[v3,0/4] iio: add driver for ping))) and laserping sensors

Message

Andreas Klinger Nov. 18, 2019, 7:35 a.m. UTC

This patchset adds support for parallax PING))) and LaserPING sensors as
iio driver. The driver is derived from srf04 but the device is using only
one GPIO for both triggering and the echo.

Changes in v3:
Thanks to Jonathan who found another bug there are two small changes:
- fix inconsistent use of devm_request_irq() and free_irq()
- hold mutex until free_irq() is called

Changes in v2:
Thanks to the reviews of Jonathan, Rob and Michel there are some
improvements:
- optimize use of macros with to_platform_device() and
  of_device_get_match_data()
- change spacing and typos
- simplify ascii art timing diagram
- merge patch for driver and corresponding Kconfig and Makefile

Andreas Klinger (4):
  dt-bindings: add vendor prefix parallax
  dt-bindings: add parallax ping sensors
  iio: ping: add parallax ping sensors
  MAINTAINERS: add maintainer for ping iio sensors

 .../bindings/iio/proximity/parallax-ping.yaml      |  51 ++++
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 MAINTAINERS                                        |   7 +
 drivers/iio/proximity/Kconfig                      |  15 +
 drivers/iio/proximity/Makefile                     |   1 +
 drivers/iio/proximity/ping.c                       | 333 +++++++++++++++++++++
 6 files changed, 409 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
 create mode 100644 drivers/iio/proximity/ping.c