci_of_match[] = {
 MODULE_DEVICE_TABLE(of, i3c_hci_of_match);
 
 static const struct acpi_device_id i3c_hci_acpi_match[] = {
-	{"AMDI5017", HCI_QUIRK_PIO_MODE},
+	{"AMDI5017", HCI_QUIRK_PIO_MODE | HCI_QUIRK_OD_PP_TIMING},
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, i3c_hci_acpi_match);
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index 76658789b018..361e1366fe38 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -141,11 +141,13 @@  struct i3c_hci_dev_data {
 /* list of quirks */
 #define HCI_QUIRK_RAW_CCC	BIT(1)	/* CCC framing must be explicit */
 #define HCI_QUIRK_PIO_MODE	BIT(2)  /* Set PIO mode for AMD platforms */
+#define HCI_QUIRK_OD_PP_TIMING		BIT(3)  /* Set OD and PP timings for AMD platforms */
 
 
 /* global functions */
 void mipi_i3c_hci_resume(struct i3c_hci *hci);
 void mipi_i3c_hci_pio_reset(struct i3c_hci *hci);
 void mipi_i3c_hci_dct_index_reset(struct i3c_hci *hci);
+void amd_set_od_pp_timing(struct i3c_hci *hci);
 
 #endif
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c b/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
new file mode 100644
index 000000000000..e8ea4d101f66
--- /dev/null
+++ b/drivers/i3c/master/mipi-i3c-hci/hci_quirks.c
@@ -0,0 +1,33 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * I3C HCI Quirks
+ *
+ * Copyright 2024 Advanced Micro Devices, Inc.
+ *
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ *	    Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
+ */
+
+#include <linux/i3c/master.h>
+#include "hci.h"
+
+/* Timing registers */
+#define HCI_SCL_I3C_OD_TIMING          0x214
+#define HCI_SCL_I3C_PP_TIMING          0x218
+#define HCI_SDA_HOLD_SWITCH_DLY_TIMING 0x230
+
+/* Timing values to configure 9MHz frequency */
+#define AMD_SCL_I3C_OD_TIMING          0x00cf00cf
+#define AMD_SCL_I3C_PP_TIMING          0x00160016
+
+void amd_set_od_pp_timing(struct i3c_hci *hci)
+{
+	u32 data;
+
+	reg_write(HCI_SCL_I3C_OD_TIMING, AMD_SCL_I3C_OD_TIMING);
+	reg_write(HCI_SCL_I3C_PP_TIMING, AMD_SCL_I3C_PP_TIMING);
+	data = reg_read(HCI_SDA_HOLD_SWITCH_DLY_TIMING);
+	/* Configure maximum TX hold time */
+	data |= W0_MASK(18, 16);
+	reg_write(HCI_SDA_HOLD_SWITCH_DLY_TIMING, data);
+}