diff mbox series

[v6,2/6] i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1

Message ID 20240829091713.736217-3-Shyam-sundar.S-k@amd.com (mailing list archive)
State Accepted
Headers show
Series Introduce initial AMD I3C HCI driver support | expand

Commit Message

Shyam Sundar S K Aug. 29, 2024, 9:17 a.m. UTC 
The HC_CONTROL_PIO_MODE bit was introduced in the HC_CONTROL register
starting from version 1.1. Therefore, checking the HC_CONTROL_PIO_MODE bit
on hardware that adheres to older specification revisions (i.e., versions
earlier than 1.1) is incorrect. To address this, add an additional check
to read the HCI version before attempting to read the HC_CONTROL_PIO_MODE
status.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
 drivers/i3c/master/mipi-i3c-hci/core.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

Comments

Jarkko Nikula Sept. 2, 2024, 6:15 a.m. UTC | #1 
On 8/29/24 12:17 PM, Shyam Sundar S K wrote:
> The HC_CONTROL_PIO_MODE bit was introduced in the HC_CONTROL register
> starting from version 1.1. Therefore, checking the HC_CONTROL_PIO_MODE bit
> on hardware that adheres to older specification revisions (i.e., versions
> earlier than 1.1) is incorrect. To address this, add an additional check
> to read the HCI version before attempting to read the HC_CONTROL_PIO_MODE
> status.
> 
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
>   drivers/i3c/master/mipi-i3c-hci/core.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
> 
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
diff mbox series

Patch

diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index 07de1cecfa30..a6781cfeebb8 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -630,8 +630,8 @@  static irqreturn_t i3c_hci_irq_handler(int irq, void *dev_id)
 
 static int i3c_hci_init(struct i3c_hci *hci)
 {
+	bool size_in_dwords, mode_selector;
 	u32 regval, offset;
-	bool size_in_dwords;
 	int ret;
 
 	/* Validate HCI hardware version */
@@ -753,10 +753,13 @@  static int i3c_hci_init(struct i3c_hci *hci)
 		return -EINVAL;
 	}
 
+	mode_selector = hci->version_major > 1 ||
+				(hci->version_major == 1 && hci->version_minor > 0);
+
 	/* Try activating DMA operations first */
 	if (hci->RHS_regs) {
 		reg_clear(HC_CONTROL, HC_CONTROL_PIO_MODE);
-		if (reg_read(HC_CONTROL) & HC_CONTROL_PIO_MODE) {
+		if (mode_selector && (reg_read(HC_CONTROL) & HC_CONTROL_PIO_MODE)) {
 			dev_err(&hci->master.dev, "PIO mode is stuck\n");
 			ret = -EIO;
 		} else {
@@ -768,7 +771,7 @@  static int i3c_hci_init(struct i3c_hci *hci)
 	/* If no DMA, try PIO */
 	if (!hci->io && hci->PIO_regs) {
 		reg_set(HC_CONTROL, HC_CONTROL_PIO_MODE);
-		if (!(reg_read(HC_CONTROL) & HC_CONTROL_PIO_MODE)) {
+		if (mode_selector && !(reg_read(HC_CONTROL) & HC_CONTROL_PIO_MODE)) {
 			dev_err(&hci->master.dev, "DMA mode is stuck\n");
 			ret = -EIO;
 		} else {