diff mbox series

[v2,3/3] i3c: ast2600: Add AST2600 platform-specific driver

Message ID d4424535a88f529ca8efa67246ee25a5d810c6c1.1680160851.git.jk@codeconstruct.com.au (mailing list archive)
State Superseded
Headers show
Series i3c dw,ast2600: Add a driver for the AST2600 i3c controller | expand

Commit Message

Jeremy Kerr March 30, 2023, 7:22 a.m. UTC 
Now that we have platform-specific infrastructure for the dw i3c driver,
add platform support for the ASPEED AST2600 SoC.

The AST2600 has a small set of "i3c global" registers, providing
platform-level i3c configuration outside of the i3c core.

For the ast2600, we need a couple of extra setup operations:

 - on probe: find the i3c global register set and parse the SDA pullup
   resistor values

 - on init: set the pullups accordingly, and set the i3c instance IDs

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>

---
v2:
 - use new dw platform infrastructure
---
 MAINTAINERS                             |   6 +
 drivers/i3c/master/Kconfig              |  14 ++
 drivers/i3c/master/Makefile             |   1 +
 drivers/i3c/master/ast2600-i3c-master.c | 169 ++++++++++++++++++++++++
 4 files changed, 190 insertions(+)
 create mode 100644 drivers/i3c/master/ast2600-i3c-master.c

Comments

Ben Dooks March 30, 2023, 7:22 p.m. UTC | #1 
On 30/03/2023 08:22, Jeremy Kerr wrote:
> Now that we have platform-specific infrastructure for the dw i3c driver,
> add platform support for the ASPEED AST2600 SoC.
> 
> The AST2600 has a small set of "i3c global" registers, providing
> platform-level i3c configuration outside of the i3c core.
> 
> For the ast2600, we need a couple of extra setup operations:
> 
>   - on probe: find the i3c global register set and parse the SDA pullup
>     resistor values
> 
>   - on init: set the pullups accordingly, and set the i3c instance IDs
> 
> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
> 
> ---
> v2:
>   - use new dw platform infrastructure
> ---
>   MAINTAINERS                             |   6 +
>   drivers/i3c/master/Kconfig              |  14 ++
>   drivers/i3c/master/Makefile             |   1 +
>   drivers/i3c/master/ast2600-i3c-master.c | 169 ++++++++++++++++++++++++
>   4 files changed, 190 insertions(+)
>   create mode 100644 drivers/i3c/master/ast2600-i3c-master.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bd8ebc25afcf..ecadd5ccf771 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9714,6 +9714,12 @@ S:	Orphan
>   F:	Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
>   F:	drivers/i3c/master/dw*
>   
> +I3C DRIVER FOR ASPEED AST2600
> +M:	Jeremy Kerr <jk@codeconstruct.com.au>
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
> +F:	drivers/i3c/master/ast2600-i3c-master.c
> +
>   I3C SUBSYSTEM
>   M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
>   L:	linux-i3c@lists.infradead.org (moderated for non-subscribers)
> diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
> index 3b8f95916f46..90dee3ec5520 100644
> --- a/drivers/i3c/master/Kconfig
> +++ b/drivers/i3c/master/Kconfig
> @@ -22,6 +22,20 @@ config DW_I3C_MASTER
>   	  This driver can also be built as a module.  If so, the module
>   	  will be called dw-i3c-master.
>   
> +config AST2600_I3C_MASTER
> +	tristate "ASPEED AST2600 I3C master driver"
> +	depends on DW_I3C_MASTER
> +	depends on ARCH_ASPEED || COMPILE_TEST
> +	select MFD_SYSCON
> +	help
> +	  Support for ASPEED AST2600 I3C Controller.
> +
> +	  This hardware is an instance of the DW I3C controller; this
> +	  driver adds platform- specific support for AST2600 hardware.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called ast2600-i3c-master.
> +
>   config SVC_I3C_MASTER
>   	tristate "Silvaco I3C Dual-Role Master driver"
>   	depends on I3C
> diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
> index b3fee0f690b2..3e97960160bc 100644
> --- a/drivers/i3c/master/Makefile
> +++ b/drivers/i3c/master/Makefile
> @@ -1,5 +1,6 @@
>   # SPDX-License-Identifier: GPL-2.0-only
>   obj-$(CONFIG_CDNS_I3C_MASTER)		+= i3c-master-cdns.o
>   obj-$(CONFIG_DW_I3C_MASTER)		+= dw-i3c-master.o
> +obj-$(CONFIG_AST2600_I3C_MASTER)	+= ast2600-i3c-master.o
>   obj-$(CONFIG_SVC_I3C_MASTER)		+= svc-i3c-master.o
>   obj-$(CONFIG_MIPI_I3C_HCI)		+= mipi-i3c-hci/
> diff --git a/drivers/i3c/master/ast2600-i3c-master.c b/drivers/i3c/master/ast2600-i3c-master.c
> new file mode 100644
> index 000000000000..d3d7b7d19f22
> --- /dev/null
> +++ b/drivers/i3c/master/ast2600-i3c-master.c
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2023 Code Construct
> + *
> + * Author: Jeremy Kerr <jk@codeconstruct.com.au>
> + */
> +
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#include "dw-i3c-master.h"
> +
> +/* AST2600-specific global register set */
> +#define AST2600_I3CG_REG0(idx)	(((idx) * 4 * 4) + 0x10)
> +#define AST2600_I3CG_REG1(idx)	(((idx) * 4 * 4) + 0x14)
> +
> +#define AST2600_I3CG_REG0_SDA_PULLUP_EN_MASK	GENMASK(29, 28)
> +#define AST2600_I3CG_REG0_SDA_PULLUP_EN_2K	(0x0 << 28)
> +#define AST2600_I3CG_REG0_SDA_PULLUP_EN_750	(0x2 << 28)
> +
> +#define AST2600_I3CG_REG1_I2C_MODE		BIT(0)
> +#define AST2600_I3CG_REG1_TEST_MODE		BIT(1)
> +#define AST2600_I3CG_REG1_ACT_MODE_MASK		GENMASK(3, 2)
> +#define AST2600_I3CG_REG1_ACT_MODE(x)		(((x) << 2) & AST2600_I3CG_REG1_ACT_MODE_MASK)
> +#define AST2600_I3CG_REG1_PENDING_INT_MASK	GENMASK(7, 4)
> +#define AST2600_I3CG_REG1_PENDING_INT(x)	(((x) << 4) & AST2600_I3CG_REG1_PENDING_INT_MASK)
> +#define AST2600_I3CG_REG1_SA_MASK		GENMASK(14, 8)
> +#define AST2600_I3CG_REG1_SA(x)			(((x) << 8) & AST2600_I3CG_REG1_SA_MASK)
> +#define AST2600_I3CG_REG1_SA_EN			BIT(15)
> +#define AST2600_I3CG_REG1_INST_ID_MASK		GENMASK(19, 16)
> +#define AST2600_I3CG_REG1_INST_ID(x)		(((x) << 16) & AST2600_I3CG_REG1_INST_ID_MASK)
> +
> +#define AST2600_DEFAULT_SDA_PULLUP_OHMS		2000
> +
> +struct ast2600_i3c_platform_data {
> +	struct regmap *global_regs;
> +	unsigned int global_idx;
> +	unsigned int sda_pullup;
> +};
> +
> +static int ast2600_i3c_pullup_to_reg(unsigned int ohms, u32 *regp)
> +{
> +	u32 reg;
> +
> +	switch (ohms) {
> +	case 2000:
> +		reg = AST2600_I3CG_REG0_SDA_PULLUP_EN_2K;
> +		break;
> +	case 750:
> +		reg = AST2600_I3CG_REG0_SDA_PULLUP_EN_750;
> +		break;
> +	case 545:
> +		reg = AST2600_I3CG_REG0_SDA_PULLUP_EN_2K |
> +			AST2600_I3CG_REG0_SDA_PULLUP_EN_750;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	if (regp)
> +		*regp = reg;
> +
> +	return 0;
> +}
> +
> +static int ast2600_i3c_init(struct dw_i3c_master *master)
> +{
> +	struct ast2600_i3c_platform_data *pdata = master->platform_data;
> +	u32 reg = 0;
> +	int rc;
> +
> +	/* reg0: set SDA pullup values */
> +	rc = ast2600_i3c_pullup_to_reg(pdata->sda_pullup, &reg);
> +	if (rc)
> +		return rc;
> +
> +	rc = regmap_write(pdata->global_regs,
> +			  AST2600_I3CG_REG0(pdata->global_idx), reg);
> +	if (rc)
> +		return rc;
> +
> +	/* reg1: set up the instance id, but leave everything else disabled,
> +	 * as it's all for client mode
> +	 */
> +	reg = AST2600_I3CG_REG1_INST_ID(pdata->global_idx);
> +	rc = regmap_write(pdata->global_regs,
> +			  AST2600_I3CG_REG1(pdata->global_idx), reg);
> +
> +	return rc;
> +}
> +
> +const struct dw_i3c_platform_ops ast2600_i3c_ops = {
> +	.init = ast2600_i3c_init,
> +};
> +
> +static int ast2600_i3c_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct ast2600_i3c_platform_data *pdata;
> +	struct of_phandle_args gspec;
> +	struct dw_i3c_master *dw_i3c;
> +	int rc;
> +
> +	dw_i3c = devm_kzalloc(&pdev->dev, sizeof(*dw_i3c) + sizeof(*pdata),
> +			      GFP_KERNEL);
> +	if (!dw_i3c)
> +		return -ENOMEM;


How about wrapping the dw_i3c_master struct in an as2600_master struct
and then you can use container of, and simply do sizeof(struct 
ast2600_master) ?

Also removes the need below to set pdata at-all

> +	pdata = (void *)(dw_i3c + 1);
> +
> +	rc = of_parse_phandle_with_fixed_args(np, "aspeed,global-regs", 1, 0,
> +					      &gspec);
> +	if (rc)
> +		return -ENODEV;
> +
> +	pdata->global_regs = syscon_node_to_regmap(gspec.np);
> +	of_node_put(gspec.np);
> +
> +	if (IS_ERR(pdata->global_regs))
> +		return PTR_ERR(pdata->global_regs);
> +
> +	pdata->global_idx = gspec.args[0];
> +
> +	rc = of_property_read_u32(np, "sda-pullup-ohms", &pdata->sda_pullup);
> +	if (rc)
> +		pdata->sda_pullup = AST2600_DEFAULT_SDA_PULLUP_OHMS;
> +
> +	rc = ast2600_i3c_pullup_to_reg(pdata->sda_pullup, NULL);
> +	if (rc)
> +		dev_err(&dw_i3c->base.dev, "invalid sda-pullup value %d\n",
> +			pdata->sda_pullup);
> +
> +	dw_i3c->platform_ops = &ast2600_i3c_ops;
> +	dw_i3c->platform_data = pdata;
> +	rc = dw_i3c_common_probe(dw_i3c, pdev);
> +
> +	return rc;
> +}
> +
> +static int ast2600_i3c_remove(struct platform_device *pdev)
> +{
> +	struct dw_i3c_master *dw_i3c = platform_get_drvdata(pdev);
> +
> +	return dw_i3c_common_remove(dw_i3c);
> +}
> +
> +static const struct of_device_id ast2600_i3c_master_of_match[] = {
> +	{ .compatible = "aspeed,ast2600-i3c", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ast2600_i3c_master_of_match);
> +
> +static struct platform_driver ast2600_i3c_driver = {
> +	.probe = ast2600_i3c_probe,
> +	.remove = ast2600_i3c_remove,
> +	.driver = {
> +		.name = "ast2600-i3c-master",
> +		.of_match_table = of_match_ptr(ast2600_i3c_master_of_match),

given this is probably an of-device only, of_match_ptr not needed here?

> +	},
> +};
> +module_platform_driver(ast2600_i3c_driver);
> +
> +MODULE_AUTHOR("Jeremy Kerr <jk@codeconstruct.com.au>");
> +MODULE_DESCRIPTION("ASPEED AST2600 I3C driver");
> +MODULE_LICENSE("GPL");
Jeremy Kerr March 31, 2023, 2:04 a.m. UTC | #2 
Hi Ben,

Thanks for the review. Comments inline:

> How about wrapping the dw_i3c_master struct in an as2600_master struct
> and then you can use container of, and simply do sizeof(struct
> ast2600_master) ?
> 
> Also removes the need below to set pdata at-all

Yep, sounds good, and avoids my quirky pointer arithmetic below that.

> > +static struct platform_driver ast2600_i3c_driver = {
> > +       .probe = ast2600_i3c_probe,
> > +       .remove = ast2600_i3c_remove,
> > +       .driver = {
> > +               .name = "ast2600-i3c-master",
> > +               .of_match_table =
> > of_match_ptr(ast2600_i3c_master_of_match),
> 
> given this is probably an of-device only, of_match_ptr not needed
> here?

Ack, will remove.

Thanks,


Jeremy
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index bd8ebc25afcf..ecadd5ccf771 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9714,6 +9714,12 @@  S:	Orphan
 F:	Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
 F:	drivers/i3c/master/dw*
 
+I3C DRIVER FOR ASPEED AST2600
+M:	Jeremy Kerr <jk@codeconstruct.com.au>
+S:	Maintained
+F:	Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
+F:	drivers/i3c/master/ast2600-i3c-master.c
+
 I3C SUBSYSTEM
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-i3c@lists.infradead.org (moderated for non-subscribers)
diff --git a/drivers/i3c/master/Kconfig b/drivers/i3c/master/Kconfig
index 3b8f95916f46..90dee3ec5520 100644
--- a/drivers/i3c/master/Kconfig
+++ b/drivers/i3c/master/Kconfig
@@ -22,6 +22,20 @@  config DW_I3C_MASTER
 	  This driver can also be built as a module.  If so, the module
 	  will be called dw-i3c-master.
 
+config AST2600_I3C_MASTER
+	tristate "ASPEED AST2600 I3C master driver"
+	depends on DW_I3C_MASTER
+	depends on ARCH_ASPEED || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Support for ASPEED AST2600 I3C Controller.
+
+	  This hardware is an instance of the DW I3C controller; this
+	  driver adds platform- specific support for AST2600 hardware.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ast2600-i3c-master.
+
 config SVC_I3C_MASTER
 	tristate "Silvaco I3C Dual-Role Master driver"
 	depends on I3C
diff --git a/drivers/i3c/master/Makefile b/drivers/i3c/master/Makefile
index b3fee0f690b2..3e97960160bc 100644
--- a/drivers/i3c/master/Makefile
+++ b/drivers/i3c/master/Makefile
@@ -1,5 +1,6 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CDNS_I3C_MASTER)		+= i3c-master-cdns.o
 obj-$(CONFIG_DW_I3C_MASTER)		+= dw-i3c-master.o
+obj-$(CONFIG_AST2600_I3C_MASTER)	+= ast2600-i3c-master.o
 obj-$(CONFIG_SVC_I3C_MASTER)		+= svc-i3c-master.o
 obj-$(CONFIG_MIPI_I3C_HCI)		+= mipi-i3c-hci/
diff --git a/drivers/i3c/master/ast2600-i3c-master.c b/drivers/i3c/master/ast2600-i3c-master.c
new file mode 100644
index 000000000000..d3d7b7d19f22
--- /dev/null
+++ b/drivers/i3c/master/ast2600-i3c-master.c
@@ -0,0 +1,169 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 Code Construct
+ *
+ * Author: Jeremy Kerr <jk@codeconstruct.com.au>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "dw-i3c-master.h"
+
+/* AST2600-specific global register set */
+#define AST2600_I3CG_REG0(idx)	(((idx) * 4 * 4) + 0x10)
+#define AST2600_I3CG_REG1(idx)	(((idx) * 4 * 4) + 0x14)
+
+#define AST2600_I3CG_REG0_SDA_PULLUP_EN_MASK	GENMASK(29, 28)
+#define AST2600_I3CG_REG0_SDA_PULLUP_EN_2K	(0x0 << 28)
+#define AST2600_I3CG_REG0_SDA_PULLUP_EN_750	(0x2 << 28)
+
+#define AST2600_I3CG_REG1_I2C_MODE		BIT(0)
+#define AST2600_I3CG_REG1_TEST_MODE		BIT(1)
+#define AST2600_I3CG_REG1_ACT_MODE_MASK		GENMASK(3, 2)
+#define AST2600_I3CG_REG1_ACT_MODE(x)		(((x) << 2) & AST2600_I3CG_REG1_ACT_MODE_MASK)
+#define AST2600_I3CG_REG1_PENDING_INT_MASK	GENMASK(7, 4)
+#define AST2600_I3CG_REG1_PENDING_INT(x)	(((x) << 4) & AST2600_I3CG_REG1_PENDING_INT_MASK)
+#define AST2600_I3CG_REG1_SA_MASK		GENMASK(14, 8)
+#define AST2600_I3CG_REG1_SA(x)			(((x) << 8) & AST2600_I3CG_REG1_SA_MASK)
+#define AST2600_I3CG_REG1_SA_EN			BIT(15)
+#define AST2600_I3CG_REG1_INST_ID_MASK		GENMASK(19, 16)
+#define AST2600_I3CG_REG1_INST_ID(x)		(((x) << 16) & AST2600_I3CG_REG1_INST_ID_MASK)
+
+#define AST2600_DEFAULT_SDA_PULLUP_OHMS		2000
+
+struct ast2600_i3c_platform_data {
+	struct regmap *global_regs;
+	unsigned int global_idx;
+	unsigned int sda_pullup;
+};
+
+static int ast2600_i3c_pullup_to_reg(unsigned int ohms, u32 *regp)
+{
+	u32 reg;
+
+	switch (ohms) {
+	case 2000:
+		reg = AST2600_I3CG_REG0_SDA_PULLUP_EN_2K;
+		break;
+	case 750:
+		reg = AST2600_I3CG_REG0_SDA_PULLUP_EN_750;
+		break;
+	case 545:
+		reg = AST2600_I3CG_REG0_SDA_PULLUP_EN_2K |
+			AST2600_I3CG_REG0_SDA_PULLUP_EN_750;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (regp)
+		*regp = reg;
+
+	return 0;
+}
+
+static int ast2600_i3c_init(struct dw_i3c_master *master)
+{
+	struct ast2600_i3c_platform_data *pdata = master->platform_data;
+	u32 reg = 0;
+	int rc;
+
+	/* reg0: set SDA pullup values */
+	rc = ast2600_i3c_pullup_to_reg(pdata->sda_pullup, &reg);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(pdata->global_regs,
+			  AST2600_I3CG_REG0(pdata->global_idx), reg);
+	if (rc)
+		return rc;
+
+	/* reg1: set up the instance id, but leave everything else disabled,
+	 * as it's all for client mode
+	 */
+	reg = AST2600_I3CG_REG1_INST_ID(pdata->global_idx);
+	rc = regmap_write(pdata->global_regs,
+			  AST2600_I3CG_REG1(pdata->global_idx), reg);
+
+	return rc;
+}
+
+const struct dw_i3c_platform_ops ast2600_i3c_ops = {
+	.init = ast2600_i3c_init,
+};
+
+static int ast2600_i3c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct ast2600_i3c_platform_data *pdata;
+	struct of_phandle_args gspec;
+	struct dw_i3c_master *dw_i3c;
+	int rc;
+
+	dw_i3c = devm_kzalloc(&pdev->dev, sizeof(*dw_i3c) + sizeof(*pdata),
+			      GFP_KERNEL);
+	if (!dw_i3c)
+		return -ENOMEM;
+
+	pdata = (void *)(dw_i3c + 1);
+
+	rc = of_parse_phandle_with_fixed_args(np, "aspeed,global-regs", 1, 0,
+					      &gspec);
+	if (rc)
+		return -ENODEV;
+
+	pdata->global_regs = syscon_node_to_regmap(gspec.np);
+	of_node_put(gspec.np);
+
+	if (IS_ERR(pdata->global_regs))
+		return PTR_ERR(pdata->global_regs);
+
+	pdata->global_idx = gspec.args[0];
+
+	rc = of_property_read_u32(np, "sda-pullup-ohms", &pdata->sda_pullup);
+	if (rc)
+		pdata->sda_pullup = AST2600_DEFAULT_SDA_PULLUP_OHMS;
+
+	rc = ast2600_i3c_pullup_to_reg(pdata->sda_pullup, NULL);
+	if (rc)
+		dev_err(&dw_i3c->base.dev, "invalid sda-pullup value %d\n",
+			pdata->sda_pullup);
+
+	dw_i3c->platform_ops = &ast2600_i3c_ops;
+	dw_i3c->platform_data = pdata;
+	rc = dw_i3c_common_probe(dw_i3c, pdev);
+
+	return rc;
+}
+
+static int ast2600_i3c_remove(struct platform_device *pdev)
+{
+	struct dw_i3c_master *dw_i3c = platform_get_drvdata(pdev);
+
+	return dw_i3c_common_remove(dw_i3c);
+}
+
+static const struct of_device_id ast2600_i3c_master_of_match[] = {
+	{ .compatible = "aspeed,ast2600-i3c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ast2600_i3c_master_of_match);
+
+static struct platform_driver ast2600_i3c_driver = {
+	.probe = ast2600_i3c_probe,
+	.remove = ast2600_i3c_remove,
+	.driver = {
+		.name = "ast2600-i3c-master",
+		.of_match_table = of_match_ptr(ast2600_i3c_master_of_match),
+	},
+};
+module_platform_driver(ast2600_i3c_driver);
+
+MODULE_AUTHOR("Jeremy Kerr <jk@codeconstruct.com.au>");
+MODULE_DESCRIPTION("ASPEED AST2600 I3C driver");
+MODULE_LICENSE("GPL");